Posted on 2 Comments

Review: Emerald Queen Art Bespoke Silver Ribbon Corset

This entry is a summary of the review video “Review: Custom Silver Ribbon Cincher (Court of the Emerald Queen)”. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here. See the quick stats in the table below the video, and my written personal opinion at the bottom!

Quick Stats:

Fit, length Custom drafted to my measurements: Center front is 13 inches long, princess seam is 11 inches (5.5 inches from the waist up, 5.5 inches from the waist down), the side seam is 10.5 inches and the center back is 13.5 inches long — longer than the average ribbon corset.
Rib spring is 7″, hip spring is 12″. Ribs are relatively conical and brings in the floating ribs, hip is more curved than usual in a ribbon cincher.
Material Essentially one layer of synthetic ribbon. Vertical panels at center front, side, and back are lined in black herringbone coutil.
Pattern Ribbon cinchers may be considered one of two ways: all horizontal pieces are considered a single pattern piece (in which case there are ~2 main “pattern pieces”) or you can consider every piece of ribbon its own pattern piece (in which case this corset has 14 “pattern pieces”) and the vertical ribbons don’t necessarily affect the shape.
Construction Straightforward single-layer construction; the horizontal ribbons are sandwiched between layers of coutil in the vertical panels at the center front, side, and center back.
Waist tape By default, most ribbon cinchers do not have a waist tape – however, if one single long piece of ribbon were used at the waistline (not cut into individual pieces at the seams), this would essentially function identical to a waist tape.
Binding Instead of separate binding sewn onto the vertical panels, Urszula chose to fold under the ribbon and stitched tidily to make a kind of “self binding” and finish the raw edges. The horizontal ribbons don’t need any binding as their edges are finished.
Modesty panel Back modesty panel is boned and suspended on the laces, 5.5″ wide, made from two layers of black coutil. A vertical piece of ribbon runs down the center so that if the corset were worn with a >2.5 inch gap, the modesty panel would match the rest of the corset. The modesty placket in front is 3/4″ wide, made from matching ribbon, and the center front is expertly mirror-matched (a great attention to detail).
Busk Standard flexible busk (1/2″ on each side), 11 inches long, 5 loops and pins with the bottom two closer together for better control at the lower tummy. Adjacent flat steels add more rigidity.
Boning 16 bones total in this corset, 8 on each side (not including busk or modesty panel). On each side: one flat steel adjacent to the busk, 3 flat steels in the center back panel, and 4 spiral steels all butted next to one another in the side panel.
Grommets There are 28, two-part size #0 grommets (14 on each side). They have a medium flange and are spaced a bit closer together at the waistline, and finished in silver. They may be Prym brand 2-part eyelets, which are high quality and tend to roll nicely and not pull out.
Laces The laces are 1/2″ wide black double-faced (DF) satin lacing. They have no spring or stretch, they are lovely and flat so they wear nicely under clothing, the satin is a bit slippery but it holds bows and knots well (if tied properly).
Price The price for a custom ribbon cincher from the Emerald Queen Art ranges from $170 – $250 USD, and of course since this is a custom commission, you can choose any ribbon that Urszula can source, or possibly provide your own if it’s high enough quality. You can start a custom commission by messaging Emerald Queen Art on Etsy.

Final Thoughts:

I’m going to get right to the point: this is my new favorite ribbon corset. As I progress through my corset journey, I find more and more that I’m gravitating towards more lightweight, flexible, breezier corset with an expertly patterned silhouette designed for cinching while accommodating my body’s natural idiosyncrasies, instead of working against them or forcing my body into a silhouette not right for my frame. And this custom ribbon corset felt almost like a second skin the moment I put it on.

Most ribbon cinchers are somewhat U-shaped in silhouette and are not designed to accommodate any convex curves around the ribcage or dramatically wrap around a hip shelf, but Urszula (the Emerald Queen herself) has somehow discovered a way to do it.

I love how Urszula mirror matched the vertical ribbons in the center front and center back – a fantastic attention to detail. It might seem like a small thing to others, but to incorporate a modesty placket in the front (thus creating a structurally asymmetric garment on the left and right halves) but still a thoughtfully mirrored center front aesthetically requires some planning and careful placement.

One thing that I love about this corset is the flexible busk and how it plays with the pattern and silhouette of the corset itself, creating a soft inward curve at the center front while still keeping the lower tummy relatively flat. Some of you may remember my previous post on how different corsets create different silhouettes in the side-view, which many consider a feature and not a bug. While I usually like a corset with a more rigid busk and straight front, I have to admit that the profile in this corset and the slight curve in the front is both comfortable and flattering on my figure.

While the modesty panel contains plastic bones instead of steel bones, I don’t mind this — I’ve seen plastic bones in modesty panels of other corset brands (and in fact, in previous sewing tutorials, I have used plastic myself to stiffen modesty panels). The primary concern around plastic bones is that they may warp or kink when put under a strong curve on the body — but when it comes to modesty panels, they typically don’t curve on the body much at all, unless you count the gentle swoop of the lumbar curve. The biggest advantage to plastic bones in a modesty panel is that the panel can be removed and hand-washed on a regular basis without worry of the bones rusting with repeated exposure to water.

Emerald Queen Art has extremely affordable prices for custom (it’s a well-observed trend that many corsetieres in Poland tend to offer lower prices), where her custom corsets can be less than many higher-end OTR corsets. This would be a great entry-point option for someone just starting to dip their toe into the world of bespoke corsetry. You can start a custom commission by messaging Emerald Queen Art on Etsy.

Do you have a piece by The Court of the Emerald Queen? What do you think of it? Leave a comment down below!

Posted on 1 Comment

Restyle CU8 Burgundy Underbust Corset Review

This entry is a summary of the review for the “CU8 Burgundy Underbust”¬†hourglass corset, made by Restyle.pl. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

 

Fit, length Center front is 10.5 inches long, the princess seam is 9.5 inches (4.5 inches above the waist, 5 inches below the waist), the side seam is 9.5 inches and the center back is 10.5 inches long.
When I measured this before wearing, the ribcage was 30.5″, the waist was 22″ and the hip was 36″.
The waist and hips matched their measurements on the size chart, but the ribcage was a bit smaller (ribs are stated to be 31.5″ on the site).
Material The fashion fabric is polyester-based burgundy satin, with black mesh overlay on the side panels and a couple of contrasting black satin boning channels. The lining is black cotton twill.
Construction 6-panel pattern (12 panels total). Panel 1 is wide and panel 2 is skinny, probably for aesthetic effect. Panels 3-4-5 make the curve over the hip.
Constructed with the welt-seam method.
Waist tape One-inch-wide¬†waist tape, secured “invisibly” between the layers of fabric. Full width (extends from center front panel to center back).
Binding Black satin bias tape, machine stitched with a slight top-stitch on both outside and inside (may have been done on a single pass with a special attachment). 4 tiny garter tabs, 2 on each side.
Modesty panel Just short of 7 inches wide, finished in burgundy satin and black twill. Unstiffened, attached to one side of the corset with stitching (easily removed if desired). In the front, there is a 3/4 inch wide modesty placket, finished in matching burgundy satin, slightly stiffened.
Busk 9.5‚ÄĚ long, with 5 loops and pins,¬†equidistantly spaced. Very slightly wider than a standard flexible busk, and slightly stiffer too. It’s also black powder coated for a matte black finish.
Boning 22 bones total in this corset, 11 on each side.¬†Single boned on the seams and also single boned in the middle of the panels with ¬ľ inch wide spirals. The bones sandwiching the grommets are flat steels, ¬ľ wide as well.
Grommets There are 24, two-part size #00 grommets (12 on each side). They have a small-to-medium flange and are spaced equidistantly, and finished in black powder coating as well. Rolled nicely in the back, and small washers present.
Laces ¬ľ inch wide, black, flat, nylon, shoelace style lacing (standard workhorse laces).
Price Available in black cotton, mesh, this burgundy satin, and several colors of brocade.
Sizes range from 18″ to 34″.
This style (burgundy CU8) is $50.49 USD

 

Final Thoughts:

Me (Lucy) wearing the CU8 corset

 

I have to admit, Restyle has been killing it lately with cute, curvaceous and shockingly inexpensive corsets that start around $50. It is not a perfect fit (the hips are several inches too large for me, which is more noticeable in the back than it is in the front). However, construction-wise, this corset somehow hits my bar of standards for most OTR corsets today, and even includes some of my more favorite features: equidistantly-placed bones (one in the middle of the panel and one on the seams Рinstead of being just double boned on the seams), and black hardware (powder-coated busk and grommets).

Poland’s OTR corsetry trifecta (Restyle, Rebel Madness, and PaperCats) are breaking all the rules regarding “you get what you pay for”, as I’ve tried corsets over $200 which was not nearly as comfortable or well-made as these corsets. Part of me is wondering¬†if the other shoe is eventually going to drop (I do hope manufacturing methods are ethical), while the other part says to not mess with a good thing.

Restyle’s corsets are designed more for slightly pear-shaped people, with both their ‘WH’ and their ‘CU’ style corsets able to accommodate around a 14-inch hip spring. Much of their hip spring is distributed a bit more towards the back of the body as opposed to directly on the sides; this might be an indication that the corsets were drafted to be worn with a lacing gap in the back, so the hip spring is angled forward slightly – but it might also be good for some people who have a bigger booty and need more space along the back.

Check out Restyle’s corset selection on their website here.

Posted on 6 Comments

Camellia’s Corsets: Short Torso Mesh Cincher / Waspie Review

This entry is a summary of the review for the “Camellias Women Petite Steel Boned Waist Trainer Corset Short Torso Mesh Body Shaper” made by Camellia’s Corsets on Amazon. Note: I purchased this corset with my own money and reviewed this of my own volition. Amazon affiliate links help¬†support my site and¬†the price¬†does not increase for you.¬†If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

 

Fit, length Center front is 9.5 inches long, the princess seam is 8.5 inches (4.5 inches above the waist, 5 inches below the waist), the side seam is 8.25 inches and the center back is 9 inches long.
I chose the size 24″. When I measured this before wearing, the ribcage was 26.5″ (rib spring of 2.5″), the waist was 23.5″ laid flat, (which stretched to 24″ while I was pulling on it with my hands), and the hip was 30″ (hip spring of 6″).
Material The panels are made from what appears to be 2 different types of mesh, but they’re actually attached to one another. The outer one is a honeycomb, fishnet appearance, which we so often see in many other OTR mesh corsets. The layer underneath is a sort of finer-weave mesh, and it has a bouncy, foamy kind of plush feel. The fabric content says 90% polyester, and 10% spandex so it has some give. The binding and boning channels are thin cotton twill.
Construction 6-panel pattern (12 panels total). Panel 1-2-3 converge downwards, and panels 4-5 create the curve over the hip.
The panels were assembled together with seam allowances facing outside, topstitched on the underside Рand then cotton boning channels laid down on the outside, single boned on the seams.
Waist tape One-inch-wide waist tape, made from black single-faced satin ribbon and secured down at each boning channel. Almost full width (extends from serged seam near panel 1, to the boning channel by the back grommets.
Binding Black cotton twill, machine stitched with a slight top-stitch on both outside and inside (may have been done on a single pass). No garter tabs, but there are two loops at the top to hang it from.
Modesty panel Just under 6″ wide, unstiffened, finished in 2 layers of black twill, and attached to one side with a row of stitching.
In the front, there is a 3/4 inch wide modesty placket extending from the knob side of the busk, unstiffened and finished in black twill.
Busk 8.5‚ÄĚ long, with 5 loops and pins,¬†equidistantly spaced. Slightly wider than a standard flexible busk, around 3/4″ wide on each side, and about the same flexibility as a standard flexible busk.
Boning 14 bones total in this corset,¬†7 on each side.¬†Single boned on the seams with ¬ľ inch wide spirals. The bones sandwiching the grommets are flat steels, also¬†¬ľ inch wide.
Grommets There are 18, two-part size #00 grommets (9 on each side). They have a small flange and are spaced equidistantly, and finished in silver. Washers present in the back. The grommets at the waist feel very slightly loose in the back after half a dozen wears (2 inch reduction) but have not fallen out yet.
Laces ¬ľ inch wide, black, flat, nylon, shoelace style lacing (standard workhorse laces).
Price Available in black mesh and white mesh, both $35 on Amazon.

 

Camellia’s Corsets mesh short torso / waspie / cincher, $34.99. Picture courtesy of Amazon (click through for listing).

Final Thoughts:

I was surprised by the curvy, round-rib¬†silhouette it gave, but the fabric is quite moldable to the body because the label states it’s 10% spandex. Although the binding and the waist tape hold the top edge, waist and bottom edge from stretching too much, it definitely has a lot of give.

My corset measured a bit small in the waist when I initially received it, but I could also tell that it did expand over time as I wore it in more Рso perhaps they deliberately run a bit small in anticipation of some stretch. If you need considerable mobility, this piece will provide you with that, but expect some ease to also occur over time.

One part I wasn’t aesthetically crazy about was the fact that the fabric gave too much at the boning channels, allowing the steel bones to “flare” away from the body (especially at the hips), creating little spots where they poke out. This gives the impression that the corset isn’t pulled taut against the body, when really the binding is quite snug against my hips but the bones simply don’t lie flat.

Also, the waist tape was found to be uneven on each side at the center front – I would have cared if it were uneven in the back, but as the flaw is front and center, this is unfortunately quite noticeable through the transparent mesh.

The fabric by the back grommets and around the busk seems to not be reinforced with any interlining, which is a concern for longevity. I do see that the grommets are shifting slightly over time as I’ve worn this corset in, although none have fallen out yet. Camellia’s Corsets only recommends 2-3 inch waist reduction in these corsets, so I would not advise this for tightlacing, but more for a temporary gentle cinch and fashion use.

Learn more about the cincher on Amazon.

Posted on 4 Comments

Timeless Trends Galaxy Mesh Corset Review

This entry is a summary of the review for the “Galaxy Mesh” hourglass standard length corset.¬†If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

Full disclosure: The hourglass corset featured in this review is one of the four new designs I helped create for Timeless Trends in 2015, and I am a retailer for Timeless Trends. If you’re interested in learning more about the corset and you would like to support this site, I’m incredibly proud to say that the galaxy mesh corsets (and over 100 other styles of TT corsets) are available here in my shop!

Fit, length Center front is 11.5 inches long, the princess seam is 10 inches (5.5 inches above the waist, 4.5 inches below the waist), the side seam is 9.5 inches and the center back is 13 inches long.
When I measured this before wearing, the ribcage was 28.5″ (rib spring of 6.5″), the waist was 22″ and the hip was 32″ (hip spring of 10″). Gently rounded ribcage and cut over the hips, just meeting the iliac crest.
Material Single layer of good quality synthetic corsetry mesh, which stretches less than the “fishnet” style netting in many other OTR corsets. The front and back layers are made from¬†the galaxy mesh fabric which is soft to the touch, like a really soft jersey, not quite flocked but brushed material – and that is laminated directly to cotton twill. The boning channels are also made with this¬†reinforced galaxy material.
Construction 6-panel pattern (12 panels total). Panel 1-2 converge downwards, and panels 3-4 make the curve over the hip.
The panels were assembled together and boning channels laid down on outside – one bone on the seams and one bone in the middle of the panel. On the inside where the seams are, plush velvet ribbon was laid down to protect your skin against any pokey seams from the mesh.
Waist tape One-inch-wide waist tape, made from black grosgrain ribbon and secured down at each boning channel. Full width (extends from center front panel to center back).
Binding Matching strips of galaxy fabric, machine stitched with a slight top-stitch on both outside and inside (may have been done on a single pass). No garter tabs in this corset as they would be visible under the mesh.
Modesty panel By default, TT corsets don’t come with a back modesty panel, but boned and floating modesty panels are available for separate purchase.
In the front, there is a 1/2 inch wide modesty placket, finished in matching galaxy fabric.
Busk 10‚ÄĚ long, with 5 loops and pins,¬†equidistantly spaced. Standard flexible busk, which is reinforced with a flat steel adjacent on either side.
Boning 24 bones total in this corset, 11 on each side.¬†Single boned on the seams and also single boned in the middle of the panels with ¬ľ inch wide spirals. The bones sandwiching the grommets are flat steels, 3/8″ wide, as well as the flat steels adjacent to the busk.
Grommets There are 28, two-part size #0 grommets (14 on each side). They have a small flange and are spaced equidistantly, and finished in gunmetal grey / pewter. Rolled nicely in the back, and washers present.
Laces ¬ľ inch wide, black, flat, nylon, shoelace style lacing (standard workhorse laces).
Price Available in galaxy mesh, but also a plain black mesh is coming in the future!
Sizes range from 18″ to 36″, $119 USD.

 

Galaxy Mesh hourglass standard length underbust corset. Pattern by Lucy’s Corsetry, styling by Vanyanis, and produced by Timeless Trends.

Final Thoughts:

While the pattern of the hourglass corset was on myself and Sarah (and about 2.5 years old now so nothing new), the stylist, Lowana of Vanyanis, definitely outdid herself on this piece. For many years, TT and myself had said that we might not ever carry mesh corsets – when the factory had experimented with using mesh as a corset material in the past, it was often sports mesh / fishnet style material that’s so popular nowadays, but they hadn’t been able to find a way to have the corset withstand the longevity tests. TT and myself have a lifetime warranty on all our corsets, but most types of affordable mesh simply can’t last a lifetime, and we wanted to be able to confidently stand by our guarantee.

However, during her last trip to Bangkok, Lowana was able to source the same good quality corsetry mesh used by so many reputable corsetieres, and it completely changed our stance on mesh corsets! I can also tell Lowana’s input in the spacing of the boning (one on the seams and one in the middle of the panels for a more even and comfortable distribution), and her characteristic velvet ribbon protecting the wearer from the seam allowances on the inside (corsetry mesh can be “pokey” when cut and the velvet adds a cushion).

If you’re interested in learning more about the corset and you would like to support this site, I’m incredibly proud to say that the galaxy mesh corsets (and over 100 other styles of TT corsets) are available here in my shop!

Posted on Leave a comment

Glamorous Corset “Jenna” Sweetheart Overbust Review

This entry is a summary of the review for the “Jenna” overbust¬†corset¬†in blue satin, made by Glamorous Corset. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

 

Fit, length Center front is just short of 15 inches long, the princess seam is 15.5 inches (9 inches above the waist, 6.5 inches below the waist), the side seam is 14 inches and the center back is 12.75 inches long.
Bust¬†spring is 7″,¬†hip spring is 9″. The silhouette is gentle (modern slim).
Material The fashion fabric is blue satin, and the lining is black cotton twill.
Construction 5-panel pattern (10 panels total). Panels 1-2 give space for the bust, and panels 2-3-4 make the curve over the hip. Constructed using the welt-seam method.
Waist tape One-inch-wide¬†waist tape, secured “invisibly” between the layers of fabric. Full width (extends from center front panel to center back).
Binding Matching strips of blue satin, machine stitched on both outside and inside. Stitched in the ditch on the outside, and topstitch inside. There are also 6 garter tabs (3 on each side).
Modesty panel 6 inches wide, unstiffened, made from satin¬†on the outside, and¬†black cotton twill on the inside. Attached to one side of the corset with a line of stitching (easily removed if desired). In the front, there is a¬†¬ľ inch wide modesty placket, finished in blue satin.
Busk 14‚ÄĚ long, with 6 loops and pins, the bottom two are a bit closer together.¬†Stainless steel busk which is very slightly wider and slightly stiffer than standard.
Boning 20 bones total in this corset, 10 on each side. Double boned on the seams with ¬ľ inch wide spirals. The bones sandwiching the grommets are flat steel (probably stainless steel).
Grommets There are 28, two-part size #00 grommets (14 on each side). They have a small / medium¬†flange and are spaced equidistantly, and finished in silver. There are a¬†few¬†splits on the underside of the grommets, and¬†due to the choice in laces, they don’t catch much.
Laces Black, ¬ľ‚ÄĚ wide flat nylon “workhorse” shoelace.¬†They are a bit springy, but they hold bows and knots well and they are long enough.
Price Available in sizes 18″ up to 30″ closed waist (in blue).
For black and white satin, size range is 18″ – 40″
For sizes 18-30″ the price is $79 USD, and sizes 32″ – 40″ are $84 USD.
Available on the Glamorous Corset website here.

 

Posted on 2 Comments

Rebel Madness Waist Trainer Corset Review

This entry is a summary of the review video “Rebel Madness Black Waist Trainer Corset¬†Review”. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

 

Fit, length Center front is 12 inches long, princess seam is 10 inches (5 inches from the waist up, 5 inches from the waist down), the side seam is 9.5 inches and the center back is 12 inches long.
Rib spring is 8″, lower hip spring is 10.5″ (different from the measurements on the website, which states a rib spring of 7″ and hip spring of 9″). Ribs are slightly conical, and the hips are cut up to stop just at the iliac crest.
Material 3 main layers – fashion fabric is a finer black twill, interlining is also lightweight cotton, and lining is a more coarse black twill (may be bull denim).
Construction 6-panel pattern (12 panels total). Panels 1-2 converge towards the lower tummy, panels 3-4 give space for the hips, and panels 4-5-6 give some space for the upper back. Panels were assembled with the welt seam method.
Waist tape One-inch-wide¬†waist tape, installed “invisibly” between the layers. It’s a full-width tape stretching from center front to center back.
Binding Commercially-sourced black cotton bias tape, machine stitched on both sides (probably on a single pass, possibly by using a special sewing machine attachment).
Modesty panel 6.25 inches wide, unstiffened, made from 2 layers of black cotton twill. Not sewn into¬†to the corset – it’s suspended on the laces using grommets.
There’s also a 1/2-inch-wide unstiffened black modesty placket in front, extending from the knob side of the busk.
Busk 10.5‚ÄĚ long, with 5 loops and pins, equidistantly spaced.¬†Standard flexible busk, with an additional ¬ľ” flat steel bone adjacent to the busk on each side.
Boning 16 bones total in this corset, 8 on each side. On each side, 5 of them are spirals about ¬ľ inch wide – single boned on the seams. One of the bones by the grommets is¬†spiral steel (so the back is a but more flexible than usual when lacing up) but the bones at the center back seam, on the outer edge of the grommets, are flat steel.¬†The bones adjacent to the busk are also flat steel.
Grommets There are 28, two-part size #0 grommets (14 on each side). They have a medium flange and are spaced equidistantly, and finished in black. They’re very nice quality (similar quality to Prym brand) and have rolled beautifully – definitely an improvement from the smaller silver grommets used in their old stock of corsets!
Laces The laces are black, ¬ľ‚ÄĚ wide nylon cord / shoelace.¬†They are a bit springy / spongey, but they hold bows and knots well and they are definitely long enough.
Price Available in black cotton (reviewed here) and black satin. Sizes 18″ up to 34″ closed waist.
As of 2017, the price is $83 USD. Find it here on Etsy.

 

Rebel Madness black cotton short trainer, $95 USD. Model unknown. Picture courtesy of Awin / Etsy.

Final Thoughts:

Rebel Madness’ corsets tend to be more lightweight and flexible compared to many other corsets at a comparable price range – so although this corset is advertised as a waist trainer, if you are used to your OTR corsets being more on the¬†thick or rigid side, do keep in mind that this will be more lightweight than you’re accustomed to.

The prices of Rebel Madness corsets are also extremely reasonable for an entry-level corset (I’ve noticed that corsets made in¬†Poland tend to be lower in price in general), at $83¬†in their Etsy shop.

Do you have this corset, or another corset from Rebel Madness? What do you think of it? Leave a comment down below!

Posted on 2 Comments

Orchard Corset CS-411 LONGLINE Review

This entry is a summary of the review video “CS-411 LONGLINE underbust (Orchard Corset) Review”. If you want visual close-ups, you can watch the video on YouTube here:

Fit, length Center front is 12 inches long, princess seam is 11 inches (5.5″ above the waist, 5.5″ below the waist), side seam is 10 inches and center back is 12.5 inches.
Underbust 28″ (6 inch rib spring), waist 22″, low hip 32″ (10 inch hip spring).
Material 3 main layers ‚Äď the fashion fabric is black cotton twill (also available in satin), flatlined to a sturdy cotton interlining, and lined in black twill again. Very stiff interlining in center front panel.
Construction 4-panel pattern (8 panels total). Constructed using the sandwich method.
Waist tape One-inch-wide waist tape running through the corset, hidden between the layers.
Binding Made from matching black cotton twill, machine stitched on both sides. Stitched in the ditch on the outside, and topstitch on the inside. There are no garter tabs.
Modesty panel Slightly under 6 inches wide, made of a layer of black satin and a layer of twill. Unstiffened, and attached to one side with a line of stitching (easily removed if desired).
The modesty placket in the front is also black twill and¬†¬ľ‚ÄĚ wide, extending from the knob side of the busk and not stiffened.
Busk 11″ long, with 5 loops and pins (last two are a bit closer together). Slightly heavier busk, slightly under an inch wide and fairly stiff.
Boning 16 bones total in this corset. On each side, 6 of them are spirals about ¬ľ‚ÄĚ wide (double boned on the seams) and then there are two flat steel bones, both ¬ľ‚ÄĚ wide sandwiching the grommets.
Grommets There are 24 two-part size #00 grommets (10 on each side), with a small flange, spaced equidistantly. On the underside there are many splits, but they don’t catch much on the laces due to the choice in laces.
Laces The laces are ¬ľ‚ÄĚ wide flat nylon shoe-lace style. I find them to be long enough and quite strong, but also rather springy.
Price Available in black cotton, black and white satin, and black brocade (I recommend the cotton finish for longevity and smoothness). Sizes go from 18″ up to 46″ closed waist.
Sizes 18″ to 32″ costs $72 USD ¬†| ¬†Sizes 34″ to 46″ costs $75 USD

 

Final Thoughts:

This was another one of those OTR corsets that I felt really indifferent towards as I took it out of the package, but it ended up giving a surprisingly really lovely silhouette once I wore it in for a time.

The silhouette of this longline CS-411 corset is reminiscent of the original CS-411 with sweeping lines and somewhat conical ribs. The hips are slightly more “cupped” below the iliac crest, however, compared to the original. I also feel that this version is slightly more curvaceous than their standard¬†CS-411, and that could be why it fits my body better – I do have a longer torso though, and I tend to believe that longline corsets are generally more flattering on my body so this could be influencing my opinion.

While this corset is available in a cotton fashion fabric and satin fashion fabric, I would personally recommend the cotton as it’s¬†is sturdier, doesn’t wrinkle as easily, is harder-wearing (doesn’t pull or fray as easily), abrasion-resistant and is generally better¬†at hiding wear and tear.

If you’re not a fan of the springy synthetic “workhorse” style shoelace that comes with this corset,¬†Orchard also carries has some higher quality laces (double-faced satin ribbon and paracord) in an assortment of colors.¬†I personally¬†much prefer their ribbon laces to the standard shoelace style laces, but paracord is said to be the strongest type of cord.

One thing to look out for is that the “bunny ears” are also consistently set high on the waist on Orchard Corsets (sometimes higher than the waist tape and always higher than my natural waist), but this is an easy fix – you just need to relace the corset, and I have a tutorial on that here.

See Orchard’s CS-411 longline corset on their website here, and remember that my ref code CORSETLUCY takes an additional 10% off your order (I don’t get any kickback from this coupon code, so use and share it freely).

Posted on 2 Comments

Glamorous Corset “Dita” Leather Underbust Review

This entry is a summary of the review for the “Dita” underbust corset¬†in black leather, made by Glamorous Corset. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

 

Fit, length Center front is just short of 12.75 inches long, the princess seam is 10.5 inches (5.5 inches above the waist, 5 inches below the waist), the side seam is also 10 inches and the center back is 13 inches long.
Rib spring is 7″,¬†hip spring is also 7″. The rib is ever so slightly cupped, but appears more conical.¬†The silhouette is a moderate¬†hourglass.
Material The fashion fabric is black leather (also available in satin or cotton fashion fabric), and the lining is black cotton twill.
Construction 6-panel pattern (12 panels total). This pattern may be designed to be worn with a slight gap in the back, because panel 4 has the most flare over the hip. Constructed using the welt-seam method.
Waist tape One-inch-wide¬†waist tape, secured “invisibly” between the layers of fabric. Full width (extends from center front panel to center back).
Binding Matching strips of black leather, machine stitched on both outside and inside. Small tidy topstitch on the outside, and raw inside (leather doesn’t fray). There are also 6 garter tabs (3 on each side).
Modesty panel 6 inches wide, unstiffened, made from leather on the outside, and¬†black cotton twill on the inside. Attached to one side of the corset with a line of stitching (easily removed if desired, but the leather may “scar”). In the front, there is a¬†¬ľ inch wide modesty placket, finished in black cotton.
Busk 11.5‚ÄĚ long, with 5 loops and pins, the bottom two are a bit closer together.¬†Standard flexible busk (¬†¬Ĺ” wide on each side) and the busk is slightly stiffer than standard.
Boning 24 bones total in this corset, 12 on each side. Double boned on the seams with ¬ľ inch wide spirals. The bones sandwiching the grommets are flat steel (probably stainless steel).
Grommets There are 24, two-part size #00 grommets (12 on each side). They have a small / medium¬†flange and are spaced equidistantly, and finished in silver. Only a few¬†splits on the underside of the grommets, and¬†due to the choice in laces, they don’t catch.
Laces The laces are black, ¬ľ‚ÄĚ wide flat nylon “workhorse” shoelace.¬†They are a bit springy, but they hold bows and knots well and they are long enough.
Price Available in sizes 18″ up to 40″ closed waist. Comes in black leather,¬†and also various shades of cotton and satin if you’re opposed to leather.
Leather corsets: Sizes 18″ – 30″ are $89 USD, and sizes 32″ – 40″ are $94 USD.
Non-leather corsets are a bit less expensive, at $69 USD.
Available on the Glamorous Corset website here.

 

Final Thoughts:

Dita underbust (shown here in satin instead of leather), model unknown. Starts at $69 USD. Click through to visit Glamorous Corset.

This corset would be a good fit for someone with ribs and hips that are the same size – so if you are athletic and have well developed lat muscles, or if you happen to have a fuller ribcage and / or a more narrow pelvis, this evenly-balanced corset will give space for your ribs while not flaring too much at the hips. However, if you’re more of a curvy hourglass or pear shape, you might feel more comfortable in a different style that won’t compress your hips.

This corset is one that I warmed to over time. The very first time I put it on, the leather was stiffer and the corset gave a gentle reduction and a silhouette that looks like “) (” parentheses, which is not my aesthetic favorite. But as I wore it in over time, the leather softened and it molded a bit better to my body, I saw its true silhouette come out and it gave me a kind of comic book “Superhero V” shaped torso that looks impressive on both men and women. As such, this corset would be great for cosplay and costumes (and yes, it comes in brown for my steampunk loving readers!).

So this is just another example where we should not judge a book by its cover (or rather, should not judge the corset straight out of the box!).

For those who are opposed to leather, this corset also comes in cotton and satin – although I can’t speak for their silhouette and fit being identical to this one once seasoned.

Find the Glamorous Corset Dita and other styles¬†in Glamorous Corset’s shop here.

Do you have the Dita corset, or another piece from Glamorous Corset? Let us know what you think of it in a comment below.

Posted on 3 Comments

Corsetry & Romance Custom Silver Underbust Review

This entry is a summary of the Corsetry & Romance Silver Sweetheart Underbust Review video. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

 

Fit, length (Custom fit) Center front is 11 inches long, the princess seam is 10 inches, the side seam is 12.5 inches and the center back is 15 inches long.
Circumferential measurements: underbust is 29″ (rib spring is 7″), waist is 22″, and hip is 33″ (hip spring is 11″). The ribcage is gently rounded, and the hips are very¬†cupped. Somewhat longline corset, and very high back.
Material The fashion is silver satin. The strength fabric / lining is black cotton twill. Both layers are heavily interfaced.
Construction 7-panel pattern (14 panels total). Palina says that the number of panels vary with the size of the corset (larger corsets can have as many as 11 panels per size), the complexity of the pattern, etc. Construction: fashion fabric was interfaced and panels assembled with a topstitch. Single boned on the seams. Lining is also interfaced, panels assembled and topstitched, but the lining is floating (not attached to the fashion fabric).
Waist tape TWO waist tapes in this corset, one attached to the fashion fabric and one attached to the lining. Both 1 inch wide, secured “invisibly” between the layers of fabric. Full width (center front to center back).
Binding Made from commercially sourced black satin bias binding, machine stitched on outside and hand-finished inside.
Modesty panel 4.5 inches wide, finished in matching silver satin on outside, and cotton inside. Boned with 3 horizontal and 2 vertical bones, and suspended on the laces with ribbon.
In the front there is a modesty placket, extending about 1/2″ out from the knob side of the busk, covered matching silver¬†satin.
Busk 10‚ÄĚ long, with 5 loops and pins, equidistantly spaced. Standard flexible busk (1/2″ on each side) and a bit flexible, but there are added flat steels adjacent to the busk to add stiffness. They are also gently curved to create a spoon busk effect.
Boning 18 bones total in this corset, 9 on each side. Single¬†boned on the seams with ¬ľ inch wide spirals. The bones sandwiching the grommets are flat steel. There are flat steels by the busk¬†as well. However, corsets with more panels may have more steels.
Grommets There are 36, two-part size #00 grommets (18 on each side). They have a medium flange and are spaced a bit closer together at the waistline, and finished in black. No splits on the underside, no damage to the fabric around the grommets.
Laces Black 1/2″ wide single-faced satin ribbon (glides well through the grommets, holds knots and bows securely, long enough).
Price Price for a made-to-measure underbust corset starts at only $130 USD plus the cost of materials. Overbusts start at $160 plus materials.
Embellishments cost extra (e.g. flossing is another $15 USD).


Final Thoughts:

Model: Me (Lucy Corsetry), Photo: Rosalind Guder Photography, Corset: Corsetry & Romance, boots from Aldo, blouse and earrings from Vanyanis.

Corsetry & Romance is a one-woman business in Poland, owned and operated by Palina.

This piece is exquisite and definitely underpriced for its quality. I gave Palina a huge amount of artistic license with this piece (to the point where I¬†didn’t even look at pictures before it was sent to me, so the final result was a total surprise!). I told her what colors and embellishments I like, and I gave her my measurements, and left the rest up to her.

The center front sweeps down to create an underbust sweetheart shape, but the top edge rises up to a very high back to hold in any “muffin top”. I find I can almost “lean back” in this corset and have ample back support, even along my thoracic spine.

The lovely Chantilly lace is sewn into the top binding around the underbust, and carefully gathered or “ruffled”¬†as it tapers towards the waistline. A delicate silver ribbon, just 1/8″ wide, is threaded¬†through the lace and fastens in a cute bow in the front.

The busk and some of the steels were carefully pre-bent to created a quasi-spoon-busk shape in the front and promote a certain posture and silhouette in this corset. On the loop side of the busk, it’s one continuous piece of fabric that wraps around the busk, with buttonholes for the loops to peek through which prevents any possibility of the center front seam ripping open.

The cording over the hips is one of my favorite features of this corset, as well as the bone flossing. There is a lot going on in this one little corset in terms of embellishment, but it was all tastefully combined to creates a beautifully elegant piece in the end, without being overwhelming or overdone.

The modesty panel and a storage bag are both included in the (already very low) price of this corset, and I honestly don’t know how Palina is able to work such magic with prices as low as she charges.

Corsetry & Romance has no official website at this time, but you can get in touch with Palina via her Facebook page.

Posted on Leave a comment

Rebel Madness “Ocean Lagoon” Mesh Underbust Corset Review

This entry is a summary of the review video “Rebel Madness “Boho” / “Ocean Lagoon” Mesh Corset¬†Review”. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

 

Fit, length Center front is 11 inches long, princess seam is 9.5 inches (4 inches from the waist up, 5.5 inches from the waist down), the side seam is 10 inches and the center back is 11 inches long.
Rib spring is 7″, lower hip spring is 14″. Ribs are slightly conical, but the mesh allows some flexibility in the ribs. I recommend this for someone with a high waist and full hips.
Material The mesh parts are single layer synthetic corsetry mesh. The front and back panels are 3 layers (fashion fabric is decorative lightweight cotton, another cotton interlining, and black twill lining).
Construction 6-panel pattern (12 panels total). Panels 2,3,4 and 5 all have some ease over the hip to create ample space over the hips. Panels were assembled with seam allowances facing outward (so as not to scratch the skin) and decorative lightweight cotton boning channels were laid down on the outside.
Waist tape One-inch-wide waist tape made from grograin ribbon, stitched on the inside of the corset (obviously also visible on the outside due to the mesh). Seems to be full width (center front panel to center back).
Binding Commercially-sourced black cotton bias tape, machine stitched on both sides (probably on a single pass, possibly by using a special sewing machine attachment).
Modesty panel 6.25 inches wide, unstiffened, made from 2 layers of black cotton twill. Not sewn into¬†to the corset – it’s suspended on the laces using grommets.
There’s also a 1/2-inch-wide unstiffened modesty placket in front, extending from the knob side of the busk, also covered in the same fashion fabric.
Busk 10‚ÄĚ long, with 4 loops and pins, equidistantly spaced.¬†Standard flexible busk, with an additional ¬ľ” flat steel bone adjacent to the busk on each side.
Boning 16 bones total in this corset, 8 on each side. On each side, 5 of them are spirals about ¬ľ inch wide – single boned on the seams. One of the bones by the grommets is¬†spiral steel (so the back is a but more flexible than usual when lacing up) but the bones at the center back seam, on the outer edge of the grommets, are flat steel.¬†The bones adjacent to the busk are also flat steel.
Grommets There are 20, two-part size #0 grommets (10 on each side). They have a medium flange and are spaced equidistantly, and finished in black. They’re very nice quality (similar to Prym brand) and have rolled beautifully – definitely an improvement from the smaller silver grommets used in their old stock of corsets!
Laces The laces are black, ¬ľ‚ÄĚ wide nylon cord / shoelace.¬†They are a bit springy / spongey, but they hold bows and knots well and they are definitely long enough.
Price Available in the blue decorative fabric you see here, but also available in a more simple all black design. Sizes 18″ up to 28″ closed waist.
As of 2017, the price is $95 USD. Find it here on Etsy.

 

Final Thoughts:

Ocean Mesh mini underbust corset by Rebel Madness, model unknown. Image courtesy of Awin / Etsy. $95 USD.

This corset goes by several names, like “boho mesh”, “ocean mesh” or “lagoon mesh”. If you search any of those names on Etsy, you will find the listing – or you can find it here.

Because this corset is longer from the waist down than it is from the waist up, it would suit someone with a high waistline / deep pelvis, or it could conceivably be worn as an “active longline” corset (a term coined by Electra Designs, where the bottom¬†edge of the corset covers the hips and lower abdomen, but the top leaves the ribs mostly free for expansion and movement). While I would still not recommend exercising or working out in any corset, this corset does leave my upper ribs more free for deep breathing, as I have a longer torso.

The mesh is a great quality, finely-woven synthetic corsetry mesh. Although we’ve been conditioned to think “natural fibers are superior” when it comes to corset strength fabrics (like cotton coutil) due to their breathability, the truth is that synthetic mesh fabrics tend to be stronger – and because they are a mesh, they are still lightweight and breathable. However, as always, I would recommend wearing this corset with a shirt or liner underneath to prevent chafing and to protect your corset from the sweat and oils from your body.

One concern I had was that the decorative blue fabric seemed a bit transparent (at certain angles, the edge of the spiral bones show through the channels) and I was worried that it would be too thin to keep the bones in place without eventually wearing a hole through the fabric after several months of use. Magda and Maciej (the Rebel Madness team) ensured me this would not happen, as they test all of their designs for at least 6 months before putting them on the market. So far I’ve not seen any damage or wear to this corset (but I have so many corsets that I don’t wear this one daily), so for now my worries are assuaged. However, I’m thinking about adding some decorative flossing on top and bottom of each boning channel in a delicate light blue or deep purple floss, which will add even more security against any future issues.

The prices of Rebel Madness corsets are also extremely reasonable for an entry-level corset (I’ve noticed that corsets made in¬†Poland tend to be lower in price in general), at $95¬†in their Etsy shop.

Do you have this corset, or another corset from Rebel Madness? What do you think of it? Leave a comment down below!

Posted on Leave a comment

Glamorous Corset “Emma” Mesh Underbust Review

This entry is a summary of the review for the “Emma” underbust corset¬†in black mesh, made by Glamorous Corset. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

 

Fit, length Center front is just short of 10.5 inches long, the princess seam is 10 inches, the side seam is also 10 inches and the center back is 11.5 inches long.
Rib spring is 6″,¬†hip spring is 6″. The waist does tend to run a bit large / expand in mesh corsets. Offers a gentle (modern slim) silhouette.
Material The mesh parts are single layer hexagonal-hole “fishnet” style netting (seemingly industry standard for OTR). The front and back panels, boning channels and binding are all black cotton bull denim (a coarse weave twill).
Construction 5-panel pattern (10 panels total). Mesh panels were assembled together, and seams were sandwiched by boning channels on the outside and inside. The channels straddle the seams and reinforce the seams.
Waist tape One-inch-wide waist tape made from single-faced satin ribbon, stitched on the inside of the corset and secured at boning channels. Full width (extends from center front panel to center back).
Binding Matching black cotton twill, machine stitched on both sides. The front was stitched in the ditch and the back has a top stitch. 4 garter tabs (2 on each side).
Modesty panel 5.5 inches wide, unstiffened, made from 2 layers of black cotton twill. Attached to one side of the corset with a line of stitching (easily removed if desired). In the front, there is a¬†¬ľ inch wide modesty placket, also finished in black cotton.
Busk 9‚ÄĚ long, with 5 loops and pins, equidistantly spaced. Heavy duty¬†busk (1″ wide on each side) with an additional ¬ľ” spiral¬†steel bone adjacent to the busk on each side.
Boning 22 bones total in this corset, 11 on each side. Double boned on the seams with ¬ľ inch wide spirals. The bones adjacent to the busk are also spiral steel.¬†The bones sandwiching the grommets are flat steel (probably stainless steel).
Grommets There are 24, two-part size #00 grommets (12 on each side). They have a small / medium¬†flange and are spaced equidistantly, and finished in silver. Only a few¬†splits on the underside of the grommets, and¬†due to the choice in laces, they don’t catch much.
Laces The laces are black, ¬ľ‚ÄĚ wide flat nylon shoelace.¬†They are a bit springy, but they hold bows and knots well and they are long enough.
Price Available in sizes 18″ up to 40″ closed waist.
Comes in black mesh, white mesh, and 4 shades of satin.
Sizes 18″ – 28″ are $79 USD, and sizes 30″ – 40″ are $84 USD.
Only available on the Glamorous Corset website here.

 

Final Thoughts:

Emma Mesh underbust (available in black mesh and white mesh), model unknown. $79-$84 USD. Click through to visit Glamorous Corset.

The¬†Emma corset is a mid-length mesh corset that offers gentle waist reduction. If you have a seated torso length that is less than 10 inches, you may be more comfortable in their shorter “Bella” mesh cincher, and if you prefer a curvier, longer corset, their “Jolie” longline may suit your preferences.

The mesh is the OTR standard “fishnet” type cotton netting, which offers breathability and quite a lot of flexibility, while the sturdy double boning adds body and rigidity to the corset for posture support and vertical tension. Do keep in mind that because the mesh can expand, this mesh corsets (like other mesh corsets) can expand 1-2 inches when worn (I find this is true of nearly all OTR corsets with this kind of fishnet material, regardless of the brand), so if you’re looking for a specific waist reduction, you may need to go one size down from your usual size – but ensure that your ribs and hips will fit that smaller size as well.

One viewer on Youtube asked about the similarities and differences between this Emma corset compared to True Corset’s mesh cincher, which I reviewed a few years back. For the similarities, both corsets have¬†the same number of panels, and the top and bottom edges are cut straight across in a similar way, and the type of mesh / fabrics used are comparable, but that’s where the similarities end. The measurements are different (in the True Corset, the rib spring is +5 inches, and the hip spring is +8 inches. In this Emma, the rib spring and hip spring are both +6 inches). The Emma¬†also has a slightly different construction technique (double boned, and the boning channels seem to be reinforced as well) – and because of the heavier boning, it lends a smoother, more mild silhouette than the True Corset. If I recall correctly, True Corset dipped or sealed their steels in a kind of shrink tubing, whereas in the Emma corset, they used cotton channels on inside and outside.

Find the Glamorous Corset Emma¬†and other mesh corsets in Glamorous Corset’s shop here.

Do you have the Emma corset, or another piece from Glamorous Corset? Let us know what you think of it in a comment below.

Posted on Leave a comment

Orchard Corset CS-511 Mesh Overbust Review

This entry is a summary of the review video “CS-511 Mesh Overbust Review”. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

Fit, length Center front is 15.5 inches long, princess seam is 16.5 inches long (10 inches above the waist, 6.5 inches below the waist), the side seam is 14 inches, and the center back is 13 inches long.
Full bust spring is 11″, and lower hip spring is 14″.
The silhouette is hourglass, but the flexible mesh allows for more contouring around curves = giving more of a rounded ribcage, and hips of the corset can contour around your own hips, whether your hips are slanted or shelf-like.
Material Single layer of fishnet style black mesh, and the boning channels / are made with an outside layer of black cotton twill and internal layer of polyester grosgrain ribbon.
Pattern & Construction 6-panel pattern (12 panels total). Panels 1-2 give space for the bust, panels 3-4 curve over the hip. Construction: Panels were assembled and then boning channels sandwiched the seams (on outside and inside), covering and reinforcing the seams.
Waist tape One-inch-wide waist tape made from grosgrain ribbon, sandwiched between the boning channels. Full width (center front to center back).
Binding Made from matching black cotton twill. Machine stitched on both sides, stitched in the ditch (between the corset and the binding) in front, and a necessary top stitch on the underside. 6 garter tabs (3 on each side).
Modesty panel 5‚ÄĚ wide and unstiffened, made from 2 layers of cotton twill, and attached to one side of the corset with a line of stitching – this is easily removed, and you can also remove the tags in the back by removing that seam with the modesty panel, in case you find that the tags show through the mesh.
There’s¬†no front modesty placket in this corset.
Busk 14‚ÄĚ long, with 6 loops and pins (last two are a bit closer together). Standard width busk (half an inch wide on each side), but Orchard’s busks tend to be¬†more rigid (less bendy) than other busks of the same width.
Boning 14 bones total in this corset. On each side, 7 of them are spirals about ¬ľ‚ÄĚ inch wide, in single channels, equidistantly spaced. Then there are two flat steel bones, both ¬ľ‚ÄĚ wide, sandwiching the grommets.
Grommets There are 24, two-part size #00 grommets (12 on each side). They have a small-medium flange and are finished in silver. They‚Äôre spaced equidistantly about 1‚ÄĚ apart.
Laces The laces are ¬ľ‚ÄĚ wide flat nylon shoe-lace style. I find them to be long enough, a little springy but it “stretches out” and the springiness dissipates over time. Orchard also sells double-face satin ribbon if you prefer.
Price Available in waist sizes 18″ to 40″, in black and in white¬†mesh.
Sizes 18-32 are $79 USD, and sizes 34-40 are $82 USD, but you can save 10% by using the coupon code CORSETLUCY

 

Brittney from Orchard Corset (the very same I consulted with on sizing) models the mesh CS-511 overbust. Click through to see their selection.

Final Thoughts:

Full disclosure, this corset was sent to me as a sample. I normally take a size 24″ in OTR corsets, but as I’ve been shrinking rapidly this year I requested the size 22″. Brittney from Orchard Corset suggested I go a size down, to 20″ because the mesh has a tendency to expand over time. The thought of wearing a size 20″ in an OTR overbust was a bit mind-boggling, but I hesitantly agreed.

The very first time I put on this corset, I thought it would never fit – but as I wore it in more over the weeks, I did indeed notice that it stretched out, to the point that I can wear it with their recommended 2 inch gap in the back. The hips of this corset are quite large (seemingly much larger or has a higher tendency to stretch compared to the bustline) so I would be more comfortable wearing this corset with a “V” shaped lacing gap, which seems to be par for me with OTR overbusts.

However, this is by far the most affordable mesh overbust currently available on the market, starting at $79. The other mesh overbusts include What Katie Did ($375 USD), and Dark Garden ($895 USD) can be out of many clients’ budget. I can see the mesh CS-511 being used by those who would like some breezy bust support in the heat of the summer, or wearing this corset under strapless dresses (there is a white mesh version as well for summer brides). Because my mesh corset has a few construction imperfections¬†(it’s asymmetric over the hip), I’d be more likely to wear this corset under my clothing as opposed to overtop anyway.

CORRECTION FROM THE VIDEO: Orchard Corset’s mesh underbust corsets usually have¬†bones are evenly distributed around the waist – and the bigger the corset size, the more bones are included – this is still true. However, it seems that this isn’t the case for the mesh overbust corsets (at least, not from what I’ve seen in pictures). It appears that all sizes have the same number of bones, same as with their all-cotton or satin corsets.

Shop for the CS-511¬†mesh overbust¬†corset from Orchard Corset here, and remember you can save 10% by using the code CORSETLUCY (I don’t get any kickback from this, it’s strictly a coupon/ discount code for you).

Posted on 5 Comments

Knix / Knixwear 8-in-1 Evolution Bra Review

As you know, I’ve been on the lookout these last few years for a good wireless bra that is compatible with most of my corsets.

I’ve reviewed the Enell Sports and Lite bras in the past, as well as the Genie Bra¬†and the Underworks Binder, trying to find the perfect bra that is comfortable to wear with my corset.

I define the “perfect bra” as:

  • it has no underwire (so there is no metal for the corset to shove into my chest, as well as no wire to pop forward over the top edge of my corset)
  • the band is wide enough that it doesn’t cause a thin roll of flesh pinched under the band and the top of the corset
  • it doesn’t cause¬†“muffin” or flesh spillover in the back
  • it’s comfortable enough to wear all day, and doesn’t leave marks or scars on my skin
  • it still gives moderate support and a¬†relatively flattering shape in the cup (which my Genie bra didn’t really do)
  • Bonus points if the bra is also low-cut enough to wear with my scoop-neck shirt (which is the one thing my Enell Lite didn’t do).

Knixwear is a Canadian company that started by making menstrual underwear, and they launched a Kickstarter for the Evolution bra in September 2015 to revolutionize the modern bra. They well surpassed their original goal; in fact I was one of 13,642 backers to help crowdfund over a million dollars on their project. I received my bra this summer and tried it out for a couple of weeks.

The Knix says it’s 8-in-1 because it’s reversible so you can have two different colors (I chose the black and beige), and comes with black and beige convertible straps which can be worn traditionally, criss-cross (racer) back, or even halter if you wish (although I wouldn’t recommend strapless).

My true bra size is 30F, but I normally sister-size to 32DD because it’s easier to find in my local shops. The way that¬†Knix sizes their bras is by the “+2 inch” system, which puts me at an¬†approximate 32C (size 2 in the Evolution bra). As my underbust (bra band) measurement is naturally 29 inches, I anticipated the band to feel loose on me while giving a bit of “quad boob” in the front, and I was right. So if you have a full bust and small band like I have, you will likely have to heavily sister size as well.

However, when I wear a corset, my body tends to “squish up” and my natural 29″ ribcage becomes closer to 30-31 inches in a corset – so the loose band of the bra fits me better in a corset than without.

Support-wise, it’s equivalent to a light support sports bra (for low-impact activities – I would not do contact sports in this bra). It gives slightly more support than the Genie bra I reviewed previously, and it’s comfortable and moisture-wicking in the heat of the summer.

One feature I like about it is the bonded seams instead of sewn, so it lies flat against my body and doesn’t cause welts or marks on my body. (Because I have a darker complexion, I also get hyperpigmentation scarring on my skin – this bra doesn’t leave marks on my body, even after wearing it for hours.

Knixwear says that their bra band doesn’t roll up, and I’ve found this to be mostly true. The one thing I would love is for the band to be a little longer, even by an inch or so.

I got the padded version, not because I want extra fullness in my cup but rather for coverage and smoothness, and it does its job. Regarding the shape of the cup – it’s not a shape I personally find the most aesthetically pleasing, but I may be biased towards my underwire, molded-up balconette bras that I wear almost daily. But I like how the Evolution bra looks under fitted t-shirts, especially graphic tees where I don’t want to stretch out the design in front.

The scoop neck design also prevents the bra from peeking out under my scoop-neck shirts. I’d be interested in trying one of their V-neck bra designs to see if it gives less “boobling over” in the front.

If you’d like to try their Evolution bra for yourself and support my reviews at the same time,¬†click here! (referral link)

Posted on Leave a comment

Pearls & Arsenic Red Swarovski Corset Review

This entry is a summary of the review video “REVIEW: Pearls & Arsenic Red Swarovski Corset” which you can watch on YouTube here:

 

Fit, length Center front is 11.25 inches long, princess seam is 9 inches (3.5″ above the waist, 5.5″ below the waist), side seam is 8 inches and center back is 12 inches.
Underbust 26″, waist 22″, low hip 33″.
Conical ribcage. Comes down low over the tummy, and sweeps up high on the back. This type of corset would fit someone with a high waist.
Material 2 main layers; fashion layer is red¬†satin, with many “garnet” (dark red) and “ruby” (light red) colored tiny Swarovski crystals. The strength fabric (lining) is black cotton coutil.
Construction 6 panel pattern (12 panels total). Panel 3 gives space over the hip, and panels 5-6 give plenty of space in the back. For construction: both layers were flatlined and treated as one. Panels were assembled and topstitched (seam allowances on the inside), and internal boning channels (cotton twill) were laid down to cover the seam allowance.
Waist tape 1.25″ wide waist tape, made from single-faced satin ribbon, exposed on the inside of the corset and secured down at boning channels.¬†Partial width (from seam between panels 1-2 to seam between panels 5-6).
Binding Bias tape made from matching red satin, neatly machine stitched on both inside and outside with a small topstitch (may have been stitched in one pass, using a special attachment). There are also 4 garter tabs (2 on each side).
Modesty panel 7.5 inches wide and finished in red satin fashion fabric / black cotton lining. Unstiffened, but quilted with many lines of stitching. Attached to one side of the corset with a line of stitching (easily removed if desired), and finished with binding on top and bottom. In the front there’s a¬†slightly stiffened placket, 1 inch wide, finished in red¬†satin, extending out from the¬†knob side of the busk.
Busk 10″ long, with 5 loops and pins, equidistantly spaced. Slightly wider (3/4″ on each side) and slightly stiffer than a standard flexible busk.
Boning 14 steel bones not including busk. On each side, 5 spirals (1/4″ wide) are single boned on the seams, and 2 flats (1/4″ wide) sandwiching the grommets.
Grommets 24 grommets total (12 on each side), size #00 two-part grommets with small-to-moderate flange; set a bit closer together at the waistline, no wear/fraying/pulling out of grommets. I see no splits in the back, and the back panel is very good at not bowing or warping (see Final Thoughts).
Laces Strong 1/4″ black¬†nylon¬†flat¬†shoe-lace style laces; they have a bit of string, they hold bows and knots well, they glide well through the grommets, and they are long enough. (I would love to switch out the laces for some lush double-face satin ribbon to match the rest of the corset!)
Price Although the corset in this review is a sample, Pearls & Arsenic corsets start at $193 USD.

 

Designer Raven Tao (center, in white) poses with her Pearls & Arsenic team Vera Lui (left) and Natasha Noir (right).

Final Thoughts:

Pearls & Arsenic is described as Hong Kong’s first luxury brand, owned by Raven Tao (who has her own Youtube channel, as well as a channel specifically about corsets!).

There are hundreds of small Swarovski crystals encrusting this corset, arranged in a gradient of deep “garnet” red crystals at the top and tapering down to lighter “ruby” red crystals towards the bottom. These were all hand-applied by Raven herself, and you can tell it was done with care – just the right amount of adhesive¬†was used and each crystal was cleanly applied so there were¬†no strings or residue oozing out from under the crystals. There was also care to keep the design symmetric on both sides, and to not have any crystals under the loops of the busk so it could be fastened properly. The crystals are also holding on securely and none of them are falling off.

On the center front and center back of this corset, there is a heavy-duty interfacing / canvas / buckram, or some other stiffener that helps keep the center front smooth (wrinkle-free) and flat, and prevents the back steels or grommets from warping or bowing along the horizontal plane. I seldom see corsets stabilized in this way and I found it interesting.

See more designs by Raven Tao on her Pearls & Arsenic site here, and see the official Pearls & Arsenic Youtube channel here!

Do you own a corset by Pearls & Arsenic? Let us know what you think of it in a comment below!

Posted on Leave a comment

Glamorous Corset “Bella” Mesh Cincher Review

This entry is a summary of the review for the “Bella” cincher in black mesh, made by Glamorous Corset. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

 

Fit, length Center front is just short of 8 inches long, the side seam is 6.5 inches and the center back is 8.25 inches long.
Rib spring is 4″, upper¬†hip spring is 5″. The waist does tend to run a bit large / expand in mesh corsets. Offers a gentle (modern slim) silhouette.
Material The mesh parts are single layer hexagonal-hole “fishnet” style netting (seemingly industry standard for OTR). The front and back panels, boning channels and binding are all black cotton bull denim (a coarse weave twill).
Construction 4-panel pattern (8 panels total). Mesh panels were assembled together, and seams were sandwiched by boning channels on the outside and inside. The channels straddle the seams and reinforce the seams.
Waist tape One-inch-wide waist tape made from single-faced satin ribbon, stitched on the inside of the corset and secured at boning channels. Full width (extends from center front panel to center back).
Binding Matching black cotton twill, machine stitched on both sides. The front was stitched in the ditch and the back has a top stitch. No garter tabs.
Modesty panel 5 inches wide, unstiffened, made from 2 layers of black cotton twill. Attached to one side of the corset with a line of stitching (easily removed if desired). In the front, there is a¬†¬ľ inch wide modesty placket, also finished in black cotton.
Busk 6.5‚ÄĚ long, with 3 loops and pins. Heavy duty¬†busk (1″ wide on each side) with an additional ¬ľ” spiral¬†steel bone adjacent to the busk on each side.
Boning 18 bones total in this corset, 9 on each side. Double boned on the seams with ¬ľ inch wide spirals. The bones adjacent to the busk are also spiral steel.¬†The bones sandwiching the grommets are flat steel (probably stainless steel).
Grommets There are 16, two-part size #00 grommets (8 on each side). They have a small / medium¬†flange and are spaced equidistantly, and finished in silver. Only a few¬†splits on the underside of the grommets, and¬†due to the choice in laces, they don’t catch too much.
Laces The laces are black, ¬ľ‚ÄĚ wide flat nylon shoelace.¬†They are a bit springy, but they hold bows and knots well and they are long enough.
Price Available in sizes 18″ up to 40″ closed waist.
Comes in black mesh, white mesh, 5 colors of satin, and 5 colors of leather.
Sizes 18″ – 30″ are $79 USD, and sizes 32″ – 40″ are $84 USD.
Only available on the Glamorous Corset website here.

 

Final Thoughts:

Bella Mesh cincher, model unknown. $79-$84 USD. Click through to visit Glamorous Corset.

The Bella¬†is quite possibly the shortest¬†mesh cincher¬†I’ve ever tried – so if you have a very short¬†torso and you’re looking for something you can easily sit down in, which can offer lumbar support through your work day without making you overheated, the Bella¬†may be a viable option for you. However, if you have a longer torso, you might experience a bit of “rib squidge” above the corset and below your bra band like I experienced. For people like us, there are longer mesh corsets available (like the gentle silhouette “Emma” underbust, or the curvy longline “Jolie” corset).

The mesh is the OTR standard “fishnet” type cotton netting, which offers breathability and quite a lot of flexibility, while the sturdy double boning adds body and rigidity to the corset for posture support and vertical tension. Do keep in mind that because the mesh can expand, this mesh corsets (like other mesh corsets) can expand 1-2 inches when worn (I find this is true of nearly all OTR corsets with this kind of fishnet material, regardless of the brand), so if you’re looking for a specific waist reduction, you may need to go one size down from your usual size – but ensure that your ribs and hips will fit that smaller size as well.

Find the Glamorous Corset Bella and other mesh corsets in their shop here.

Do you have the Bella corset, or another corset from Glamorous Corset? Let us know what you think of it in a comment below.

Posted on 1 Comment

C&S Constructions Double Corset Review

This entry is a summary of the review video “Rainbow Holow Corset! Two C&S Constructions Corsets (Review / Study)” which you can watch on YouTube here:

Rainbow Holo Corset

Fit, length Center front is 10.5 inches long, princess seam is 9,5 inches, side seam is 9.5 inches and center back is 11.5 inches.
Underbust 29″, waist 21″, high hip 34″.
Rounded ribcage and rounded hips. The busk is flexible and allows inward bowing.
Material 2 main layers: fashion layer is holographic silver foil (almost like interwoven tinsel). Lined in herringbone coutil.
Construction 4 panel pattern! (Surprising as it’s so curvy.)¬†Layers were flatlined, panels were assembled and reinforced with sturdy topstitch (seam allowances facing outside). External boning channels laid down over the seams.
Waist tape 1-inch-wide waist tape “invisibly” installed between the layers, full width.
Binding Bias strips of matching holographic foil material, machine stitched on both inside and outside (zigzag stitch; the foil material likes to shred/fray).
Modesty panel None (this is a sample). However on the C&S website, they say that all corset commissions come with a back modesty panel.
This corset sample does have a wide boned underbusk, covered in black herringbone coutil.
Busk 9″ long, with 5 loops and pins, equidistantly spaced. Standard flexible busk (1/2″ wide on each side). The boned underbusk gives a bit more stiffness, but the corset still “dishes” on my body (this may be deliberate – common of C&S corsets, and this also seems to help me achieve a higher comfortable waist reduction in this corset).
Boning 11 steel bones, not including busk. 5 on each side, plus boned underbusk in front. On each side, 3 spirals single¬†boned on the seams, and 2 flats (1/4″ wide) sandwiching the grommets.
Grommets 30 grommets total, size #00 two-part grommets with small flange; spaced a little closer together at the waistline for easier lacing up. Underneath the grommets there are wider washers that act as a wider flange – they may help protect them from pulling out, they give more thickness for the grommet to “bite down” on (preventing wiggling or looseness, and they also hide any fraying or splitting of the outer holographic material. There are no splits in these.¬†No wear/fraying/pulling out of grommets.
Laces 3mm wide satin rattail cord. They have zero stretch, they glide well through the grommets (slippery), and they are long enough.

 

Purple with Lace Longline Corset

Fit, length Center front is 12.4 inches long, princess seam is 11 inches, side seam is 11.5 inches and center back is 13 inches.
Circumferential measurements: Underbust 28″, waist 20″, high hip 35″.
Conical ribcage. Slight hip shelf, and longline corset. Also bows at the front (likely a deliberate effect to get more of a waist reduction).
Material 3 main layers: fashion fabric is Cadbury purple satin (may be a satin coutil, or fused to a strength fabric), overlaid with black lace. Lined in black cotton drill.
Construction 4 panel pattern! (Surprising as it’s so curvy.)¬†Layers were flatlined, panels were assembled and reinforced with sturdy topstitch (seam allowances facing outside). Black external boning channels laid down over the seams, plus extra bones in the middle of the panels (sandwiched between the layers).
Waist tape 1-inch-wide waist tape “invisibly” installed between the layers, full width.
Binding Black satin ribbon (the same ribbon used for external boning channels), matchine stitched on both sides using a zigzag stitch.
Modesty panel None (this is a sample). However on the C&S website, they say that all corset commissions come with a back modesty panel.
This corset sample does have a wide boned underbusk, covered in black satin coutil.
Busk 11″ long, with 5 loops and pins, equidistantly spaced. Standard flexible busk (1/2″ wide on each side).¬†The boned underbusk gives a bit more stiffness, but the corset still “dishes” on my body (this may be deliberate – common of C&S corsets, and this also seems to help me achieve a higher comfortable waist reduction in this corset).
Boning 17 steel bones, not including busk. 8 on each side, plus boned underbusk in front. On each side, 3 spirals single¬†boned on the seams, and an additional 3 bones in the middle of the panels. Also on each side there are 2 flats (1/4″ wide) sandwiching the grommets.
Grommets 34 grommets total, size #x00 two-part eyelets with tiny flange; set closer at the waistline to make lacing up easier. On the underside, the eyelets were perforated (petals splayed out) but they don’t catch on the laces. There are still very large washers on the underside to prevent the eyelets from pulling out.
Laces 1/8″ wide flat black cotton shoelace.¬†They have zero stretch or springiness, they glide well through the grommets, they hold knots and bows securely, and they are long enough.

 

C&S Model Karen models the same holographic corset – see this and other pictures on C&S Constructions website, in Gallery 1!

Final Thoughts:

Both of these corsets were made for one of C&S Constructions’ previous models, who had a slightly smaller ribcage and slightly fuller hips than me – so these weren’t made to measure for my body, but we’re “close enough” to be able to fit the same corsets similarly.

I adore the holo corset especially, and it’s a very thin and lightweight corset. Even though both corsets are a smaller waist than I’m accustomed to wearing these days (I prefer to stay at 22 inches, but the holo corset is 21″ and the purple corset is 20″), I’m able to achieve slightly more of a waist reduction in both of these because of the comfortable patterning, and also likely because of the slight “dishing” or bowing in the center front busk.

In both corsets, the construction is a bit more “rugged” than I’m accustomed to seeing these days. The overlocking / zigzag stitching is visible (especially on the inside of the corset). I thought this might have just been because these were sample corsets for photoshoots, but from other C&S customers I’ve spoken with, it seems that this was just the way many corsets were constructed in the 90s and early 2000s. While they’re just not as “tidy” in their finish compared to most corsets on the market today, these corsets have held up well over the years and give a beautiful silhouette, and are a reflection of C&S’s good reputation. Visit C&S Constructions website here.

Do you own this corset or another piece from C&S Constructions? Let us know what you think of it in a comment below!