Posted on 2 Comments

Orchard Corset CS-511 Overbust Review

This entry is a summary of the review video “Orchard Corset CS-511 Overbust Review”. If you want visual close-ups, you can watch the video on YouTube here:

Fit, length Center front is 15″, the longest part from peak of the bust to lap is just under 16″.  Gentle sweetheart neckline, and slightly longline in the hips. This is a Level 3 silhouette, which is their curviest silhouette – so the bust is 8″ bigger than the waist, and the hips are about 10-11″ bigger than the waist.
Material 3 main layers – the outer fashion fabric (which may be brocade, satin etc as I have two different types in this review), flatlined to a sturdy cotton interlining, which is then treated as one layer, and also lined in twill.
Construction 6-panel pattern (12 panels total). Constructed with a slightly modified sandwich technique and double boned on the seams, just like the CS-411 and CS-426 style corsets.
Binding Binding at top and bottom are made from commercial black satin bias strips if the corset is made from a heavier brocade, OR made with matching colored satin if the overbust is finished in a satin fashion layer. Binding is machine stitched on both sides. There are also 6 garter tabs, 3 on each side.
Waist tape One-inch-wide waist tape running through the corset, hidden between the layers. I did not check to see if there was glue used in this one (see my CS-426 review if you want to know more about that particular corset).
Modesty panel There is a modesty panel on the back, made of a layer of black satin and a layer of twill if you have a brocade or tartan corset, but if you buy the blue satin CS-511, then it will be in matching blue satin. Panel is 5.5” wide (~4″ usable space) and attached to one side with a line of stitching. The old stock didn’t have a modesty placket by the busk, but the new stock does.
Busk Busk is 1/2″ wide on each side and 13” long, with 6 pins (the bottom two pins are slightly closer together, as is normal). It is fairly sturdy; less bendy than some other 1/2″ busks I’ve had.
Boning 22 bones total in this corset. On each side, 8 of them are spirals about 3/8 inch wide (double boned on the seams, except for between panels 5-6) and then there are two flat steel bones, both ¼” wide sandwiching the grommets.
Grommets There are 24 2-part size #00 grommets (12 on each side), with a small flange, spaced equidistantly. On the underside of the old stock corsets, every grommet is split and quite scratchy. On the new stock corsets, the grommets have rolled smoothly, they don’t tarnish and don’t catch on the laces.
Laces The laces are ¼” wide flat nylon shoe-lace style. I find them to be long enough and quite strong, but also rather springy. However, Orchard has some higher quality laces (in several colours) available on their website – I very much prefer their ribbon laces to the standard shoelace style laces.
Price Currently $79 USD on Orchard Corset’s website.

Final Thoughts:

It was an interesting venture to compare the old stock Orchard Corset pieces to the new stock. Of all the corset companies that I have dealt with, Orchard seems to be the most responsive to the requests of their clientele and eager to improve their designs, which is appreciated. The main changes to the corsets include the satin having matching modesty panels (not just black satin like in the brocade or Tartan pieces), better quality grommets that don’t tarnish or split as much, and the modesty placket by the knob side of the busk. I believe that their prices have dropped over time as well.

If I could choose only one colour or fabric of the CS-511, I would prefer the tartan more than satin – the sturdy and coarse weave of the tartan makes the corset look less wrinkly, and it’s also more resistant to abrasion and pulls, and feels more heavy weight and sturdy. The stripes in the tartan also match up fairly well – all this makes me a bit sad that this style is now on clearance (but that means that it’s only $59 at the moment, and I’m interested to see what new styles Orchard may bring in the future).

This corset also received 4 stars out of 4 on the Bust Test, as the bustline came up high enough on my chest to hold me in during activity. The pattern around the bust is very gently cupped (meaning it comes up and over the breast, not just pushes everything upward but it contains the bust) so I felt comfortable jumping, shrugging my shoulders, raising my arms and leaning over without feeling like I’m going to pop out.

Orchard Corset has graciously provided my viewers and readers with a non-expiring coupon code – enter CORSETLUCY to receive a 10% discount on your purchase. This corset and the other styles I’ve reviewed (including the CS-411 and the CS-426 underbusts) are available on the Orchard Corset website.

Posted on 2 Comments

Corset Connection (Versatile Corsets) Dita Underbust Review

This entry is a summary of the review video “Versatile Corsets Dita underbust Review” which you can watch on YouTube here:

Fit, length Front is about 12 inches long, from underbust to the lap at the “princess seam” (the side-front) is 9 inches long – appropriate for average-to-long torsos. The bottom of the corset swoops down to cover lower-tummy pooch. This is not a longline corset; it’s cut higher over the hips at the side.  Modern slim silhouette, reminiscent of the traditional Victorian hourglass silhouette, except with gentler curves. Also includes a halter strap (see the Final Thoughts for more info). This corset can accommodate about a 9-10 inch hip spring, and the ribs are about 6″ larger than the waist.
Material 2 main layers: the lining is 100% cotton black twill (although custom commissioned corsets from Versatile will contain herringbone coutil lining). Fashion fabric is a medium-weight pink satin (interfaced for strength) with black accent boning channels and binding made from black shiny pleather.
Construction 5 panel pattern. Twill lining is flatlined/rollpinned to satin fashion layer; top-stitching between panels (seams are double-stitched at minimum), external boning channels. Also contains 8 garter tabs.
Binding Black binding that matches the external boning channels, made from bias strips of black PVC, trimmed short on the inside rather than folded under (this is typical of leather/ pleather binding, and fine because it won’t fray).
Waist tape 1″ wide petersham waist tape exposed on the inside. If you had ordered a corset without external boning channels, then the waist tape would be sandwiched between two layers of material.
Modesty panel Attached 8″ wide fabric lacing protector on the back, covered in matching pink satin (more breathable than the PVC or pleather), stitched on one side of the corset; unstiffened placket under busk made from matching black PVC.
Busk Standard flexible busk (1/2″ wide on each side) about 11″ long (5 pins), reinforced with a flat steel bone on each side.
Boning 22 total bones not including busk, all flat (spring) steel bones. On each side they are double boned on the seams (1/4″ wide), 2 sturdier flats sandwiching the grommets and another flat bone beside the busk.
Grommets 24 grommets total, size #00 two-part grommets with moderate flange; set equidistantly, no splits, no wear/fraying/pulling out of grommets. This type of grommet is my personal favourite used in American-made corsets.
Laces 1/8 inch wide round nylon cord – strong, virtually unbreakable, not stretchy, glides well through the grommets and doesn’t catch, but they’re slippery.
Price Currently $358 USD for the standard size and basic fabric on the Versatile website. For contrasting channels, there is no price markup!

Final Thoughts:

This is the third of several corsets I will be reviewing for Versatile Corsets/ Corset Connection. The samples were originally agree to be sent back, but the owner of Corset Connection asked me to sell them here on my website (90% funds still go to Versatile) instead of sending them back.

I don’t often wear materials like pleather or PVC because I find it doesn’t breathe very well – however, since the main fashion fabric is satin and the pleather is just contrast, this style is a bit more comfortable. Still, if I were to go back and order this piece custom, I would likely have chosen a different fabric combination. The perk to Versatile Corsets that I have not seen in any other company – if you want external boning channels, there is no mark-up in price! You can also choose from dozens of fabric and colour choices for the binding, trim, and channels – or make them all different colours or fabrics if that’s your preference. There are many different possibilities!

The thick halter strap was comfortable around my neck; it was covered with black pleather/ PVC material to match the binding and boning channels, and was adjustable with hooks and eyes (similar to bra hooks). I didn’t personally find that the straps pulled too much on my neck, and I was able to keep my shoulders and my neck back – however, for those with forward-head posture looking for a solution, this corset will not miraculously help. I like how the fabric of the corset wraps up and around the side of the torso, which both helps to flatten any breast tissue that wraps around the side and in the armpits, and for those with smaller busts this cut helps to lift the bust and push it together to create cleavage. 

Overall, I am glad I had the opportunity to try on this corset. I find the Dita underbust to be much more suited to my figure, as I have a longer torso. It’s a great corset for lengthening the line of the torso, thanks to the vertical contrasting boning channels, and the swooping line of the lower edge down to the pubic bone. It makes me look much leaner and taller compared to the Snapdragon cincher that I reviewed before – however, those with shorter torsos may prefer the Snapdragon for its length. The one perk is that both the Dita and the Snapdragon corsets are the exact same price, so neither the taller nor the shorter lacer has to worry about paying more for the style that suits them. To see other models in the Dita corset, Versatile has a small gallery so you can see how it fits different people. You can see it on their website here.

Posted on Leave a comment

Corset Connection (Versatile) Snapdragon Underbust Review

This entry is a summary of the review video “Versatile Corsets Snapdragon underbust Review” which you can watch on YouTube here:

[youtube=http://www.youtube.com/watch?v=IUbmt6DSTU8]

Fit, length Front is about 9.5 inches long, center half is 10.5 inches. Slim silhouette. This corset is quite short, just ending at my iliac crest – if you have a longer torso, I recommend the Dita underbust which is a more longline version of this. The top line of this corset comes up around the sides of the bust, which pushes the bust forward and together, and can help flatten any “side muffin top”. The back then scoops back down.
Material 3 main layers: the lining is 100% cotton black American coutil, fashion fabric is a heavyweight purple satin and it has a rose lace overlay. Boning channels are black satin.
Construction 5 panel pattern. Coutil is flatlined/rollpinned to satin and lace layers; top-stitching between panels (seams are double-stitched at minimum), external boning channels. Also contains 8 garter tabs.
Binding Black binding that matches the external boning channels, made from bias strips of black satin.
Waist tape 1″ wide petersham waist tape exposed on the inside.
Modesty panel Attached 7″ wide fabric lacing protector on the back, covered in black satin, stitched on one side of the corset; unstiffened placket under busk.
Busk Standard flexible busk (1/2″ wide on each side) about 8″ long (4 pins), with a flat steel bone on each side.
Boning 22 total steel bones not including busk. On each side, 8 spirals (1/4″ wide) double boned on the seams, 2 flats (1/4″ wide) sandwiching the grommets and another flat bone beside the busk.
Grommets 28 grommets total, size #00 two-part grommets with moderate flange; set equidistantly, no splits, no wear/fraying/pulling out of grommets. This type of grommet is my personal favourite used in American-made corsets.
Laces This particular corset has purple ribbon, about 1/2″ wide 
Price Currently $358 USD for the standard size on the Versatile website.

Final Thoughts:

This is the second of several corsets I will be reviewing for Versatile Corsets/ Corset Connection. The samples will later be returned and sold at great discount.

There are a few things I like about this corset, and a few things I would change if I had the opportunity to get it custom made. Aesthetically I do prefer the more dramatic silhouettes, so if I were to go back and purchase this, I would likely have it made-to-measure, and in a smaller size (the one in the video was a size 26″) so that I could have a bit more curve in the waist (more like the lavender version seen left, instead of some of the other styles seen in their gallery on their product page).

The thick halter strap was comfortable around my neck; it’s made of a smooth-yet-strong matte black satin that can be adjusted with bra hooks. I didn’t personally find that the straps pulled too much on my neck, and I was able to keep my shoulders and my neck back – however, for those with forward-head posture looking for a solution, this corset will not miraculously help. I like how the fabric of the corset wraps up and around the side of the torso, which both helps to flatten any breast tissue that wraps around the side and in the armpits, and for those with smaller busts this cut helps to lift the bust and push it together to create cleavage. 

 The Snapdragon corset is available in various colour combinations as you can choose the main fabric, have a choice of lace overlay if you wish, then choose the type of trim, external boning channels, and binding – they can all be different fabrics if you wish! I’m glad that I had the opportunity to see the differences in construction between the various different corsets depending on the styling choices.

Overall, I am glad I had the opportunity to try on this corset. However I think the Dita underbust is a little more suited to my figure, as I have a longer torso. (I will be reviewing the Dita underbust several weeks from now!) To see other models in the Snapdragon corset, Versatile has a small gallery so you can see how it fits different people. You can see it on their website here.

