RetroFolie Alyssum Underbust Corset Review

This post is a summary of the “RetroFolie Alyssum Underbust Corset Review” video, which you can watch on Youtube if you prefer:


Fit, length Center front is 11 inches long, along the princess seam (underbust to lap) is 9.5 inches, and the enter back is also 12.5 inches. The corset is cut low in the center front to control lower tummy, and then the corset gradually cuts upwards in the back to give a high back at the top, and stops just above the tailbone on me. The Alyssum corset is not longline (stops around the iliac crest). Circumferential measurements: waist is 22″, underbust 30″, high hip 32″ (this is her standard-sized option). The silhouette is a gentle hourglass.
Material 3 main layers – fashion fabric is printed cotton sateen (interfaced twice), featuring “L’escarpolette” (The Swing) by Jean-Honoré Fragonard.  There is a twill interlining between the fashion fabric (note that Julianne has started using herringbone coutil as the strength fabric in her corsets now). The floating liner is black cotton as well.
Construction 6 panel pattern, with some of the panels in the front tapering toward the lower tummy. Fashion layer (interfaced) and cotton interlining were flatlined (lining is floating). Panels assembled with a top-stitch at the seams (quadruple stitched). I requested double boning on the seams; channels are sandwiched between fashion and interlining layers.
Binding Commercial black bias binding, machine stitched on both sides, with a slight topstitch visible.
Waist tape 1-inch wide waist tape, invisibly stitched between the layers. It starts at the seam between panels 1-2, and ends at the seam of the last panel (between panels 5-6).
Modesty panel Modesty panel is around 6.5″ wide, finished in the same fashion fabric (featuring the shoe flying off the lady’s foot) and black cotton lining. Stiffened with what I presume is buckram (the same stiffener found in hats, Julianne says) and suspended on the laces with grommets near the top and bottom. There is also a 1″ wide modesty placket extending from the knob side of the busk.
Busk 10 inches long with 5 pins, equidistantly spaced. Standard flexible busk (half inch on each side). There is also a 1/4″ wide flat steel on either side of the busk for reinforcement.
Boning 28 total bones not including busk (remember I requested double bones in my corset). On each side there are eleven 1/4″ spiral steel bones. Two further 1/4″ wide flats sandwich the grommets on each side, as well as one 1/4″ flat steel by the busk, making a total of 14 bones on each side.
Grommets 26 grommets total, size #00 with medium flange, finished in silver and set equidistantly. A few splits on the underside, but for the most part they’ve rolled nicely. Washers are large to prevent the grommets from falling out.
Laces 1/4″ black flat braided shoe-lace style laces. Virtually unbreakable. Has a bit of spring. There is quite a bit of friction while lacing up, but this might be due to the modesty panel more than anything else.
Price At the time that I’m writing this review, a historical artwork Alyssum underbust starts at $270 – $290 USD through her Etsy store. Several upgrades are available such as a modesty panel (extra $20), and custom fit (extra $25).

Other Thoughts/ Observations:

From her Facebook fanpage: L’Escarpolette corset is RetroFolie’s best seller


RetroFolie is the business name of Julianne Coriandoli, who was also the 2014 Grand Prize winner of the Foundations Revealed “geometric” theme corset contest. Today she is more known for her incredible “Historical Artwork” corsets, in which she takes beautiful historical paintings and turns them into 3-dimensional pieces of wearable art.

Many people initially thought that the corsets were put into a printer after completing construction – in fact, the paintings are printed onto flat fabric (cotton sateen) and each panel is carefully cut out and stitched to match the others by the millimetre – the picture spans beautifully unbroken over the front of the corset, and I know from personal experience how much time and care is necessary for such a project.

Julianne says that she’s happy to take custom requests for paintings, as long as they are within the public domain (the artist has been deceased for 70-100 years, depending on the country and laws).

When I ordered this corset this past spring, default RetroFolie corsets had a cotton twill interlining and single boning. Today, it seems that all of her corsets now feature double boning and a herringbone coutil strength interlining, so you no longer have to order those as markups!

In the near future I will also be reviewing RetroFolie’s longline Azalea corset, which was also made-to-measure.

You can see what other corsets Julianne has for sale in the RetroFolie Etsy shop HERE, or check out her main website HERE.

Leave a comment

Leave a Reply

Your email address will not be published. Required fields are marked *

3 comments on “RetroFolie Alyssum Underbust Corset Review

  1. How beautiful. Would you reckon the Azalea would give a more dramatic curve? After a Josephine and a Puimond PY09, I’d still like something curvy.

    • bishonenrancher on said:

      Hi Cara, I believe the Alyssum and Azalea corsets have the same curviness, it’s just that the Azalea is longline, so the lower hip is 2″ larger but the upper hip is the same as the Alyssum. If you’re looking for something more dramatic, it would be worth it to order the corset custom fit and have Julianne make the corset with the reduction you want.

%d bloggers like this: