Unartig Boutique “Red Poppies” Corset Review
This entry is a summary of the video “Unartig Boutique “Red Poppies” Corset Review” which you can watch on YouTube here:
|Fit, length||The measurements of one of Unartig’s standard sized corsets would be: Waist 24″, Underbust 30″, Low hip 37″. (But the corset was made slimmer through the hips to fit my body).|
|Material||The fashion fabric is a fine-weave black cotton canvas, and the lining is black German spot broche.|
|Construction||8 panel pattern (16 panels total), constructed using the welt-seam method. 4 panels make the front of the corset, and 4 panels makes the back on each side.|
|Binding||Made from bias strips of matching black fine-weave canvas. Machine stitched on the outside, and hand finished on the inside.|
|Waist tape||1 inch wide invisible waist tape, sandwiched between the panels. Extends from the seam between panels 1-2, back to the seam between panels 7-8.|
|Modesty panel||No back modesty panel (but you may be able to request one in a custom order). The modesty placket in front is half inch wide, unstiffened, and finished in black canvas.|
|Busk||10.75 inches long. 5 loops + pins, equidistantly spaced. It is a standard flexible busk, and black busks seem to have more flexibility in general compared to other busks – but Lotta reinforced it with 1/2″ flat steels on either side of the busk.|
|Boning||22 bones total, not including busk. Single boned on the seams, using 1/2″ wide spiral bones. Flat steels are placed in the back by the grommets and also adjacent to the busk.|
|Grommets||26 two-part grommets, size 5mm Prym brand (very popular amongst European corsetieres), with a medium flange. Finished in black to match the rest of the corset, and set a bit closer together at the waistline. Big washers in the back; all grommets rolled nicely.|
|Laces||Double face satin ribbon in black, 3/8″ wide. It’s long enough, very strong, has no spring, glides through the grommets well. Ribbon hides well under clothing as it’s not thick.|
|Price||This particular style is €400 (Euros), which converts to about $420 USD.|
Although at first glance this corset may look relatively simple as a (mostly) black underbust, it is actually a “first” in my collection in several ways. The gorgeous poppy motif was embroidered on each panel and then carefully matched at each panel (the poppy theme was chosen by Lotte, as I gave her creative license in designing this piece). Subtle, elegant piping also accents some of the seams.
It is also my first corset made with a strength fabric of German spot broche, which I’ve come to learn is very strong. The corset is very posture-corrective and has an extremely strong, flat front for those who prefer slightly more rigid corsets. Having an 8-panel pattern (16 panels total) it is highly customizable to fit around most any curve.
The corset also has a unique and flattering cut to the upper edge: along the front of the corset, it closely follows a similar path as the underwire of my bra, which may support and push forward the breasts – but at the side seam, the top binding sweeps back down again to allow space under my arms for full range of motion and not dig into my armpits.
While Lotte can make this corset in a standard size or completely custom, I believe in this situation my measurements were close enough that it was “semi-custom” to fit me. The center front is 11 inches long, and the princess seam is 10 inches long. 6 of those inches is from the waist to the underbust, while 4 inches were from waist to the lap bottom, so it would fit my long torso/low waist comfortably.
To learn more about Lotte and her Unartig boutique, visit her website here.