Versatile Corsets Valerian Overbust Review

This entry is a summary of the review video “Versatile Corsets Valerian Overbust Review” which you can watch on YouTube here:

Fit, length Front is about 16″ inches long, and full length is 17″ over the bust. Modern Elizabethan or slim silhouette (*although please read the Final Thoughts section). A bit of a longline corset; comes over the hips and includes expandable hip ties. Good for women with an long torso; shorter torso probably not advised to wear this unless you get custom sizing. Will accommodate at least E cups, has a demure neckline and built-in off-the-shoulder adjustable straps that can accommodate broader shoulders. Has a high back that gives no opportunity for muffin top.
Material 3 main layers: the lining is 100% cotton American coutil, fashion fabric is a heavyweight satin that is possibly interfaced (I didn’t take it apart) and it has a tulle/lace overlay.
Construction 5 panel pattern. Unique pattern which gives a very flat front yet accommodates a full hip and bust; almost all the panels are angled in a V-shape towards the bottom front. Coutil is flatlined/rollpinned to satin and tulle; top-stitching between panels (seams are double-stitched at minimum), external boning channels. The seams that contain the hip ties are lock-stitched as it helps the seam lay flat and gives a neater finish. Also has 8 garter tabs.
Binding Black binding that matches the external boning channels, made from bias strips of satin.
Waist tape 1″ wide petershame waist tape exposed on the inside.
Modesty panel Attached 6″ wide fabric lacing protector on the back, covered in the same silver satin and tulle overlay, stitched on one side of the corset; unstiffened placket under busk.
Busk Standard flexible busk (1/2″ wide on each side) about 13″ long (6 pins), with a 3/8″ wide flat steel bone on each side. The rest of the length on top of the busk includes grommets to tie at the bustline.
Boning 22 total steel bones not including busk. On each side, 8 spirals (1/4″ wide) double boned on the seams, 2 flats (1/4″ wide) sandwiching the grommets and another flat bone beside the busk.
Grommets 34 grommets total, size #00 two-part grommets with moderate flange; set equidistantly, no splits, no wear/fraying/pulling out of grommets. This corset has a very long back, hence so many grommets.
Laces Strong nylon cord-style laces; they’re thin, strong and they are long enough but quite slippery.
Price Currently $438 USD for the standard size on the Versatile website (right now they’re having a 20% off sale on all their corsets – enter the coupon code FIREWORKS).

Final Thoughts:

This is the first of several corsets I will be reviewing for Versatile Corsets/ Corset Connection. I was so thrilled to have the opportunity to meet the owner of both sister sites, and she was generous to loan me these samples for review. The samples will later be returned and sold at great discount.

I do notice one difference in the construction of this one compared to the Mimosa (which I had reviewed last year) – the waist tape in the Valerian is exposed. I speculate that this difference is due to the Valerian having external boning channels instead of having the bones sandwiched between multiple layers; whereas my Mimosa overbust has the bones sandwiched between multiple layers. If the tape on the Valerian corset were sandwiched between the coutil and the fashion fabric, it may have left an undesirable outline on the outside of the corset.

Aesthetically I do prefer the more dramatic wasp-waist silhouettes, so if I were to go back and buy this again, I may invest in a smaller size. I was not the right model to show off the curves of this corset effectively because it’s a size 26″, and I could probably fit a size 22″ with the proportions of this standard-size corset. It’s very roomy in the bust and the hip ties can accommodate 6-8 extra inches in the hips. To the left you’ll see this exact same corset on a model who fills it out more appropriately.

 The Valerian corset is available in various color combinations as you can choose the main fabric, have a choice of lace overlay, then trim, external boning channels, and binding. I’m glad that I had the opportunity to see the differences in construction between the various different corsets depending on the styling choices.

Overall, I am glad I had the opportunity to try on this corset. Although I usually prefer Victorian, Edwardian or 50’s wasp-waist styles, this Elizabethan-inspired corset was lovely to try on and the construction was a joy to study. I’m tempted to try other Elizabethan-inspired corsets in the future. To see other models in the Valerian corset, Versatile has a small gallery so you can see how it fits different people. You can see it on their website here.

Leave a comment

Leave a Reply

Your email address will not be published. Required fields are marked *

2 comments on “Versatile Corsets Valerian Overbust Review

  1. What do you think of waist tape on the inside? I find it uncomfortable. For tight lacing I want smooth curves and very flat seams against my skin. For single layer corsets I have made myself I put the tape on the outside. Not as elegant but it does not look that bad. But then, I wear my corset under clothing and theses corsets are ment to be worn on the outside, and maybe not that long.

    • Hi Tom – I personally find it fine. I have other corsets that are high quality yet have internal waist tape, like my Electra Designs overbust – to add a liner in that situation costs more. Because this is an overbust that likely won’t be used on a daily basis for waist training, I find it acceptable. If this were to be used in a training corset, one may consider that less comfortable but then I always wear a stretch liner between myself and the corset in that situation.

%d bloggers like this: