Posted on

Orchard Corset CS-511 Mesh Overbust Review

Last updated on August 13th, 2018 at 02:55 pm

This entry is a summary of the review video “CS-511 Mesh Overbust Review”. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

Fit, length Center front is 15.5 inches long, princess seam is 16.5 inches long (10 inches above the waist, 6.5 inches below the waist), the side seam is 14 inches, and the center back is 13 inches long.
Full bust spring is 11″, and lower hip spring is 14″.
The silhouette is hourglass, but the flexible mesh allows for more contouring around curves = giving more of a rounded ribcage, and hips of the corset can contour around your own hips, whether your hips are slanted or shelf-like.
Material Single layer of fishnet style black mesh, and the boning channels / are made with an outside layer of black cotton twill and internal layer of polyester grosgrain ribbon.
Pattern & Construction 6-panel pattern (12 panels total). Panels 1-2 give space for the bust, panels 3-4 curve over the hip. Construction: Panels were assembled and then boning channels sandwiched the seams (on outside and inside), covering and reinforcing the seams.
Waist tape One-inch-wide waist tape made from grosgrain ribbon, sandwiched between the boning channels. Full width (center front to center back).
Binding Made from matching black cotton twill. Machine stitched on both sides, stitched in the ditch (between the corset and the binding) in front, and a necessary top stitch on the underside. 6 garter tabs (3 on each side).
Modesty panel 5” wide and unstiffened, made from 2 layers of cotton twill, and attached to one side of the corset with a line of stitching – this is easily removed, and you can also remove the tags in the back by removing that seam with the modesty panel, in case you find that the tags show through the mesh.
There’s no front modesty placket in this corset.
Busk 14” long, with 6 loops and pins (last two are a bit closer together). Standard width busk (half an inch wide on each side), but Orchard’s busks tend to be more rigid (less bendy) than other busks of the same width.
Boning 14 bones total in this corset. On each side, 7 of them are spirals about ¼” inch wide, in single channels, equidistantly spaced. Then there are two flat steel bones, both ¼” wide, sandwiching the grommets.
Grommets There are 24, two-part size #00 grommets (12 on each side). They have a small-medium flange and are finished in silver. They’re spaced equidistantly about 1” apart.
Laces The laces are ¼” wide flat nylon shoe-lace style. I find them to be long enough, a little springy but it “stretches out” and the springiness dissipates over time. Orchard also sells double-face satin ribbon if you prefer.
Price Available in waist sizes 18″ to 40″, in black and in white mesh.
Sizes 18-32 are $79 USD, and sizes 34-40 are $82 USD, but you can save 10% by using the coupon code CORSETLUCY


Brittney from Orchard Corset (the very same I consulted with on sizing) models the mesh CS-511 overbust. Click through to see their selection.

Final Thoughts:

Full disclosure, this corset was sent to me as a sample. I normally take a size 24″ in OTR corsets, but as I’ve been shrinking rapidly this year I requested the size 22″. Brittney from Orchard Corset suggested I go a size down, to 20″ because the mesh has a tendency to expand over time. The thought of wearing a size 20″ in an OTR overbust was a bit mind-boggling, but I hesitantly agreed.

The very first time I put on this corset, I thought it would never fit – but as I wore it in more over the weeks, I did indeed notice that it stretched out, to the point that I can wear it with their recommended 2 inch gap in the back. The hips of this corset are quite large (seemingly much larger or has a higher tendency to stretch compared to the bustline) so I would be more comfortable wearing this corset with a “V” shaped lacing gap, which seems to be par for me with OTR overbusts.

However, this is by far the most affordable mesh overbust currently available on the market, starting at $79. The other mesh overbusts include What Katie Did ($375 USD), and Dark Garden ($895 USD) can be out of many clients’ budget. I can see the mesh CS-511 being used by those who would like some breezy bust support in the heat of the summer, or wearing this corset under strapless dresses (there is a white mesh version as well for summer brides). Because my mesh corset has a few construction imperfections (it’s asymmetric over the hip), I’d be more likely to wear this corset under my clothing as opposed to overtop anyway.

CORRECTION FROM THE VIDEO: Orchard Corset’s mesh underbust corsets usually have bones are evenly distributed around the waist – and the bigger the corset size, the more bones are included – this is still true. However, it seems that this isn’t the case for the mesh overbust corsets (at least, not from what I’ve seen in pictures). It appears that all sizes have the same number of bones, same as with their all-cotton or satin corsets.

Shop for the CS-511 mesh overbust corset from Orchard Corset here, and remember you can save 10% by using the code CORSETLUCY (I don’t get any kickback from this, it’s strictly a coupon/ discount code for you).