Posted on 2 Comments

Versatile Corsets Valerian Overbust Review

This entry is a summary of the review video “Versatile Corsets Valerian Overbust Review” which you can watch on YouTube here:

[youtube=http://www.youtube.com/watch?v=MaIGxANFvAY]

Fit, length Front is about 16″ inches long, and full length is 17″ over the bust. Modern Elizabethan or slim silhouette (*although please read the Final Thoughts section). A bit of a longline corset; comes over the hips and includes expandable hip ties. Good for women with an long torso; shorter torso probably not advised to wear this unless you get custom sizing. Will accommodate at least E cups, has a demure neckline and built-in off-the-shoulder adjustable straps that can accommodate broader shoulders. Has a high back that gives no opportunity for muffin top.
Material 3 main layers: the lining is 100% cotton American coutil, fashion fabric is a heavyweight satin that is possibly interfaced (I didn’t take it apart) and it has a tulle/lace overlay.
Construction 5 panel pattern. Unique pattern which gives a very flat front yet accommodates a full hip and bust; almost all the panels are angled in a V-shape towards the bottom front. Coutil is flatlined/rollpinned to satin and tulle; top-stitching between panels (seams are double-stitched at minimum), external boning channels. The seams that contain the hip ties are lock-stitched as it helps the seam lay flat and gives a neater finish. Also has 8 garter tabs.
Binding Black binding that matches the external boning channels, made from bias strips of satin.
Waist tape 1″ wide petershame waist tape exposed on the inside.
Modesty panel Attached 6″ wide fabric lacing protector on the back, covered in the same silver satin and tulle overlay, stitched on one side of the corset; unstiffened placket under busk.
Busk Standard flexible busk (1/2″ wide on each side) about 13″ long (6 pins), with a 3/8″ wide flat steel bone on each side. The rest of the length on top of the busk includes grommets to tie at the bustline.
Boning 22 total steel bones not including busk. On each side, 8 spirals (1/4″ wide) double boned on the seams, 2 flats (1/4″ wide) sandwiching the grommets and another flat bone beside the busk.
Grommets 34 grommets total, size #00 two-part grommets with moderate flange; set equidistantly, no splits, no wear/fraying/pulling out of grommets. This corset has a very long back, hence so many grommets.
Laces Strong nylon cord-style laces; they’re thin, strong and they are long enough but quite slippery.
Price Currently $438 USD for the standard size on the Versatile website (right now they’re having a 20% off sale on all their corsets – enter the coupon code FIREWORKS).

Final Thoughts:

This is the first of several corsets I will be reviewing for Versatile Corsets/ Corset Connection. I was so thrilled to have the opportunity to meet the owner of both sister sites, and she was generous to loan me these samples for review. The samples will later be returned and sold at great discount.

I do notice one difference in the construction of this one compared to the Mimosa (which I had reviewed last year) – the waist tape in the Valerian is exposed. I speculate that this difference is due to the Valerian having external boning channels instead of having the bones sandwiched between multiple layers; whereas my Mimosa overbust has the bones sandwiched between multiple layers. If the tape on the Valerian corset were sandwiched between the coutil and the fashion fabric, it may have left an undesirable outline on the outside of the corset.

Aesthetically I do prefer the more dramatic wasp-waist silhouettes, so if I were to go back and buy this again, I may invest in a smaller size. I was not the right model to show off the curves of this corset effectively because it’s a size 26″, and I could probably fit a size 22″ with the proportions of this standard-size corset. It’s very roomy in the bust and the hip ties can accommodate 6-8 extra inches in the hips. To the left you’ll see this exact same corset on a model who fills it out more appropriately.

 The Valerian corset is available in various color combinations as you can choose the main fabric, have a choice of lace overlay, then trim, external boning channels, and binding. I’m glad that I had the opportunity to see the differences in construction between the various different corsets depending on the styling choices.

Overall, I am glad I had the opportunity to try on this corset. Although I usually prefer Victorian, Edwardian or 50’s wasp-waist styles, this Elizabethan-inspired corset was lovely to try on and the construction was a joy to study. I’m tempted to try other Elizabethan-inspired corsets in the future. To see other models in the Valerian corset, Versatile has a small gallery so you can see how it fits different people. You can see it on their website here.

Posted on 5 Comments

Versatile Corsets Mimosa Overbust Review

This entry is a summary of the review video “Versatile Corsets Mimosa Overbust Review” which you can watch on YouTube here:

[youtube=http://www.youtube.com/watch?v=-MojKXvAwCs]

Fit, length Front is about 13.5″ inches long, modern hourglass or slim silhouette. Not a longline corset; cut above the hips. Good for women with an average length torso. May not cover lower tummy pooch – I’d recommend this corset to women who have a balanced figure on top and bottom, or top-heavy women who would like more bust support.
Material 3 layers (counting the interfacing); fashion layer is satin which is interfaced with medium weight woven fusible interfacing, and the lining is 100% cotton American coutil.
Construction 9 panel pattern (6 on the bodice and forming the bust cup). Top-stitching between panels, boning channels are interestingly sandwiched such that the bones are not visible on the fashion layer. Also has 8 garter tabs.
Binding Matching turquoise binding made from bias strips of satin.
Waist tape 1″ wide invisible waist tape between the interlining and lining.
Modesty panel Attached 7″ wide fabric lacing protector on the back; unstiffened placket under busk.
Busk Standard flexible busk (1/2″ wide on each side) about 12″ long (6 pins), with a 3/8″ wide flat steel bone on each side.
Boning 26 (28 if you include the underwire) steel bones not including busk. On each side, 10 spirals (1/4″ wide) double boned on the seams, 2 flats (1/4″ wide) sandwiching the grommets and another flat bone beside the busk.
Grommets 26 grommets total, size #00 two-part grommets with large flange; set equidistantly, no splits, no wear/fraying/pulling out of grommets
Laces Strong nylon cord-style laces; they’re thin, strong and they are long enough but very slippery.
Price Currently $398 USD for the standard size on the Versatile website (right now they’re having a 25% off sale on all their corsets – enter the coupon code Fall25).

Final Thoughts:

When I first bought this corset and received it in the mail, I wasn’t going crazy for it. As time went on, I found that the more I wore it, the more I liked it. The individual cups are very comfortable – I feel that this is one of the few overbust corsets I own that don’t squeeze my girls into painful little pancakes. When working at my computer, I like to wear this corset because it has a natural silhouette and fit (as opposed to a wasp-waist) and the cups support me like a bra, yet take the weight off my shoulders which further prevents me from hunching over.
Aesthetically I do prefer the more dramatic wasp-waist silhouettes however, so if I were to go back and buy this again, I may invest in the custom size. Although the overall effect is flattering as it is, I feel that it would have been an even better fit if the corset were larger in the ribcage, and had smaller cups (C cups instead of D). This would help support my bust more while preventing muffin top around the back. I also feel that the cups could be placed closer together in the front – perhaps the flat bones on either side of the busk can start lower down, allowing the cups to be pushed closer by about an inch.
The Mimosa corset is also available in various color combinations as you can choose the main fabric, then trim, external boning channels, and binding. I’m actually glad that I didn’t get decorative external boning channels, as this gave me the opportunity to see the unique and clever construction – a style I had never seen before:

Overall, I am happy with this purchase. It’s a totally unique piece in my corset collection, and one of the more comfortable overbusts I own. In retrospect I probably should have purchased this corset in a gold color or other earth-tone so I can wear on more occasions in conjunction with a steampunk outfit, from conventions to Halloween. To see other models in the Mimosa corset, Versatile has a small gallery of women of all shapes and sizes so you can see how it fits different people. You can see it on their website here.

Posted on 7 Comments

Glowing Tardis Corset Case Study

This post is a written summary of the video case study for the Light Atop the Tardis corset I made back in May/June of this year.

[youtube=http://www.youtube.com/watch?v=dMLEmWcKAX0]

This corset was made for a girl attending Dragon*Con this August/September so I had to keep it a secret for several months, until after its debut at the convention. The corset itself is supposed to resemble (as its name suggests) the light on top of the Tardis while her skirt was the main box (which opened to show the impossibly huge interior of the Tardis).

-Details of the Tardis corset…>

Posted on Leave a comment

Black Mesh Corset Case Study

This entry is a summary of the video “Case Study: Homemade Mesh ‘Corset'”. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

[youtube=http://www.youtube.com/watch?v=9dg78g8TYgU]

Fit, length Center front is 11″ high, and I drafted this corset to be very curvy: underbust about 32″, closed waist 23″ and hips 34″. The elastic mesh also contributes to the extreme shape and curviness.
Material Heavyweight powernet (quite stretchy) for most of the panels, and black satin coutil for the first and last panels, the boning channels and the diamond waist tape.
Construction Essentially a 6-panel pattern although the last panel is separated into two to make 7 panels. First, the powernet panels were sewn together wrong sides together and flat-felled with the bulk being on the outside of the body. Then I added the center front coutil panels, with the diamond waist basted in front. The diamond extends into a waist tape, which was basted at each seam, then I secured the external channels down on top of it. The back coutil panel went on last, then I added the busk and bones, and lastly serged the top and bottom edges.
Binding There is no binding on this *yet*. I had serged the raw edges to keep them from fraying. This allows the mesh to stretch. Conventional binding would not allow the top and bottom edges of the corset to stretch. However I may later add an elastic or mesh binding.
Waist tape The diamond detail made from satin coutil extends into a waist tape that is slightly more than 1 inch wide, and placed on the external side of the corset, secured down at the boning channels.
Modesty panel I didn’t make a modesty panel for this corset because I designed it to close completely at the back. There is a small modesty placket in the front by the busk.
Busk A standard flexible busk, 1/2” wide on each side, with 5 pins, 9.5″ long. Although it is quite flexible, having 3 layers of satin coutil surrounding the busk makes the front panel quite sturdy.
Boning 20 bones total in this corset (not including the busk). On each side there are eight 1/4″ wide spirals in external channels, then a 1/2″ wide flat steel on the center back edge of the grommet panel, and a 1/4″ steel on the “inner” side of the grommets.
Grommets There are 26 2-part size #00 grommets (13 on each side). I used self-piercing grommets to insert these, placing the grommets closer together than I normally would and making sure the grommets are snug between the two flat bones. So far they have all held up well.
Laces Some old black cotton shoe-lace style. More lightweight than nylon laces but not as strong. I just used whatever I had lying around.
Price This corset was quite time consuming due to the flat-felled seams and external channels and waistband. Also the powernet and satin coutil were both expensive materials. If I were to remake this corset (with a more pristine finish) it would likely start at no less than $280.

Final thoughts:

This is an extremely comfy corset. I also feel that I’m able to very easily cinch down in this corset – I wish I had drafted it to be another inch or two smaller! The powernet is forgiving of curves and makes my asymmetric hips look symmetric, while giving me absolutely zero pinching or discomfort.

The only disappointments I had with this corset was a) the asymmetry in the diamond detail, and b) the rough finish of the serged edges. I may end up adding binding to this corset (either elastic or mesh) although that would somewhat ruin its ability to be worn inconspicuously under clothing, and I’m not sure how even elastic binding would bring back the dreaded muffin top which is currently so nicely avoided.

Overall I think this experiment turned out much nicer than I had anticipated, and I think I will use this as a sleeping corset in the future! However I do need to practice my “finishing” of corsets, even when they’re experiments or prototypes.

Posted on Leave a comment

Timeless Trends Overbust Corset Review

This entry is a summary of the review video “Timeless Trends Emerald Silk Overbust Corset Review which you can watch on YouTube here:

[youtube=http://www.youtube.com/watch?v=cRxIhzxntbU]

Fit, length Front is about 14 inches high; the highest part (from the apex of the bust) is 15 inches. Gives a gentle hourglass silhouette. Appropriate for average torso length. Includes adjustable hip ties; gives good hipspring (no pinching!). It is slightly longline (well, a little longer over the hip compared to their underbust corsets). I model a size 24L, which has a 24″ closed waist and accommodates cup sizes D-DD. Bust sizes come in Small, Medium and Large for all waist sizes of the overbust corsets.
Material 3 layers; fashion layer is an emerald silk satin and brocade in alternating panels. The lining and interlining are both 100% black cotton twill.
Construction 5 panel pattern. Panels are assembled via lock-stitching and pressing seams open; bones are sandwiched between the interlining and lining. Also has 4 garter tabs.
Binding Emerald satin bias binding machine stitched on both outside and inside.
Waist tape 1″ wide invisible waist tape between the interlining and lining, secured down at boning channels.
Modesty panel Attached 7″ wide fabric lacing protector on the back made of 2 layers of black twill; no placket beneath the busk.
Busk Standard flexible busk (1/2″ wide on each side) about 13″ long (6 pins), Also has a flat steel bone on either side of the busk for reinforcement.
Boning 24 steel bones not including busk. 18 spirals (1/4″ wide) sandwiched between interlining and lining – some on the seams, others in the middle of the panel which help to distribute the tension more evenly than in corsets that are simply double-boned on the seams. 4 flats (3/8″ wide on the inner side, 1/2″ wide on the back edge) sandwiching the grommets, also two 3/8″ flats beside the busk.
Grommets 28 grommets total, size #0 two-part grommets with moderate flange; finished in antique brass; set equidistantly, no wear/fraying/pulling out of grommets
Laces 1/2″ wide single-faced satin ribbon in matching emerald; they grip well and they are definitely long enough. No springiness, and surprisingly strong. The laces at the hips are 1/4″ wide but same colour and quality.
Price Most of their overbust styles start at $150 USD. However do check their clearance section since many of those corsets are up to 25% off!

Final Thoughts:
I adore the fashion fabric of this corset! I had featured my underbust corset in the same emerald silk brocade finish in several of my older videos, and when I bought this overbust I just decided to get the same finish because that particular underbust had been gifted to Jody some months back. (Which proves how much I like Jody, because I probably wouldn’t have parted with that corset otherwise!)
I’m pleased with the construction of corset – I’ve always considered that this brand has one of the best quality/price ratio of standard corsets available today, but the changes they had made to their overbusts compared to their underbust styles were still a definite improvement – these changes include side ties for a better adjustment on the hips; a wider/ stiffer flat steel bone on the center back (which was almost too stiff when first breaking it in, but I suspect it can be bent gently by hand to follow the curve of the back a little better), and alternating the placement of the spirals on the seams and the middle of the panels to better distribute the vertical tension. Timeless Trends was also the first brand I had seen to include small, medium and large bust sizes to the same style corset. (What Katie Did also currently has bust size options for their Laurie and Sophia corsets). The choice of different bust sizes and the hip ties together make this corset a good option for hard-to-fit bodies.
The only thing I wish were different about this corset is the height from the waist to the top edge (as I said in the video, it’s the curse of the long torso!). I’d be so much more comfortable if the top line extended up about two inches and curved over the top of the bust. Overall though, I’m happy with this purchase.

Posted on 1 Comment

Snobz Banquet Overbust Review

This entry is a summary of the review video “Snobz Banquet Overbust Review” which you can watch on YouTube here:

[youtube=http://www.youtube.com/watch?v=vqtqp7XAYCw]

Fit, length Center front is about 16 inches high; the highest part (from the apex of the bust) is 15 inches high. Gives a flattering moderate hourglass silhouette. Appropriate for average or shorter torso length. It is slightly longline with a low dip in the center front bottom edge. I would also recommend this for moderately-busted women (B-C cup).
Material 2 layers; fashion layer is 100% polyester satin, and the lining is polycotton twill.
Construction 5 panel pattern. Internal boning channels also made of twill.
Binding Commerical black satin bias tape machine stitched on both sides; see video for how they bound the top edge.
Waist tape 1″ wide ribbon as exposed waist tape secured under the boning channels.
Modesty panel No modesty panel; one can be ordered for £10. No placket by the busk.
Busk Wide busk (1″ wide on each side) about 15″ long (7 pins), fairly sturdy albeit quite long.
Boning 22 steel bones not including busk. 16 spirals (1/4″ wide) in external channels, 4 flats (1/4″ wide) sandwiching the grommets, also two spirals beside the busk.
Grommets 28 grommets total, size #00 one-part grommets with moderate flange; set equidistantly, no splits, no pulling out of grommets however there is no washer and the grommets are set backwards compared to what I’m used to. I’m not sure yet if this is normal grommet policy for Snobz.
Laces Fine nylon braided shoe-lace style laces; quite thin, they grip well and they are very long, no springiness and quite strong.
Price Plain satin version of this is currently £127 in the UK, or $200 USD

Final Thoughts:
I really love the shape of this corset, and I’m able to achieve a decent reduction in it. For a 5-panel pattern, it gives a beautiful and balanced silhouette – I am so sad that the waist-to-top vertical measurement is just far too short for my torso. Since the website states that the length of the corset was 17 inches, I had expected the entire length to be shifted 3-4 inches higher. On my figure, this Banquet corset is reminiscent of other “1700’s” style neckline overbusts that I’ve tried (including the Antoinette corset by WKD and the Gothic overbust by Corsets-UK), with a further inch cut out of the center front panels which my mother has dubbed (to my horror) the “nipple shelf.” This corset would fit someone who is short waisted, high waisted or smaller busted… or if you are none of the above, strive to wear this over a blouse.

Posted on Leave a comment

Comparison/ Double review! Leatherotics 1811 vs Chinese-made Ebay Corset

This entry is a summary of the review video “Comparison: Leatherotics 1811 vs Budget Ebay Corset” which you can watch on YouTube here:

[youtube=http://www.youtube.com/watch?v=o6HwAenBeVk]

Leatherotics Corset

Chinese Ebay Corset

Fit, length About 12 inches high; very straight busk that does not bow outwards. Gives a very gentle silhouette. Appropriate for average to long torso length. Center front is about 13 inches high; busk bows outwards a bit, giving the appearance of pooch. Gentle silhouette. Slightly longline compared to Leatherotics. Appropriate for average to long torso length.
Material 2 layers; fashion layer is black polyester satin, and the lining is black cotton twill. Only one layer; a red satin that has a kind of sturdy non-stretch backing.
Construction 6 panel pattern, assembled with a lock-stitch. Internal boning channels. Also has 4 garter tabs.  6 panel pattern, assembled with a top-stitch. Internal boning channels. Also has 4 garter tabs.
Binding Matching black satin (made from bias strips of the same fashion material), machine stitched on both sides, finished cleanly.  A close colour match (but not exact) red satin commercially made bias tape, machine stitched on both sides in one go, finishing is not clean.
Waist tape 1″ wide visible waist tape made of satin ribbon, seen on inside, stretching across all panels and secured down at boning channels.  1/2″ wide waist tape made of grosgrain ribbon, seen on inside, stretching across ONLY panels 3-4-5, leaving the other panels unprotected. Secured down at boning channels. One side has the waist tape wrinkled in a seam.
Modesty panel Attached lacing protector on the back made of two layers (black satin and twill); also includes a placket overtop of the busk to hide it.  Attached lacing protector on the back made of one layer (red satin) and lace around it, also includes a placket under the busk.
Busk Standard 1/2″ wide busk on each side, about 10.5″ long (5 pins). Very sturdy. Wide busk (1″ wide on each side) about 11.5″ long (5 pins), however it’s more flimsy than the Leatherotics busk.
Boning 12 steel bones not including busk. 8 spirals (1/4″ wide)  4 flats (1/4″ wide) sandwiching the grommets.  14 steel bones, all spiral steel bones even on the back by the grommets. Bows and collapses when trying to tighten up.
Grommets 28 grommets total, size #00 two-part grommets with small flange; set equidistantly from eachother and between the two bones; no splits, no wear/fraying/pulling out of grommets  20 grommets total, size #00 two-part grommets with small flange; set equidistantly, except offset towards the last bone at the back edge. Starting to pull out around the waist after only 2 wears.
Laces Strong nylon braided shoe-lace style laces  Strong nylon braided shoe-lace style laces
Price Plain satin version of this is currently £40 in the UK, or $60 USD – and they offer custom sizing, more bones, different fabric/ colours.  Plain satin version of this is currently $35 USD on Ebay, no other options for custom sizing, fabric etc.

 

Final Thoughts:
You get what you pay for! If you just want a simple cheap fashion corset without any waist reduction, OR if you’re looking for a cheap corset just take apart in order to learn how to recreate a corset pattern, then the cheaper corset may suit your purposes. However the Leatherotics brand offers custom sizing – this will give you as much or as little curve as you like. But remember the limits of each brand – if you want to be sure you get a corset made exactly to all of your measurements and specifications, you will have to go with an independent corsetier(e).

Posted on 2 Comments

Eternal Spirits “AUDREY” Overbust Corset Review

This entry is a summary of the review video “Eternal Spirits AUDREY Corset Review” which you can watch on YouTube here:

[youtube=http://www.youtube.com/watch?v=WBghVQroJNM]

Fit, length Front is about 14 inches high, with a straight top line. From the waist to the top is 7 inches, which is barely enough to keep everything covered on me – it would be good for short to average torso length. If you order this corset made to measure and talk to the makers at ES, they *may* adjust the vertical measurements. Soft hourglass shape; gives good hipspring (no pinching!). I would not consider this longline. This corset would probably be best suited for cup sizes up to C.
Material 2 layers from what I can tell; fashion layer is mixed fibers, feels like a nylon blend, and is either very thick/strong or is fused to a strength fabric underneath. It has a lovely finish, almost like sharkskin. Lining is pink polyester satin-like fabric.
Construction 11 panel pattern (odd number because of the closed front). The fashion/strength layers were assembled, with double boning channels on each seam; the lining is floating and attached to the outer layers like a pillowcase, then turned right-side out through a 5″ hole in the lining – that hole was then stitched neatly closed.
Binding None, due to the construction method.
Waist tape None that I can feel or see.
Modesty panel Attached 5″ wide fabric lacing protector on the back made of the same blue “sharkskin” and lined in pink satin. It can be removed if desired.
Busk None; closed front.
Boning 24 steel bones. 20 spirals (1/4″ wide), double boned on the seams, 4 flats (1/4″ wide) sandwiching the grommets.
Grommets 22 grommets total, size #00 two-part grommets with moderate flange; set equidistantly, no splits, no wear/fraying/pulling out from the fabric.
Laces Strong double-face satin blue ribbon, 5/8″ wide; difficult to snap and they glide through the grommets smoothly, although I wish that they were longer so I wouldn’t have to remove the laces to put on/ take off the corset.
Price Satin version of this (with front lacing) is currently £210 in the UK, or $335 USD – however I found mine for sale in an online boutique so do check places like Ebay. This corset is also sold by Fairy GothMother (Lulu & Lush)

Final Thoughts:
This is one of my more expensive off-the-rack corsets. I was initially apprehensive about how strong it is and how well it would hold up, due to its lack of waist tape and the few layers of fabric. However this fabric has a strong, dense weave and is deceptively strong, while still giving a soft look. During breaking in, this corset didn’t stretch any more than other corsets. On the day of the banquet, I wore this corset for more than 15 hours, with a 4 inch reduction and it was surprisingly comfortable (although I did open up the top to give more room in the bust). However I would still not recommend ordering this corset more than 2-4 inches smaller than your natural waist. My favourite part about this corset is its unusual construction; I love the fact that it doesn’t have binding and has a completely floating lining.

Posted on 27 Comments

Orchard Corset Maroon Underbust (CS-426) Review

This entry is a summary of the review video “Orchard Corset Maroon Underbust (CS-426) Review”. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

[youtube=http://www.youtube.com/watch?v=Hb2FbrJ03pI]

Fit, length Gives a nice hourglass shape – this is a Level 3 silhouette, gives the most extreme curves. Center front is 13″, shortest part is 10.5″. Longline corset that comes over the hips. Quite comfortable.
Material 3 main layers – the outer satin fashion fabric, flatlined to a sturdy cotton interlining, and lined in twill.
Construction 6-panel pattern (12 panels total). The shape of the panels is very, very similar to the Josephine corset by Isabella Corsetry, although the contours are slightly less, the ribcage and hips a little smaller. Constructed with a slightly modified sandwich technique.
Binding Binding at top and bottom are made from matching maroon satin, double-thickness. I like how it’s very narrow. It’s machine stitched on both sides, folded under nicely on the front and then stitched in the ditch between the corset and the binding, to catch the rest of the binding on the underside.
Waist tape One-inch-wide waist tape running through the corset, hidden between the layers and glued to the lining.
Modesty panel There is a modesty panel on the back, made of a layer of satin and a layer of twill. 5” wide and attached to one side with a line of stitching, reinforced with glue.
Busk Standard busk, half an inch wide and 11” long, and 5 pins. However it’s less bendy than other busks of the same width, which is one perk.
Boning 22 bones total in this corset. On each side, 9 of them are spirals about 3/8 inch wide and then there are two flat steel bones, both ¼” wide sandwiching the grommets.
Grommets There are 24 2-part size #00 grommets (12 on each side). They have a medium lip around. They’re spaced equidistantly about 1” apart. I see some fraying and coming away of the fashion fabric around some of the grommets around the waist. On the underside every grommet is split and quite scratchy, they catch on the laces, the modesty panel and my shirt.
Laces The laces are ¼” wide flat nylon shoe-lace style. I find them to be long enough, a little springy but that’s alright because they’re still strong – you just have to tug a little harder to get the corset to stay closed because of the elasticity of the laces, is all – not a big deal.
Price Currently $95 USD, but you can save 10% by using the coupon code CORSETLUCY

 

Final Thoughts:
I really do like the shape this corset gives; it’s quite curvy (especially for its price). I wish they hadn’t used so much glue in the manufacturing, and that they could spend just a little more on higher quality grommets.

Lastly, one thing that made me PO’d (perhaps not the company’s fault but the shipper’s fault) was that I bought it on sale (around $59) but when it was shipped to me, the value on the package was stated as the original $95 which resulted in my having to pay higher duty/taxes coming into Canada. I ended up paying nearly as much in shipping/duty than I paid for the corset itself! International customers, be aware of this before you buy.

*** EDIT January 2014 – it’s been a couple of years since this review, and a few things have changed. Orchard Corset’s newer stock has higher quality grommets with fewer splits, and they recently introduced all cotton corsets, which are more sturdy than the satin ones and much less prone to coming away at the seams or having the bones pop out. Additionally, the owner of Orchard Corset mentioned that several years ago, they had placed the value of the parcel as product+shipping, which is why the price was so high and I was hit with duty. These days, OC says that they only place the value of the merchandise (the literal price paid for the corset itself) as the value of the parcel, and they don’t include the shipping price, so duty should be much lower for international customers.

Posted on 53 Comments

Isabella Corsetry “Josephine” Underbust Review

This entry is a summary of the review video “Isabella Corsetry Josephine Underbust Review”. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

[youtube=http://www.youtube.com/watch?v=iSzoWX9mIkQ]

Fit, length Dramatic curves, extreme hourglass. This is a longline corset coming over my hips. The center front is 13” high; the shortest part of the corset is 10.5″ hiugh.
Material 3 main layers. The outer fashion fabric is black satin, then there’s a layer of twill as interlining and another layer of black twill as lining.
Construction Made from a 6-panel pattern (so the corset itself is 12 panels total). It looks as though the coutil panels were lock-stitched at the seams, the allowances were pressed open. The layers are joined together by stitching in the ditch between the panels and also by making boning channels. The stitching is perfect on the outside, but the seams are wiggly on the inside. The lining does not float. Bones are sandwiched between the two layers of twill (lining and interlining).
Binding The binding at top and bottom made out of black satin bias tape machine stitched on both sides; it’s small on the outside, then folded under and machine stitched in the ditch, in the seam between the corset and the binding itself, to catch the rest of the binding underneath.
Waist tape 1” wide twill tape between the lining and interlining, invisibly stitched.
Modesty panel There an unboned modesty panel in the back made from two layers of just satin. Slightly over 6” wide.  Easily removable if you want to remove it. No modesty placket on the front.
Busk A heavy duty busk, slightly under 1” wide on each side and 11” long, with 5 pins, it’s EXTREMELY stiff. Keeps the front very straight.
Boning 22 steel bones in this corset not including the busk. On each side there are 9 spirals about 3/8” wide, and they’re mostly double boned at the seams except for at the back between panels 5-6. By the grommets they also use about 3/8” wide flat steels; very sturdy.
Grommets There are 30 2-part size #00 grommets (15 on each side). Black finish to match the rest of the corset, they have a medium lip around and are spaced equidistantly. Functionally they’re very sturdy, no popping or pulling away, whatsoever. On the underside there are no splits – much nicer than the grommets used in Isabella’s Bat cincher.
Laces 1/2” wide black double satin ribbon. They’re very nice, strong, pretty, glide through the grommets nicely and also seem to hold the bow well with little slipping out over time.
Price Currently $175 USD for immediate line. For other fabrics (made-to-order) it’s $250, and for custom fit/fabric it’s $360.

Final Thoughts:
This corset continues to be one of my favourite off-the-rack underbust corsets. It’s comfortable and gives a crazy curvy silhouette – to this day, I think I have gotten more compliments when wearing this corset than with any other off-the-rack corset. It’s relatively affordable compared to other major brands out there. The only con I could say is that Isabella is quickly gaining more and more recognition and thus she’s becoming busier, so wait times have been increasing for her corsets! However, I’m happy that she’s overflowing with commissions; I think her work should be credited. I could definitely see myself commissioning another piece from Isabella in the future.

Posted on 4 Comments

Vollers “Paradise” 1808 Velvet Overbust Review

This entry is a summary of the review video “Vollers 1808 Velvet Overbust Review”. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

[youtube=http://www.youtube.com/watch?v=gL3QspzLQ-w]

