Glamorous Corset “Jolie” Mesh Longline Review

This entry is a summary of the review for the “Jolie” longline corset in black mesh, made by Glamorous Corset. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:


Fit, length Center front is just short of 14 inches long, princess seam is 10 inches (5.5 inches from the waist up, 4.5 inches from the waist down), the side seam is 12.5 inches and the center back is 14 inches long.
Rib spring is 8″, lower hip spring is 12″. Ribs are gently rounded due to the flexibility and expansion of the mesh. Longline corset, coming low over the abdomen and hips.
Material The mesh parts are single layer hexagonal-hole “fishnet” style netting (seemingly industry standard for OTR). The front and back panels, boning channels and binding are all black cotton bull denim (a coarse weave twill).
Construction 6-panel pattern (12 panels total). Panels 1-2 converge and taper towards the lower tummy. Panels 3-4 provide space over the hips. Panels were assembled together, and seams were sandwiched by boning channels on the outside and inside.
Waist tape One-inch-wide waist tape made from single-faced satin ribbon, stitched on the inside of the corset and secured at boning channels. Full width (extends from center front panel to center back).
Binding Matching black bull denim, machine stitched on both sides. The front was stitched in the ditch and the back has a top stitch. Also 6 garter tabs (3 on each side).
Modesty panel 5.5 inches wide, unstiffened, made from 2 layers of black cotton bull denim. Attached to one side of the corset with a line of stitching (easily removed if desired). In the front, there is a ¼ inch wide modesty placket, also finished in black cotton.
Busk 11.5” long, with 5 loops and pins, the lower two a bit closer together. Standard flexible busk, with an additional ¼” spiral steel bone adjacent to the busk on each side.
Boning 26 bones total in this corset, 13 on each side. Double boned on the seams with ¼ inch wide spirals. The bones adjacent to the busk are also spiral steel. The bones sandwiching the grommets are flat steel (probably stainless steel).
Grommets There are 28, two-part size #00 grommets (14 on each side). They have a small / medium flange and are spaced equidistantly, and finished in silver. The washers are larger than the top-hat side (which is a perk). Many splits on the underside of the grommets, but due to the choice in laces, they don’t catch too much.
Laces The laces are black, ¼” wide flat nylon shoelace. They are a bit springy / spongey, but they hold bows and knots well and they are long enough.
Price Available in sizes 18″ up to 40″ closed waist.
Sizes 18″ – 30″ are $79 USD, and sizes 32″ – 40″ are $84 USD.
Only available on the Glamorous Corset website here (this ref link will give you 15% off your first purchase).


Final Thoughts:

Jolie Mesh longline underbust corset, model unknown. $79-$84 USD. Click through to visit Glamorous Corset.

The Jolie corset is my first review of seven different mesh corset reviews I did in 2017, showing that mesh corsets are now a huge part of the OTR corset market and they’re definitely here to stay!

The Jolie is quite possibly the longest mesh underbust I’ve ever tried – many of the Orchard Corset mesh pieces are shorter from the waist down and stop slightly higher on my hip, while many of Mystic City’s corsets are shorter from the waist up and stop short of my underbust. If you have a very long torso and need more coverage and support both above and below the waist, the Jolie may be a viable option for you. However, if you have a seated torso length of less than 10 inches, you might feel more comfortable in a shorter mesh corset instead.

The mesh is the OTR standard “fishnet” type cotton netting, which offers breathability and quite a lot of flexibility, while the sturdy double boning adds body and rigidity to the corset for posture support and vertical tension. Do keep in mind that because the mesh can expand, this mesh corsets (like other mesh corsets) can expand 1-2 inches when worn (I find this is true of nearly all OTR corsets with this kind of fishnet material, regardless of the brand), so if you’re looking for a specific waist reduction, you may need to go one size down from your usual size.

Find the Glamorous Corset Jolie and other mesh corsets in their shop here (using this referral link will get you 15% off your first purchase).


Leave a comment

Leave a Reply

Your email address will not be published. Required fields are marked *

%d bloggers like this: