Posted on Leave a comment

Burleska Steel Boned Longline Corset Review

This post is a summary of the “‘Burleska Steel Boned Longline Corset Review” video, which you can watch on Youtube:

Fit, length Center front is 13 inches long, the side seam is 9.5 inches long. (Your torso should be about 10.5 inches long from underbust to lap). Center back is 12.5 inches long. Circumferential measurements: waist is size 24 (24 inches), the underbust is 30 inches (6 inch rib spring), and the low hip is about 35-36 inches (11-12 inch hip spring at the lap level).
Material Two main layers: fashion fabric is brown polyester king brocade, and lining is black cotton twill.
Construction 6 panel pattern, constructed using the sandwich method. The panels are stitched with a lock-stitch, and the corset is double-boned on the seams (bones sandwiched between the layers).
Binding Bias strips of matching poly brocade. Top-stitched on both outside (tiny topstitch) and inside (overlock finish, not folded under). Includes 6 garter tabs at the bottom.
Waist tape 1/2″ wide tape in between the layers, stitched from the 2nd panel to the 5th panel.
Modesty panel Modesty panel is nearly 7″ wide and finished in matching brown brocade. Unstiffened and stitched to the corset on one side (easily removable). No modesty placket in the front by the busk.
Busk 11 inches long with 5 loops and pins, equidistantly spaced. Standard flexible busk (1/2″ wide) and supported by two more flat steels on each side.
Boning 26 total bones not including busk (13 on each side). 1/4″ wide spirals, double boned on the seams. Two 1/4″ wide flats sandwich the grommets on each side.
Grommets 26 grommets total, size #0 (or possibly size 1 – it’s a big internal diameter) with a small flange and finished in dark silver. Set equidistantly, a little more than 1 inch apart. Holding in fairly well (the washers on the underside are wider than the top part of the grommets).
Laces Brown braided round cord. Slightly springy, and shreds when it catches on the split grommets, but difficult to snap. The cord felt a bit “waxy” to the touch but it held the bow just fine when I laced up my corset.
Price This corset is £65 on Burleska’s website.

*

Victorian double steel boned underbust corset in brown king brocade, as it's displayed on Burleska's site. Click through for more info.
Victorian double steel boned underbust corset in brown king brocade, as it’s displayed on Burleska’s site. Click through for more info.

This is the third corset I’ve reviewed from Burleska, and I can tell that their quality is slowly improving over time – this corset is indeed steel boned, made with higher quality materials, and is made from a curvier and more comfortable pattern compared to the two fashion corsets I had reviewed from the same company in previous years (2012 and 2014).

This particular corset style (longline, moderate hourglass) is very popular nowadays; the pattern is reminiscent to the Josephine by Isabella Corsetry (made in California) and the CS-426 from Orchard Corset (made in Pakistan), as well as several other corset brands. It’s interesting to see how each company puts their own unique spin on the same or similar corset patterns; for instance the king brocade fashion fabric options in Burleska’s case, a slightly shorter busk, different grommets, and a very slightly different construction method. I believe Burleska corsets are made in Nepal, if I’m not mistaken, so all three corsets have different manufacturers.

Posted on 4 Comments

Restyle Wide Hip Corset Review

Black Brocade longline underbust by Restyle, $52

This post is a summary of the “Restyle Wide Hip Corset Review” video, which you can watch on Youtube (below the table of quick stats) if you prefer:

Restyle Quick Stats

Fit, length Center front is 12 inches long, the princess seam (under the breast to top of the lap) is 9 inches long, with about 4 of those inches from the waist up. The side seam is 12 inches, and the enter back is shorter at 11.5 inches because it sweeps up at the bottom edge slightly.  Circumferential measurements: waist is size 23″ (label is size 22), underbust is 28 inches, high hip (iliac) is 35 inches, and the low hip at the lap is about 36 inches.
Material Fashion fabric is polyester black brocade (but it’s also available in matte black cotton), the strength layer is black cotton bull denim.
Construction 6 panel pattern (12 panels total). Panels 1-2 taper in the lower front, and most of the curve of the hip is in panels 3-4.
For the construction, the fashion fabric and strength fabric have been tightly fused and the corset was constructed like a single layer corset. Panels were lock-stitched, and double boning channels were made with internal strips of black cotton twill over the seam allowances.
Binding Bias strips of black cotton twill, machine stitched on outside and inside. There are also 4 garter tabs (2 on each side).
Waist tape Waist tape has been added to all Wide Hip corsets as of May 2015.
Modesty panel Modesty panel is 6.5″ wide (will cover a back gap up to 4.5 inches wide) and finished in the same black brocade as the fashion fabric. It is unstiffened, and stitched to one side of the back of the corset (can be removed if desired). 1″ front modesty placket under the busk, finished in black brocade and stiffened slightly with buckram.
Busk 10.5 inches long with 6 loops and pins, equidistantly spaced. Wide heavy busk (1 inch on each side). It sounds like there’s a buckram reinforcement around the busk.
Boning 24 total bones not including busk (12 on each side). 1/4″ wide spirals, double boned on the seams. Two further 1/4″ wide flats sandwich the grommets on each side.
Grommets 24 grommets total, size #00 with a small/medium flange and finished in silver. Set equidistantly, about an inch apart.
Laces Black flat shoelace-style laces, slightly springy, but not annoyingly so. They slide through the grommets, but I find that they snag more than flat laces.
Price About €42 on the Restyle site, which converts to around $50 USD.

This corset has added a new price bracket to the market of fairly decent OTR corsets, offering a curvy longline corset for close to $50 USD. It’s what I call a “longline corset for a short-waisted person“, offering some hip coverage and lower tummy control while not being so long that it causes more petite wearers problems with underwire entrapment or problems sitting down. For someone with a longer torso like myself, you may find that the “underbust” line of the corset stops a few inches short of your true underwire point.

The silhouette is quite curvy, and has a slightly conical ribcage. I am not able to completely fill all the space at the high hip due to my natural body shape, so there is a “pocket of air” between myself and the corset. For this reason, I say that this style corset is excellent for people who have naturally prominent hip bones or a high square hip shelf – I can’t imagine how this corset would ever press into the high hip!

When I got this corset in 2014, the corsets didn’t have a waist tape included and they also had a tendency to run slightly large (at least 1 inch bigger at the waist than the label) however this has since been rectified, and the owner Ewelina now says that all wide hip Restyle corsets come with an internal waist tape and they are checked for accurate sizing these days.

Ewelina also says that the corset is suitable for waist training or daily wear, with a two-year guarantee. As of 2016, Restyle has since added some new styles, both in the popular Wide Hip (denoted by WH) style and also in a new “CU” corset style, which I have yet to review. Find the Restyle corsets here.

Posted on 7 Comments

Corsets Boulevard Global Curvy Overbust Review

This post is a summary of the “Corsets Boulevard Global Corset Overbust review” video, which you can watch on Youtube if you prefer. Unfortunately Corsets Blvd Global’s website was hacked so I have removed all links to it. This review is staying up for posterity.

Fit, length Center front is 16.5 inches long (due to the tabs that extend down in the front), the princess seam (where you see the highest part of the sweetheart of the bust) is 16 inches long, the side seam is 15.5 inches, and the enter back is shorter at 13 inches. Circumferential measurements: waist is size 24″, full bust is between 34-35 inches, high hip (iliac) is 34-35 inches as well, and the low hip at the lap is about 37 inches in circumference. The silhouette is relatively curvy, definitely a traditional hourglass.
Material Fashion fabric is black satin (but can be specially ordered in any color satin), the strength layer is black twill.
Construction 6 panel pattern (12 panels total). Most of the ease for the bust is in panels 1-2, and most of the ease for the hip is in panels 3-4. The construction is the “welt-seam” method, which is different from a normal topstitch. The corset is double boned on the seams, and sandwiched between the layers.
Binding Commercial strips of 1-inch-wide black satin ribbon (so it wasn’t folded under; the edges of the ribbon were left raw). There are 6 garter tabs.
Waist tape No waist tape (at least, none could be detected when I inspected the corset carefully).
Modesty panel Modesty panel is around 5″ wide (will cover a back gap up to 4 inches wide) and finished in the same black satin as the fashion fabric. It is unstiffened, and stitched to one side of the back of the corset (can be removed if desired). Unstiffened front modesty placket under the busk, again finished in black satin.
Busk 14.5 inches long with 8 loops and pins, equidistantly spaced. Standard flexible busk (half inch on each side).
Boning 24 total bones not including busk. 1/4″ wide spirals, double boned on the seams. Two further 1/4″ wide flats sandwich the grommets on each side, making a total of 12 bones on each side.
Grommets 26 grommets total, size #00 with a small flange and finished in silver. Set equidistantly, about an inch apart.
Laces Black round cord, it is small enough and slick enough to slide through the grommets, but I find that they snag more than flat laces.
Price £55 or around $68 USD
The Curvy overbust as it appears on Corsets Blvd Global's website. Click through to learn more.
The Curvy overbust as it appeared on Corsets Blvd Global’s website. Since the site was hacked, I have removed all links to it.

This corset is definitely one of the least expensive overbust corsets for curvier wearers, offering a 10-11 inch bust spring, and a 13 inch low hip spring. This brand also offers a large range sizes for this corset, from 18″ up to 40″.

I also appreciate how high the corset comes up over bust, and continues high around the sides to control my “armpit squidge”. In the back it comes down a little lower, but not so low as to accommodate very low-back dresses.

The busk keeps my tummy flat, and doesn’t seem to bow outwards. Having 8 loops and pins, it’s one of the longest corsets I’ve tried to date!

The one feature I wasn’t crazy about are the flaps in the bottom of the center front which are not supported by any steel so they can bend upwards (and therefore don’t offer much in terms of function or support). I believe these to be a nod to the antique Edwardian suspender corsets, but obviously the suspenders/ garters were omitted in this style so the flaps is a bit “vestigial”.

Other overbust corsets of equivalent curve (and support for large cup sizes) tend to average around $300 USD, even for ready-to-wear. Yes, the satin of this piece isn’t quite as lush, and the stitchwork isn’t as pristine as the other brands — don’t expect this piece to live up to the standards as the others — but at its current price, it’s filling a place in the corset industry that other brands aren’t.

I wouldn’t personally waist train in this corset, due to the apparent lack of waist and due to the construction method causing one bone out of each pair being essentially held in by the satin fabric instead of being securely sandwiched into a denser weave cotton (there may be a risk of a steel bone popping through the fabric if this is worn daily for weeks or months). But it would be great for occasional use, special events, and possibly to use as occasional relief from a heavier bust.

On the Corsets Blvd Global site, this curvy overbust in black satin is named the “Keira” corset, and if you get it before February 15, 2016, it will be £55 or around $68 USD currently. Unfortunately Corsets Blvd Global’s website was hacked so I have removed all links to it. This review is staying up for posterity.

Posted on 3 Comments

Xandriana Custom Tightlacing Underbust Corset Review

This entry is a summary of the review video “Xandriana Tightlacing Underbust Review” which you can watch on YouTube here:

 

Fit, length This corset is custom fit (made to measure), so a corset for you may fit differently. Center front is about 12 inches high, and the side seam is 9 inches high, back is 15 inches high. Modern hourglass silhouette – rounded over the ribcage and rounded over the hips. Slightly longline.
Material Outer layer is pale pink satin (might be satin coutil). Lined in white herringbone coutil.
Construction 6 panel pattern. Panels are assembled using a topstitch. Bones are sandwiched between layers, double boned (one on the seam and one in the center of the panel).
Binding Matching strips of pale pink satin, machine stitched on the outside and hand finished on the inside.
Waist tape 1 inch wide waist tape, stitched invisibly between the layers.
Modesty panel Modesty panel is suspended on the laces and boned in a criss-cross fashion. A 1″ wide unstiffened placket in front.
Busk 11 inches long, standard width busk (half inch on each side) with 6 knobs and loops, the bottom two a little closer together. Reinforced flat bones on either side.
Boning 28 bones total (14 bones per side). Mostly 1/4″ wide spiral steels, single boned on the seams plus extra bones in the middle of the panels. There are two flat steels sandwiching the grommets as well, and two flats by the busk.
Grommets 28 two-part Prym eyelets, size #0, medium/large, held in strongly. Finished in silver and set a bit closer together at the waistline. Good wide washers, few splits but don’t catch on the laces.
Laces Laces are 1/2″ wide double-faced satin ribbon, finished in pale pink.
Price At the time I’m writing this, a custom underbust starts at $300 USD (suitable for tightlacing but not waist training). For a waist training custom corset, the price starts at $400.

Final Thoughts:

This corset was a bit of a serendipitous find. I had been meaning to try a corset from Xandriana for awhile, as one of my acquaintances (a previous client of Xandriana’s) had positive things to say about the craftsmanship.

So when I joined the Corsets On Sale group on Facebook and found another person who was selling their old Xandriana corset, with measurements very close to my own, I immediately jumped at the opportunity! The lovely pearlescent finish and the cheery flossing were even cuter in person, and I was pleased to see that the corset was not actually white, but actually the palest, most delicate shade of pink. I also liked the very high back of this corset as it provided excellent support while sitting at my desk, and it made muffin top virtually impossible. After uploading this video, I had the opportunity to talk with the corsetiere, and discovered that the flossing was actually done by the first owner of the corset.

Although this particular corset is not advertised for waist training, its construction is stronger than many other corsets out there that do claim waist-training-friendliness – one of my favourite features in this corset is the distribution of the boning. In corsets that are simply double boned on the seams, it can sometimes feel like the double bones make it “too rigid” in places, while there are vast spans of wrinkled, unsupported fabric between the bones. When you have one bone on the seam and one on the channel (as in this corset), the distribution is more even, which can help prevent pressure points on your body and prevent ugly wrinkling in the corset, resulting in a beautifully smooth and comfortable corset. The darker pink flossing in a clean V shape on the boning channels was also a nice visual touch, and highlighted the fact that this corset had quite even bone distribution.

This is a lovely little corset; the only changes I would make is to perhaps have the bones in the very back bow a little less – but as I am the 2nd owner of this corset, I know nothing of its previous treatment nor anything about the customer service from Xandriana.

Looking at the different  listings in Xandriana’s Etsy shop, it seems that the tightlacing underbust has only 1 layer of coutil, and a non-specific number of bones; while the waist training version has 2 layers of coutil and a guaranteed minimum of 26 bones, and more depending on the size and reduction. If you would like to learn more about the different options Xandriana offers, do visit her website here.

Posted on Leave a comment

Electra Designs Longline Underbust Corset Review

This entry is a summary of the review video “Electra Designs Long Hip Underbust Review” which you can watch on YouTube here:


 

Fit, length Center front is about 11 inches long, 9 inches long. Wasp waist silhouette. Standard size 22T long hip underbust – the underbust is 28″, waist is 22″, hips at iliac creast is 33″ (which is where my iliac crest hits). Gives a flat profile (doesn’t make me look thicker from the side) and the hips are slightly squared instead of rounded.
Material Fashion layer is blue satin (fused to soft interlining); strength layer (lining) is cotton herringbone coutil.
Construction 6 panel pattern. Top-stitching between panels, stitched 4 times between panels (extremely sturdy). Many many sandwiched bones. No garter tabs, but they can be added if you commission a piece.
Binding Black bias strips of satin, machine stitched on both sides and very tidy.
Waist tape 1″ wide waist tape invisibly secured between the layers.
Modesty panel No modesty panel came with this sample, but is available for a markup. Unstiffened placket in front made from a matching blue satin.
Busk Standard width flexible busk, 10 inches long (5 pins, the last two closer together). Reinforcing flat steel bone on either side of the busk.
Boning 26 steel bones (13 on each side), 1/4″ wide spiral bones on each seam and also in the middle of the wider panels. 1/4″ wide flat steel bones in front and back, and special lacing bones in the back (bones with holes drilled into them so the grommets won’t ever rip out).
Eyelets 20 in total, size #00 two-part eyelets with small flange; set equidistantly (they have to be because they’re set into a lacing bone); high quality – no splits, no wear/fraying/pulling out of grommets. Washer on the back is larger than the top-hat flange of the eyelet for extra support.
Laces Matching blue double-face satin ribbon, 1/2 inch wide. They glide smoothly through the eyelets, they grip well and they are long enough. Very easy to lace up, zero stretchiness.
Price At the time I’m writing this, the standard sized long hip underbust with the gently-rounded top and bottom edges is $400 USD. You can see other style options on her website here.

Final Thoughts:

 

A close-up view of myself in Electra Designs’ standard size long hip underbust.

This corset was a sample sent to me on loan so that Alexis could test the fit of her new standard size corsets, as a bit of a glorified mockup fitting – I asked her if I could also review this corset on my channel before returning the corset to her, and she graceously agreed. I believe Alexis had modified and updated her old standard size chart, modelling the new proportions off an average of her past many clients, and off her realistic Alvaform dress forms. I was very happy to try the new standard size corsets and find that it is slightly broader through the ribcage compared to the old standard sizes, so the corset holds in all of my flesh and doesn’t give me any ‘muffin top’ in the back. I would just need the corset to have a bit of a longer torso for it to fit very closely to some of my other custom-fit corsets! 

The flexible lacing bones follow the natural curve of my spine, allowing me to hold a neutral posture in this corset – I feel that this style of lacing would be excellent for those who have lordosis (swayback) as it doesn’t force the wearer to “flatten” the lumbar spine or hunch over. Additionally, I feel that this corset preserves my naturally flat profile and doesn’t make me look “thicker” from the side, the way that some other corsets do. Because the lacing bones are so flexible though, you must take care to tighten the corset with as parallel a gap as possible – otherwise the back may bow outwards at the waist, and look like “( )”.

As always, Alexis’ construction technique is extremely strong and definitely suitable for waist training – Alexis remains one of my favourite corsetieres and I look forward to commissioning her for a custom in the near future. At the moment she is busy creating a multimedia corset making instructional course, which you can learn more about on this page!

To see other styles from Electra Designs, do visit the official website here.

Posted on Leave a comment

Versatile Corsets Foxglove Underbust Review

Foxglove Blue underbust corset Versatile

This entry is a summary of the review video “Versatile Corsets FOXGLOVE Underbust Review” which you can watch on YouTube here:

 

Fit, length Center front is about 13.5 inches long, from underbust to the lap at the “princess seam” (the side-front) is 12.5 inches long. This is one of the longest corsets by Versatile, appropriate for people with long waists or tall stature. Longline corset, covering the hips and controlling the lower tummy.A bit conical through the ribs, but the hip ties allow for a dramatic hip spring. The underbust is about 6″ larger than the waist, and the hips can be expanded from 7-16+ inches greater than the waist. This corset is also available as a custom-fit option.
Material 2 main layers: the lining is 100% cotton white twill (although custom commissioned corsets from Versatile will contain herringbone coutil lining). Fashion fabric is hot pink dupioni silk (interfaced for strength), and a pretty patterned Thai silk in the center front (the large motif expertly matched).
Construction 6 panel pattern. Twill lining is flatlined/rollpinned to silk fashion layer; top-stitching between panels (seams are double-stitched at minimum), sandwiched boning channels between strips of fabric and the lining. The fashion layer is mostly a floating layer. Also contains 8 garter tabs (4 on each side).
Binding Made from bias strips of printed Thai silk to match the center front panels. Machine stitched on outside and inside.
Waist tape 1″ wide waist tape exposed on the inside, sandwiched between two main layers of material.
Modesty panel Attached 7.5″ wide fabric lacing protector on the back, covered in matching pink silk, stitched on one side of the corset. Unstiffened placket under busk made from matching Thai silk.
Busk Standard flexible busk (1/2″ wide on each side) about 12″ long (6 pins, equidistantly spaced), reinforced with a flat steel bone on each side.
Boning 22 total bones not including busk, all flat (spring) steel bones. On each side they are double boned on the seams (1/4″ wide), 2 sturdier flats sandwiching the grommets and another flat bone beside the busk.
Grommets 28 grommets total, size #00 two-part grommets with moderate flange; set equidistantly, no splits, no wear/fraying/pulling out of grommets. This type of grommet is my personal favourite used in American-made corsets.
Laces 1/8 inch wide round nylon cord – strong, virtually unbreakable, not stretchy, glides well through the grommets and doesn’t catch, but they’re slippery.
Price Currently $329 USD for the standard size and basic fabric on the Versatile website. For the Candy Garden special summer version, it starts at $369

Final Thoughts:

This is part of a collection of reviews that I did for Versatile Corsets/ Corset Connection. In addition to the Foxglove corset, I also reviewed the Dita underbust, the Snapdragon underbust, the Valerian overbust, the Scarlett overbust, the Lotus overbust and the Mimosa overbust.

 

Special “Candy Garden” version of the Foxglove corset (click through the photo to see this version on their website).

This particular Foxglove was one of a kind, with its hot pink dupioni silk, frilly trim and perfectly print-matched center front motif. For those who think there is too much going on for their tastes, the Foxglove underbust is available in solid colors without the frills or fun center motifs. Shown to the left is the special “summer” version, which, while not like the one I had modelled, features a gorgeous floral motif instead. This might be one of the happiest-looking corsets I’ve tried in person.

I found the length and the dimensions of this corset to be very similar to the “Nicole” corset by Vollers reviewed HERE, but this style is very gently swooping on the top and bottom edges instead of cut straight across, and of course the side hip ties are extremely useful for achieving a serious cinch in the waist while keeping the hips comfortable. Because of this, the corset is adjustable depending on your own hip spring, and may be able to fit a variety of body types regardless of your natural hip spring.

Do note that this corset is available as a custom piece for a markup in price – this means that you can have the corset made shorter, made with more or less rib-spring and hip spring, and also made with any combination of fabrics available. You can see the regular Foxglove corset on the Versatile website HERE, and the Candy Garden version HERE.

Posted on Leave a comment

Corset Connection “Summer” / Vollers “Nicole” Underbust Review

Vollers Nicole Corset 1891 longline

This entry is a summary of the review video “Corset Connection “Summer” / Vollers “Nicole” Underbust Review”. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

Fit, length Center front is 12.5 inches. The length is almost the same all the way around the corset. Very much a longline corset – comes over the hips; I personally find it a bit difficult to sit in – recommended only for those who are tall/ with a long torso. Modern slim silhouette; very gentle curves. Circumferential measurements: Underbust 28″, waist 22″, iliac crest 28″, low hip 32″.
Material Fashion fabric is black 100% polyester satin; lining is a black cotton-poly blend twill.
Construction 7 panel pattern, but extremely unique. Two panels above the waist, two panels below the waist, one central “belt” panel, and then center front and center back longer panels (see video for details). Top-stitched between panels. Corset has internal boning channels.
Binding Commercial black satin ribbon, machine stitched on front and back (not folded under, as the ribbon is already finished/ won’t fray on the edges). 4 garter tabs, and this corset also came with garters.
Waist tape The “belt” panel is in one piece and effectively acts like a waist tape would.
Modesty panel 6 inches wide, unstiffened, and covered in matching black satin/twill. Secured to the corset with a line of stitching (removable). Front modesty placket made from black twill under the knob side of busk, and satin flap over the busk helps to hide the busk overtop.
Busk Standard flexible busk, 11″ long and ½ inch wide on each side, with 5 pins (lower two pins are closer together). There’s another ½ inch wide bone on either side of the busk for reinforcement.
Boning 16 bones total in this corset. There are 10 spiral bones (5 on each side), single boned between the panels. ½ inch wide flat on either side of the busk, and in the back there are ¼ inch wide flats sandwiching the eyelets.
Eyelets Vollers uses 1-part eyelets instead of 2-part grommets. 28 of them total, and set equidistantly. There is no washer on back and the eyelet is perforated to split. Vollers says these eyelets are used in heavy boots so will take quite a bit of stress without pulling out.
Laces 1/4 inch wide black flat braided shoelace style laces. Resistant to catching or fraying; minimal stretch or spring, and hold the bow well.
Price £150 on the Vollers website (as the “Nicole” corset), or $290 on the Corset Connection website (as the “Summer” corset).
Vollers Nicole Corset 1891 longline
Vollers Nicole Corset 1891 longline (“Summer” corset from Corset Connection)

Final Thoughts:

Corset Connection is an official retailer/ distributor of many different corset brands, of which Vollers is just one! This is the reason why this particular corset goes by two different names. Customers in the US may find it easier to purchase from Corset Connection because of shipping times and not having to deal with currency conversion or taxes/duty. Those in the UK may find it easier to purchase from Vollers, for the same reasons. Please note the “Summer” is the name of the corset; it is not intended to be a description of the corset (as in, not strictly to be worn as a corset worn for summertime). This corset is not available as a ventilated or mesh corset.

This corset is one of the most uniquely patterned corsets I have ever tried – with a 7-panel pattern fitting together more like Tetris blocks as opposed to all vertical panels, and having one seamless “waistband” or belt panel take the role of the waist tape, I loved studying this piece to see how it was constructed.  Unfortunately this pattern was very much not suited for my figure, and would be better for someone both taller and with slimmer hips than I have. I would be very curious to know how this pattern would be altered, should one opt for the custom-fitted version on Vollers’ site.

Another feature I appreciated in this corset was the busk cover which allows you to hide the hardware – this would potentially help with “stealthing” a corset under clothing, as the bumps and the shininess from the visible loops and pins would be concealed.

I do prefer corsets that are more heavily boned, and that have two-part grommets instead of one-part eyelets, however for occasional wear (not waist training) it would likely be alright and give a lovely slimming silhouette reminiscent of a 19teens figure. Do note that unless you choose the custom-fitted option, Vollers specializes in a mild, slim silhouette; not a dramatic wasp waist. Those in the UK can find the “Nicole” corset here, and those in the US can find the “Summer” corset in stock here.

Posted on Leave a comment

Sinner Couture Tightlacing Underbust Corset Review

This post is a summary of the “Sinner Couture Custom Underbust Corset Review” video, which you can watch on Youtube if you prefer:

 

Fit, length This corset was custom made to my measurements. The center front is 11 inches, and from underbust to lap (along the “princess seam”) is 9.5 inches long. I consider this a modern hourglass; the ribs and hips are both rounded. It’s a little bit longline on me
Material 3 main layers: fashion fabric is limited edition Italian floral jean/twill; strength interlining layer, and floating lining.
Construction 7 panel pattern. Panels are assembled with a top-stitch, the corset is single boned on the seams. Floating lining.
Binding Commercial black bias binding. Machine stitched on the outside and hand-finished inside.
Waist tape 1-inch wide waist tape stitched invisibly between the layers.
Modesty panel 5.5 inch wide back panel, unstiffened, attached to one side (cannot be removed), and finished in the same floral twill. Also has a tiny unstiffened modesty placket on the knob side of the busk.
Busk 9.5 inches long standard flexible busk with 5 pins (bottom two are a little closer together). The topmost inch or so does not have a busk and instead ties with a black ribbon.
Boning 16 total bones not including busk. On each side there are size 1/4″ spiral steel bones. Two further 1/4″ wide flats sandwich the grommets on each side. The number of bones in a corset depends on the size and waist reduction.
Grommets 24 grommets total, size #00 two-part grommets with small flange; set equidistantly. Finished in an “antique brass” colour, and all are holding in well.
Laces 3/8″ wide black satin ribbon; no stretch, glides well enough through the grommets without slipping.
Price At the time that I’m writing, it is $300 USD in her Etsy store.

Other thoughts:

This corset is one of my favourites of my collection. The corset itself is very soft, in that it molded to my body from the very first wear (it almost felt as though it didn’t need seasoning, although I was good and did season it properly). I also felt as though it accommodated my hip asymmetry very well, despite being a symmetric corset. This corset is designed for tightlacing but not waist training – considering how often I wear this corset though, I believe it has held up very well over time; the grommets continue to hold in well and the waist has not stretched out. Although there are relatively few bones in my corset, I feel that there is minimal wrinkling and the corset holds itself well.

This corset is offered in cotton or satin, but Yana also carries some exclusive Italian printed fabric – the floral jean fabric used on my corset was a limited option; Yana only had about enough to make one corset from at the time. At first I didn’t know if I would like the subtle earth tones, but I’m so glad that I chose this design – it’s even more gorgeous in person, and I get complimented on this corset whenever I wear it. The corset also came in a custom-sized little drawstring bag for easy storing.

Based on the measurements of my corset, and how Sinner Couture’s corsets are laced in her Etsy store, I believe that the corset was designed to be worn with a 1-2 inch gap in the back. If you prefer to wear your corset completely closed in the back, please let Yana know so she can draft it that way.

You can purchase the custom tightlacing corset from Sinner Couture through her Etsy store here.

 

Posted on 1 Comment

Burleska Corsets Athena Underbust Review

This entry is a summary of the review video “Burleska Athena underbust review” which you can watch on YouTube here:

Fit, length Center front is 14.5 inches high (the longest OTR underbust I have ever tried!) and side seam is 12 inches. Not recommended for shorter torsos. Gentle hourglass / modern slim silhouette. Underbust circumference is 30″, waist 24″, low hip is 36″ (gives an impressive 12″ hip spring).
Material 2 main layers. Fashion fabric is black poly satin, lining is black cotton twill.
Construction 6 panel pattern, fashion fabric and lining were flatlining together, panels assembled using a topstitch. External boning channels (double boned on the seams)
Binding Hand-made bias strips of matching black satin, machine stitched on the outside and hand-finished inside for a couture finish. 6 garter tabs.
Waist tape 3/4-inch wide waist tape made from ribbon, stretching from panels 2-5 (first and last panels don’t have a waist tape)
Modesty panel 6 inches wide back modesty panel (4″ usable space). Two layers, unstiffened, attached to one side of the corset. No modesty placket in front by busk.
Busk 12.5 inches long, standard flexible busk with 6 pins (bottom two closer together). Supported by flat steels on either side of the busk.
Boning 26 bones total, 13 on each side. The flats by the busk in the front and in the back by the grommets are steel boned, but the side bones in the external channels are plastic boned.
Grommets 26 two-part grommets, size #0 or #1, fairly small flange. silver finish. Set equidistantly. Back of the grommets have multiple splits but don’t catch on the laces.
Embellishment 1/8 inch thick round, dense nylon cord. Quite grippy and holds bows well.
Price At the time that I’m writing this: £50 in the UK, or around $80 in the US.

Other Thoughts:

Burleska Athena corset as it is seen on the website

This is the second corset I’ve reviewed from Burleska (the first review you can read here). Two years later, Burleska had contacted me directly and mentioned that their line of corsets have improved and asked if I would be interested in trying some of their new stock. I agreed to trying this Athena underbust as it seemed to have the most unique construction and the most impressive curves! When I tried on the corset, indeed it gave a flattering silhouette, but unfortunately this piece had been plastic boned as well. The Burleska executives didn’t know that they were plastic as they had been told by their own manufacturer that they were steel – so these corsets are currently receiving an overhaul and Burleska says that they will be more careful about this in the future. I taught them the “magnet trick” to check for ferrous substances inside of a corset (like the steel bones) without having to open up the corsets. I’m not upset about this though; it takes great integrity in a company to admit that they were mistaken, to listen to their customers and to commit to changing their product to keep the trust of their clientele. So all is well that ends well; I wish Burleska success in the future and look forward to seeing what new items they design for their upcoming genuine steel boned line.

You can find the Athena corset on Burleska’s website, here.

Posted on 1 Comment

Sugarkitty Corsets Abigail II Custom Underbust Review

This entry is a summary of the review video “Sugarkitty Abigail II Underbust Corset Review” which you can watch on YouTube here:

Fit, length This corset is made-to-measure so highly customized; therefore the hard numbers are moot. Dramatic, very nipped-in modern hourglass silhouette. I can lace down smaller and more comfortably in corsets with this type of silhouette, as it doesn’t compress my ribs.
Material 5 layers (if you count the fusible webbing). Outside and inside are both black twill and there is also a strength layer between them (interlining).
Construction 5 panel pattern; panels assembled using the sandwich method (lock-stitched and very sturdy), and double-boned on the seams, sandwiched between two layers. Sugarkitty mentions that she no longer uses the sandwich method but more recently uses a more sturdy construction.
Binding Hand-made bias strips matching in black twill, machine stitched on the outside and inside.
Waist tape 1 inch wide invisible waist tape – sandwiched between the layers.
Modesty panel Boned and suspended panel in the back, and panel is contoured in an hourglass shape (very comfy). Also has modesty placket under knob side of busk.
Busk 10″ long standard flexible busk, with 5 loops/ pins set equidistantly. 1/2″ wide, but reinforced with other flat bones on either side.
Boning 24 bones total, 12 on each side (not including the busk). This corset has an upgrade of 1/2″ spiral bones (instead of traditional 1/4″ bones), double-boned on the seams – there is hardly any “unboned” space around the waist.
Grommets 32 two-part grommets, size #00, fairly large flange, quite sturdy. Black finish. Set closer at the waistline for easier cinching. Large washers on the underside, virtually no splits in the back, no catching.
Laces Very long, super strong polypropylene laces (another upgrade from Sugarkitty). No stretch, virtually impossible to break, holds knots and bows well.
Price At the time I reviewed this piece, the standard size Abigail II was $377, and custom fit was $481.

Other Thoughts:

Sugarkitty Corset as it appears on her Facebook Fanpage.

 

This corset was sold to me 2nd hand from a friend with very similar measurements (she’s just a touch shorter in the torso compared to me). It has such an awesome silhouette that I couldn’t pass up the opportunity to add it to my collection. Because the corset was made to fit her specifically, and also drafted to have this specific shape with the rounded ribcage and nipped-in waistline, the measurements of this corset are a tad moot – although I will say that the “free” rounded ribcage area makes this corset extraordinarily comfy! I lovingly call this my “almost-pipestem” corset.

Because this corset was made around early 2012, it was around 1.5 years old by the time I reviewed it so Sugarkitty had changed some of her construction techniques between now and then. Unfortunately, I won’t be able to review any of her more modern pieces anytime soon as she has retired from making corsets (at least for the time being) in favour of other artistic ventures. I personally know that I will be keeping this unique piece in my collection though, and will be waiting in line for a custom piece of my own should she ever decide to resume taking corset commissions!

If you would like to see what Sugarkitty is up to these days and to buy some of her samples and accessories, be sure to check out her website here.

Posted on Leave a comment

L’Atelier de LaFleur Longline Underbust Corset Review

This entry is a summary of the video “L’Atelier de LaFleur Underbust Corset Review” which you can watch on YouTube here:

 

Fit, length My corset has a standard size 24″ base (ribcage 30″, hips 32-34″), but had been semi-customized. I asked for more length from waist to ribcage, a high-back, and for the waist to be nipped in another inch. Modern hourglass silhouette.
Material 3 main layers. Fashion fabric is silk Chinese brocade, strength fabric of herringbone coutil, floating lining of special cooling cotton fabric.
Construction Probably 5-panel pattern, fashion fabric flatlined to coutil, external boning channels (some on the seams, some in the middle of the panel), and floating liner.
Binding Hand-made bias strips of complementary pink satin, machine stitched on the outside and hand-finished inside for a couture finish.
Waist tape 1 inch wide invisible waist tape – sandwiched between the layers.
Modesty panel No back lacing protector because I didn’t order one – but one can be ordered if desired. The front has a boned underbusk/ placket which helps keep the front flat.
Busk 12.5 inches long and standard width (0.5 inch wide) matte-black busk with 6 loops/pins, with the two lowest ones closer together.
Boning 24 bones total. On each side there are 9 spirals in external channels; the remainder are flats by the grommets or supporting the busk.
Grommets 34 two-part grommets (because of the very high back), size #00, medium flange, quite sturdy. Black finish. Equidistantly spaced, few splits but don’t catch on the laces. The laces themselves are a great nylon flat shoelace that is grippy like cotton.
Flossing Mina’s unique design on the bottom of the external boning channels, almost reminds me of a T4 bacteriophage – very cool!
Price At the time I’m writing this, it would cost $375 for a standard size longline corset, and a recreation of my own corset would be $565 CAD.
My first wearing of the completed corset, in Mina’s studio in Toronto.

It’s no secret that this corset has become one of my instant favourites in my collection. Mina’s work is absolutely pristine, and I feel extremely fortunate to have had the opportunity to be personally fitted by her (and to have my own measurements match her standard measurements so closely!). It’s difficult not to wax poetic about this corset; not a stitch is out of place. I can see myself ordering from her again a few years down the line.

Despite the rather thin flexible busk I provided (only because I wanted all matte black hardware), Mina had supported it enough with bones on either side and also a heavy boned underbusk (modesty placket) so that the profile remains beautifully straight and flat. The bones are dispersed around the waist such that there is no more than 1 inch around the waist that is unsupported, which leads to a very sturdy and comfortable wearing experience. The high back is wonderful for my posture and the extra length in the ribcage helps prevent me from slouching like few other corsets are able to do.

If anyone would like a breakdown for the cost of my corset:
Longline underbust $375
High back modification: $10
Single external bone casings instead of double $25
Brocade fashion fabric $15
Contrast casings/trim (the pink against the brocade) $15
Bone flossing on bottom edge, and floating lining $125
Total $565

However, I’m not hyperbolizing when I say that this corset is worth every penny. The entire experience, from meeting with the designer, consulting, fitting and receiving the final product, has been nothing but a joy. If you would like to see more work by L’Atelier de LaFleur, you can visit Mina’s website here.

Posted on 2 Comments

Serindë Couture Silk Overbust Corset Review

This entry is a summary of the review video “Serindë Couture Silk Overbust Review” which you can watch on YouTube here:

Serindë is a lovely small-business corsetiere based in Lyon, France – although her international shipping rates are very ideal! She’s known for adding jewelry and charms to her corsets, and her beautiful whimsical designs inspired by fairies and folk-lore, and she makes very sophisticated and sultry pieces as well, as evident in this gorgeous romantic overbust.
She currently doesn’t have a website but you can find her on Etsy, DaWanda, and Facebook.

Fit, length This overbust is a sample so the measurements of this corset may not reflect the measurements of a custom-fit overbust you commission from Serindë. Center front is 14″ inches long, and from peak of the bust to the curve of the lap is also 14″. Lovely hourglass silhouette with a conical ribcage and rounded, feminine hips. Longline corset, and the mild sweetheart is designed to be almost a mid-bust rather than a full overbust. I like the rounded contour of the bust area. Large hip spring; very comfortable in the hips. Recommended for hourglass and pear-shaped ladies, especially those with a bit of a smaller ribcage.
Material 3 layers; fashion layer is champagne dupioni silk backed with interfacing; strength layer is coutil, and the lining is soft cotton.
Construction 7 panel pattern with no hip gores – 4 panels in front contribute to smooth a smooth, rounded bust, and 3 panels in the back. Hip area is also very smooth with no wrinkles or puckering of the fashion fabric. Top-stitching between panels, sandwiched boning (two per seam), and a floating liner (very comfortable). 6 total garter tabs.
Binding Black satin bias tape, neatly machine stitched because this was a sample for a photoshoot and time was of the essence. Serindë explains that she hand-finishes the binding on personal commissions.
Waist tape 1″ wide invisible waist tape between the strength layer and the lining.
Modesty panel Floating modesty panel suspended by a ribbon on the back, in matching dupioni; lightly boned. but does include a placket on the knob side of the busk.
Busk Standard flexible busk (1/2″ wide on each side) about 12.5″ long (6 pins), reinforced with a sturdy 1/4″ wide flat steel bone.
Boning 28 steel bones not including busk. On each side there are 11 spirals (1/4″ wide), double boned on the seams, 1 flat (3/8″ wide) beside the busk, and 2 flats (3/8″ wide) sandwiching the grommets.
Grommets 36 total, 5mm two-part eyelets (Prym brand, very good quality) with moderate flange; set well with the grommets getting closer together near the waistline, no splits, no wear/fraying/pulling out.
Laces 1/2″ wide double-faced satin ribbon in black. Very strong, has not broken or frayed despite lacing very tightly in this corset.
Price This sample was available on Etsy for €390 which is around $520; subject to change.

Final Thoughts:

This corset makes me feel like a princess. The dupioni silk lays perfectly smooth with absolutely no wrinkles – Serindë is a master in taming fashion fabrics and proper turn-of-cloth! The embellishments on the corset compliment one another so well, and are not overbearing – the hand-sewn lace motifs draw the eye to the waistline and create the illusion of an even smaller waist, while the hand-flossing on the ends of the bones balance out the embellishment on the top and bottom edges, and the beading/ Swarovski crystals add a bit of sparkle. I also like how the crystals are organically laid out and not symmetic on both sides. This creates somewhat of a “natural” type of beauty, as if the crystals stuck wherever the wind made them land. This also means that if I were to go out dancing in this corset and one or two of the crystals were to fall, then the corset would still look perfectly fine and finished. However these crystals hold very well and I don’t think they will be falling off anytime soon! The beaded straps, designed to fall off-the-shoulder, add another level of romanticism to this corset and are attached with a bit of elastic to protect the silk from ripping due to any tension, and also adds a bit of adjustability. This piece is pure grace and glamour.

To see Serindë’s standard size sale items, do check out her Etsy store here, and if you would like to commission a custom piece from her this year, don’t hesitate to contact her via email or Facebook.

Posted on Leave a comment

Sparklewren Couture Overbust Corset Review

This entry is a summary of the review video “Sparklewren Couture Overbust Corset Review” which you can watch on YouTube here:

Fit, length Front is about 10.5″ inches long, unique silhouette in which the ribcage follows the natural contours but nips in dramatically at the waist for a wasp-like effect. Hips likewise follow the body’s natural contours; very comfortable. Longline corset. Will hold in lower tummy pooch, recommended for extreme hourglass ladies. Exaggerated plunge neckline; I recommend using double-sided/ toupee tape if your breasts tend to migrate.
Material Fashion layer is 100% silk charmeuse; interlining is 100% cotton coutil, lining is cotton.
Construction 6 panel pattern. Top-stitching between panels, sandwiched bones, and a floating liner (very comfortable). No garter tabs.
Binding Matching silk charmeuse bias tape, hand-finished.
Waist tape 1″ wide invisible waist tape between the interlining and lining.
Modesty panel Floating 4″ wide stiffened lacing protector on the back; placket by knob-side of busk.
Busk Heavy-duty wide busk (1″ wide on each side) about 10″ long (5 pins), with several bones on each side.
Boning Continuously boned. 64 steel bones not including busk. I’m guessing 58 spirals (ranging from 5mm to 7mm wide) and 6 flats (6mm to 8mm wide) – two on either side of the busk and four sandwiching the grommets at the back.
Grommets 32 grommets total, size 5mm two-part Prym eyelets with moderate flange; set closer together at the waistline; no splits, no wear/fraying/pulling out of grommets
Laces Strong cotton braided shoe-lace style laces; they’re thin, they grip well and they are long enough. Very easy to lace up. Zero spring.
Price Sparklewren has every client sign a confidentiality agreement; please contact Jenni if you would like to commission a similar piece.

Final Thoughts:

This is my second corset purchased from Sparklewren, and my first true experience ordering bespoke from a professional corsetiere. This overbust was commissioned back in January/February of 2012, and completed in May. I was given the option of different colors of silk charmeuse, different types of antique lace and layout of said lace, different flossing motifs, etc. It was an incredibly exciting process and it fits like a dream, too. Jenni is a true artist in her field.
See more of Sparklewren’s creations at her website, here.

Posted on Leave a comment

Serindë Longline Underbust Corset Review

This entry is a summary of the review video “Serindë Underbust Corset Review” which you can watch on YouTube here:

Serindë is a lovely small-business corsetiere based in Lyon, France – although her international shipping rates are very ideal! She’s known for adding jewelry and charms to her corsets, and her beautiful whimsical designs inspired by fairies and folk-lore, although she makes very sophisticated and sultry pieces as well.
She currently doesn’t have a website but you can find her on Etsy, DaWanda, and Facebook.

Fit, length Center front is 12″ inches long. On my standard size 22″, the underbust is 27″, waist 22″, and hips 33″. Lovely hourglass silhouette. Longline corset, good for ladies with nearly all torso lengths, since the shortest part of the torso is 8.5″. Large hip spring; very comfortable in the hips. Will hold in lower tummy pooch; recommended for hourglass and pear-shaped ladies, especially those with a bit of a smaller ribcage.
Material 3 layers; fashion layer is silver-on-navy floral brocade backed with interfacing; strength layer is coutil, and the lining is soft cotton.
Construction 6 panel pattern with no hip gores. Top-stitching between panels, sandwiched boning (two per seam), and a floating liner (very comfortable). No garter tabs.
Binding Blue satin bias tape, beautifully hand-finished.
Waist tape 1″ wide invisible waist tape between the strength layer and the lining.
Modesty panel No modesty panel in the back on my version, but does include a placket on the knob side of the busk.
Busk Standard flexible busk (1/2″ wide on each side) about 10″ long (5 pins), reinforced with a sturdy 1/4″ wide flat steel bone.
Boning 24 steel bones not including busk. On each side there are 9 spirals (1/4″ wide), double boned on the seams, 1 flat (1/4″ wide) beside the busk, and 2 flats (3/8″ wide) sandwiching the grommets.
Grommets 30 grommets total, 5mm two-part eyelets (Prym brand, very good quality) with moderate flange; set well with the grommets getting closer together near the waistline, no splits, no wear/fraying/pulling out.
Laces 1/2″ wide double-faced satin ribbon in navy blue. Very strong, has not broken or frayed despite lacing very tightly in this corset.
Price Recently quoted on Facebook at €165 which is around $215; subject to change.

Final Thoughts:

I love this thing. This is another corset that I will likely never part with. I have to commend Serindëfor her ability to tame the temperamental Chinese brocade without one wrinkle or frayed edge whatsoever! The blue and silver colour scheme is gorgeous together and the silver hardwear completes the look so nicely. The jewelry chains draw attention to the hipspring by cascading down the sides of the hips. I love that I can dress this corset up or down, and remove the jewelry if need be. This corset is also very comfortable and I find that I can easily close this corset at the waistline, whereas in other 22″ corsets I’m limited  by the girth of the ribcage and hips. I only find this corset to be a tad small in the underbust area (the corset’s underbust is 27″, while my ribcage is usually 28-29″) but I knew this before I purchased the corset. Serindë is one designer you definitely need to watch in the near future!

