Posted on Leave a comment

What Katie Did Vamp Corset Review

This entry is a summary of the video “What Katie Did (WKD) Vamp Corset Review”. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

 

Fit, length Center front is 11 inches long, the princess seam is 9 inches (4.5 inches above the waist, 4.5 inches below the waist), the side seam is 10 inches, and the center back is 11.75 inches long.
Rib spring is 7″, low hip spring is 13″. The rib is conical, and the hip spring is rounded / shelf-like and dramatic.
Material 3 main layers – the fashion fabric aubergine silk and contrasting pewter brocade (see Final Thoughts below), it has a cotton twill strength fabric, and it’s lined in black cotton twill as well.
Construction 7-panel pattern (14 panels total) including hip gores. Fashion fabric was flatlined to strength fabric, panels were assembled, and external boning channels laid down overtop. The lining is floating.
Waist tape 1-inch-wide waist tape, usually installed “invisibly” between the layers. This corset has an external waist belt which is aesthetic and also functional.
Binding Made from strips of pewter brocade, machine stitched on outside and inside (topstitch on both sides, may have a special attachment that stitches on the binding in one pass). Also has 6 garter tabs, 3 on each side.
Modesty panel Nearly 8″ wide, unstiffened, finished in aubergine silk (fashion fabric) and lined in cotton. Attached to the corset (sewn into the lining of the corset, so can’t easily be removed).
In the front, there is a 3/8″ wide placket under the knob side of the busk, slightly stiffened (buckram?) and finished in matching raw silk.
Busk 10 inches long, with 5 loops and pins, equidistantly spaced. 3/4″ wide on each side (slightly wider than a standard flexible busk), with an adjacent flat steel on either side of the busk for extra stiffness.
Boning 18 bones total in this corset, 9 on each side. Some seams are single boned and some seams are double boned, depending on how much space there is (perhaps the larger sizes have more bones?). The bones on the seams are all ¼ inch wide spirals. The bones sandwiching the grommets are ¼ inch wide flat steel, as well as the bones by the busk.
Grommets There are 22, two-part size #0 grommets (11 on each side). They have a medium flange and are spaced equidistantly, and finished in silver.
Laces The laces are black, 3/8 inch flat nylon shoelace. They have a little spring, they’re difficult to snap, they hold bows and knots well, and they are long enough.
Price Available in size 18″ up to 34″.
Price starts at £169.50 GBP ($275 USD) for the classic Vamp in solid satin colors, and price may go up from there depending on what you choose in their “Designer” section.

 

Final Thoughts:

WKD Vamp corset in black satin.

Of all the underbust corsets from What Katie Did, this might just be my favorite. It’s just as curvy as the Morticia underbust, but made to be a more “squat” version so you get all the curve in less of the length. It provides the look and support of a longline corset while still allowing those with a shorter waist (or shorter of stature) to sit down comfortably.

True to WKD aesthetic, it’s quite conical over the ribs, dramatic over the hips, and gives a very flat tummy, making it ideal to wear under retro clothing.

 

I chose the color and overall design of this Vamp corset by submitting my choices in their Corset Designer – for the fashion fabric, I chose a rich, deep aubergine raw dupioni silk, and I requested external boning channels, binding and an external diamond waist tape all made from a pewter / gunmetal (dark silver) floral brocade. You can choose different colors or fabrics for all of these components, or you can choose to not have any contrasting channels or any belt at all (you do need binding, but you can have it match the rest of the corset). Ordering a special design corset automatically makes the corset a WKD Gold Label corset.

Do keep in mind that their “Design your own Corset” section is mainly for colors, fabrics, embellishments and trims for a selection of their standard sized corsets, and it does not give a made-to-measure option. They can make corsets 1 inch longer or 1 inch shorter at the top / bottom edge compared to the base pattern, but this is the extent of the pattern changes they’re able to do.

What Katie Did’s Vamp corset can be found on their website here.

EDIT 2018: What Katie Did has discontinued the Vamp corset and has created an entirely new line of corsets! The probable equivalent of their old Vamp is their new Extreme Morticia Nouveau corset.

Posted on Leave a comment

Interview with Katie Thomas of What Katie Did

In August and September 2015, I attended the Oxford Conference of Corsetry and met Katie Thomas (What Katie Did) in person. I’ve been emailing with Katie for close to 5 years so it was amazing to finally have the opportunity to meet someone you admire in the corset industry face-to-face. Directly following the conference, I spent a few days at Katie’s house and we visited Basilton Park, and Katie gave me a tour of her London Boutique and headquarters.

Skip ahead in the video to hear her answers to the following questions:

0:30 How did you become interested in retro fashion?

0:55 How did you start your business and why did you choose the name What Katie Did?

1:50 After starting your business selling stockings, shapewear, etc, how did you become interested in corsets, and how did you start incorporating corsets into your business?

2:35 You’ve been in this industry for 15 years now, so how have you seen the corset and retro lingerie industry change?

3:10 What do you think of the waist training trend, and how do you think your products fit into this trend?

3:55 Would you say that your corsets are suitable for waist training now?

4:30 You’ve found a niche with higher-end, ready-to-wear corsets that are better quality than the budget OTR corsets, but not quite as high as bespoke corsets offered by independent corsetieres. Was it a deliberate decision to settle your business at this niche?

5:20 You had mentioned that you once considered reducing your prices, but when you were looking for areas to cut, you weren’t willing to make those sacrifices to the quality of your products. Tell us a bit more about that.

6:00 You were the first person I saw in this industry who showed full transparency regarding the working conditions of your factory in India. Can you comment on why you decided to be so transparent about this, and why you decided against manufacturing your corsets in England?

8:00 When I first stumbled upon your site, I thought that you mainly catered to the burlesque and pin-up communities. Do you think this is true? Who is your main client base?

Thanks to Katie for sitting down with me for this interview! Click here to see What Katie Did’s website.

Silk WKD Morticia
WKD Morticia corset in Claret silk, in size 22″, modelled by me (Lucy)

See my many reviews of WKD corsets here:

Link to WKD website is an affiliate link (but links to reviews are not). Affiliate links help support Lucy and keep this site online!