Posted on 20 Comments

Orchard Corset CS-411 Underbust Review

This entry is a summary of the review video “Orchard Corset CS-411 Underbust Review”. If you want visual close-ups, you can watch the video on YouTube here:

Fit, length Center front is 10″, shortest part is 8.5″. It’s a shorter corset that fits closer to a cincher on my body. Gives a moderate hourglass shape – this is a Level 2 silhouette, so the ribcage is 4″ bigger than the waist, and the hips are about 8-9″ bigger than the waist.
Material 3 main layers – the outer coarse-weave poly-brocade fashion fabric, flatlined to a sturdy cotton interlining, and lined in twill.
Construction 4-panel pattern (8 panels total). The shape of the panels is very similar to the cincher by Isabella Corsetry, although the contours are slightly less, the ribcage and hips a little smaller. Constructed with a slightly modified sandwich technique.
Binding Binding at top and bottom are made from commercial black satin bias strips, machine stitched on both sides. There are no garter tabs in this corset.
Waist tape One-inch-wide waist tape running through the corset, hidden between the layers. I did not check to see if there was glue used in this one (see my CS-426 review if you want to know more about that particular corset).
Modesty panel There is a modesty panel on the back, made of a layer of black satin and a layer of twill. 5” wide (~3″ usable space) and attached to one side with a line of stitching.
Busk Slightly heavier busk, slightly under an inch wide and 9” long, with 4 pins. It is fairly sturdy; less bendy than a standard 1/2″ busk.
Boning 16 bones total in this corset. On each side, 6 of them are spirals about 3/8 inch wide and then there are two flat steel bones, both ¼” wide sandwiching the grommets.
Grommets There are 20 2-part size #00 grommets (10 on each side), with a small flange, spaced equidistantly. On the underside every grommet is split and quite scratchy, but they don’t catch on the laces so I can’t complain.
Laces The laces are ¼” wide flat nylon shoe-lace style. I find them to be long enough and quite strong, but also rather springy – you just have to tug a little harder to get the corset to stay closed because of the elasticity of the laces. However, Orchard has some higher quality laces (in several colours) available on their website – I very much prefer their ribbon laces to the standard shoelace style laces.
Price Currently $69 USD.

 

Final Thoughts:

Although this particular fashion fabric is not available to purchase through Orchard Corset (as it was a prototype), the cut of the corset, construction methods, and other fabrics/ materials should all be the same – so in this review I’m really commenting on these features as opposed to strictly the shell fabric.

I very much prefer this style of thicker poly-brocade compared to the thin shimmery satin shown in my CS-426 corset review. I found that satin had a tendency to wrinkle easily, when the satin started to pull in places, you could see the crossweaves of coral and brown threads and the wear of the corset was quite apparent. The satin also pulled and frayed easily where it had caught onto things (keep it away from any hooks, scratchy/sharp edges, or especially velcro!). This brocade is sturdier, doesn’t wrinkle as easily, is harder-wearing (doesn’t pull or fray as easily) and is better at hiding general wear and tear. A bird told me that Orchard may begin stocking all-cotton corsets in the future, which would be an even better choice for those looking for regular support.