To see Serindë’s standard size sale items, do check out her Etsy store here.

Posted on 3 Comments

Morgana Femme Couture MF1331 Corset Review

This entry is a summary of the review video “Morgana Femme Couture Longline Teal Silk Corset Review” which you can watch on YouTube here:

Fit, length Front is about 13.5″ inches long, traditional hourglass silhouette with conical ribcage. Longline corset, recommended for tall or long-waisted ladies. Very comfortable in the hip area. Will hold in lower tummy pooch, recommended for pear-shaped ladies.
Material 3 layers; fashion layer is silk dupioni, interlining is 100% English cotton coutil, lining of cotton twill. Boning channels are satin coutil.
Construction 6 panel pattern. Lock-stitching between panels – external boning channels strengthen seams. Floating liner (very comfortable). Also has 6 garter tabs.
Binding Black satin coutil bias tape neatly machine stitched on both inside and outside.
Waist tape 1″ wide invisible waist tape within the layers, secured down at boning channels.
Modesty panel None in back; unboned placket under busk.
Busk Standard flexible busk (1/2″ wide on each side) about 12.5″ long (6 pins), backed with a 1/4″ wide flat bone on each side.
Boning 24 steel bones not including busk. On each side, 9 spirals (1/4″ wide) in external channels, 2 flats (1/4″ wide) sandwiching the grommets and an additional flat steel by the busk.
Grommets 30 grommets total, size #0 two-part grommets with moderate flange; set equidistantly, no splits, no wear/fraying/pulling out of grommets. I love these grommets!
Laces Strong 1/4″ wide nylon braided shoe-lace style laces; they’re thin, they grip well and they are long enough. No spring to the lace.
Price Currently $230 USD on their Etsy store (standard size, ready-to-wear) or $290-$350 USD on the MFC website (made-to-measure and custom colours, price depends on the size).

Final Thoughts:

I was very pleasantly surprised by this corset. For a standard size corset, the hip spring is amazing and my ribs are beautifully tapered yet not too “scary” looking. This corset is the first time I have been able to close a 22″ off-the-rack corset all the way (previous styles have either been too restrictive in the hips or the ribcage to do so).
I’m also quite impressed with the quality of the materials in this corset. The dupioni silk fashion layer, English herringbone coutil strength layer, satin coutil boning channels and cotton lining look and feel strong yet luxurious. Once you go quality, you kind of don’t want to go back.
I found the price to be reasonable (at $230 it’s not much more than some other off-the-rack corsets, and actually less than certain other brands). The custom price is also justifiable, however I am curious to know where the corsets are actually manufactured. The one turn-off I have is the price markup for the 4 largest waist sizes (27″ – 30″). Yes, larger sizes do require more material but – with all due respect – having to pay nearly $60 more just because of a few more inches seems a little unfair. Perhaps I’m shooting myself in the foot (especially since I belong in the “smaller” group), but there must be some way to budget for the extra fabric used in larger sizes – even if this means marking up the smaller ones slightly.
Apart from that one small bug, I am thoroughly impressed with this corset – the materials and the construction are top notch for an off the rack piece.
To see this corset and other styles provided by Morgana Femme Couture, visit their website here. To see their selection of off-the-rack corsets, see their Etsy shop here.

Posted on 27 Comments

Orchard Corset Maroon Underbust (CS-426) Review

This entry is a summary of the review video “Orchard Corset Maroon Underbust (CS-426) Review”. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

Fit, length Gives a nice hourglass shape – this is a Level 3 silhouette, gives the most extreme curves. Center front is 13″, shortest part is 10.5″. Longline corset that comes over the hips. Quite comfortable.
Material 3 main layers – the outer satin fashion fabric, flatlined to a sturdy cotton interlining, and lined in twill.
Construction 6-panel pattern (12 panels total). The shape of the panels is very, very similar to the Josephine corset by Isabella Corsetry, although the contours are slightly less, the ribcage and hips a little smaller. Constructed with a slightly modified sandwich technique.
Binding Binding at top and bottom are made from matching maroon satin, double-thickness. I like how it’s very narrow. It’s machine stitched on both sides, folded under nicely on the front and then stitched in the ditch between the corset and the binding, to catch the rest of the binding on the underside.
Waist tape One-inch-wide waist tape running through the corset, hidden between the layers and glued to the lining.
Modesty panel There is a modesty panel on the back, made of a layer of satin and a layer of twill. 5” wide and attached to one side with a line of stitching, reinforced with glue.
Busk Standard busk, half an inch wide and 11” long, and 5 pins. However it’s less bendy than other busks of the same width, which is one perk.
Boning 22 bones total in this corset. On each side, 9 of them are spirals about 3/8 inch wide and then there are two flat steel bones, both ¼” wide sandwiching the grommets.
Grommets There are 24 2-part size #00 grommets (12 on each side). They have a medium lip around. They’re spaced equidistantly about 1” apart. I see some fraying and coming away of the fashion fabric around some of the grommets around the waist. On the underside every grommet is split and quite scratchy, they catch on the laces, the modesty panel and my shirt.
Laces The laces are ¼” wide flat nylon shoe-lace style. I find them to be long enough, a little springy but that’s alright because they’re still strong – you just have to tug a little harder to get the corset to stay closed because of the elasticity of the laces, is all – not a big deal.
Price Currently $95 USD, but you can save 10% by using the coupon code CORSETLUCY

 

Final Thoughts:
I really do like the shape this corset gives; it’s quite curvy (especially for its price). I wish they hadn’t used so much glue in the manufacturing, and that they could spend just a little more on higher quality grommets.

Lastly, one thing that made me PO’d (perhaps not the company’s fault but the shipper’s fault) was that I bought it on sale (around $59) but when it was shipped to me, the value on the package was stated as the original $95 which resulted in my having to pay higher duty/taxes coming into Canada. I ended up paying nearly as much in shipping/duty than I paid for the corset itself! International customers, be aware of this before you buy.

*** EDIT January 2014 – it’s been a couple of years since this review, and a few things have changed. Orchard Corset’s newer stock has higher quality grommets with fewer splits, and they recently introduced all cotton corsets, which are more sturdy than the satin ones and much less prone to coming away at the seams or having the bones pop out. Additionally, the owner of Orchard Corset mentioned that several years ago, they had placed the value of the parcel as product+shipping, which is why the price was so high and I was hit with duty. These days, OC says that they only place the value of the merchandise (the literal price paid for the corset itself) as the value of the parcel, and they don’t include the shipping price, so duty should be much lower for international customers.