Fit, length Center front is 13.5 inches, the apex of bust to the bottom is almost 17 inches. Comes a bit over the upper hipbones, and the bust is deliberately cut high. My bust is secure as the fabric comes up and over much like a bra cup does. Gives very gentle curves, only nips the waist in 2 inches on me.
Material 100% cotton velvet on the outside and a poly-cotton twill on the inside.
Construction 4 main panels. Stitching between panels is topstitched, bones are in internal twill boning channels.
Binding Velvet ribbon, machine stitched on front and back.
Waist tape None. Vollers recommends you order the corset 2-4 inches smaller than your natural waist.*Addendum: This particular style doesn’t come with a waist tape because the velvet has a tendency to stretch, and so the waist tape would eventually cause a ridge that is smaller than the rest of the corset, where the waist tape lays. However this style apparently does come with a waist tape if another fashion fabric is chosen.
Modesty panel Back lacing protector is unstiffened and sewn onto one side of the corset, velvet outside and twill inside. There is a modesty placket underneath the knob side of the busk, made from twill.
Busk Standard flexible busk, 12″ long and ½ inch wide on each side, with 5 pins. There’s another ½ inch wide bone on either side of the busk, sewn invisibly in probably in the seam allowance. This stiffens the front but you can’t see the stitching for it. Additionally, there’s a hook-and-eye hand sewn at the top to prevent the bust area from gaping.
Boning 14 bones total in this corset. There are 8 spiral bones (4 on each side), and 6 flats. Like I said before, there’s a ½ inch wide flat on either side of the busk, and in the back there are ¼ inch wide flats sandwiching the eyelets.
Grommets They don’t use grommets, they use 1-part eyelets. There is no washer on back and the eyelet is perforated to split. Vollers says these eyelets are used in heavy boots so will take quite a bit of stress without pulling out.
Laces about half centimetre wide black flat shoelace style laces which are tightly braided. They’re slippery through the eyelets but the laces grab onto themselves so the bow doesn’t slip out easily. Resistant to catching or fraying.
Price Varies greatly with materials used: £195 ($306 USD) in the velvet finish, £165 ($260) in satin finish, £215 ($338) in sequin fabric.

Final Thoughts:

What to say about this corset? A lot of different parts in this corset I either loved or wished were different, and not much middle ground.

Parts I LOVED

The fit of the bust. It was incredible. This was one of the very few overbust corsets I tried that not only gives a daring plunge in the center but also the cups of the bust comes up and over the breast, holding it firmly in place with almost no chance of popping out. It gave a wicked 1/4 side view. I also loved the neat construction of the busk and supporting “invisible” bones. The hook and eye at the top of the bust was a really nice touch. I also loved the quality of the bones and the laces.

Parts I wished were different

Although I loved the fit of the bust, I wished that there was more contrast in the waist. If I were to order this corset again I would probably have gone for a custom fit so I could achieve a greater waist reduction. On the other hand I’m not entirely certain that the corset would have withstood more tension because there was no waist tape. I wished that there were a waist tape in this so I’d feel safer about achieving greater reductions. And even though the 1-part eyelets stayed put nicely and never frayed for me, I would have just psychologically felt more comfortable with 2-part eyelets or grommets. I have to wonder if the eyelets gripped onto the velvet better than other materials, since it’s more plush. Had I ordered the brocade or satin, would the eyelets have held up as well? I will give them the benefit of the doubt and say that their eyelets should grip any and all fabrics as long as they are set as well as they had been in mine.

A note on corset/ hair compatibility

Although it’s not at all the fault of the makers whatsoever, in retrospect choosing the velvet was a bad idea just because of my hair. Velvet loves my hair and my hair loves it. Therefore whenever I wore this corset with my hair down, my hair would wrap all around me and I would soon become entangled. Therefore I only recommend a velvet garment for someone with shorter hair or one who tends to wear their hair up.

You can find the V1808 corset on the Vollers website here.

Posted on Leave a comment

Axfords C242 Lace Underbust Corset Review

This entry is a summary of the review video “Axfords C242 Corset Review” which you can watch on YouTube here:

[youtube=http://www.youtube.com/watch?v=GNcRcyaSmro]

Fit, length Circumferential measurements are very comfortable; no pinching in the hips or ribcage. Much curvier than I was expecting. This is a longline corset, starting lower on the ribcage and ending low on the hips – center front is 11″.
Material 3 layers: the strength layer is the inside lining – a tightly-weaved white cotton coutil (made especially for Axfords). Coral satin fashion fabric is flatlined to the coutil, and then the white real lace is laid ontop of the satin.
Construction The seams are top-stitched; bones are in internal boning channels at the seams made from twill or Prussian tape.
Binding Satin on one side and grosgrain ribbon on the other side. Quite unique from commercial bias binding used in other corsets. Neatly machine stitched on both sides.
Waist tape None.
Modesty panel Attached 6″ wide protector, not boned but it is stiffened, so it’s flexible but stands on its own. When I’m lacing down it doesn’t need to be adjusted, and it curves nicely with the contours of my spine. Very comfortable. Has a placket overtop of the busk to hide the hardwear.
Busk Heavy busk, 10″ long and one inch wide on each side. Quite a bit stiffer than the standard flexible busk.
Boning 14 bones total. There are 10 hefty spiral bones – they’re 7mm wide instead of 5mm wide. Also four ¼ inch wide spring steel bones which are also very sturdy and quite thick.
Grommets 30 grommets total, size #00 two-part grommets with moderate flange; set equidistantly. Axfords says that they use smaller grommets set closer together for more controlled tightening of the corset. Some splits along the back of the grommets but they do not catch on the laces and are not pulling out.
Laces Strong tightly woven braided shoe-lace style laces; they’re thin, they grip well and they are very long. No stretch or spring to the lace.
Price Currently £125 ($195 USD) for the lace overlay style, but £115 ($180 USD) without the lace.

Final Thoughts:

This corset is adorable, feminine, pretty, shapely… I think this is the girliest underbust I own – pink with floral lace. I’m impressed at how smoothly the delicate lace lays (say that five times fast!) over the pink satin – do I detect some roll-pinning? ;) Even when worn at large reductions, the lace does not pull away from the seams or wrinkle up with stress.

I was initially concerned about the strength fabric as it was said to be coutil but didn’t have a herringbone weave – this was my first experience with a plain-weave coutil – yet it has stood up the test of time, even without a waist tape. The grommets are also still holding up well several months later – I find my preferences now leaning towards more and smaller grommets on my lacing panel as it’s easier to make fine adjustments when lacing up.

The fit of this corset is flattering as well (in my opinion); I like the conical ribcage, and the hip gores make this longline corset very  comfortable over my hips. The shape is quite similar to the Mae Extreme corset by What Katie Did – I am able to cinch down further in this corset than I was able to in the regular Mae.

All of Axfords’ corsets come with a complimentary storage bag as well – of course, don’t buy a corset just for the bag, but only if you think the corset is as lovely as I think it is. You can see this corset in other colors, and other corset styles on their website here.

Posted on 1 Comment

What Katie Did Satin “Tempest” Corset Review

This entry is a summary of the review video “WKD TempestCorset Review” which you can watch on YouTube here:

[youtube=http://www.youtube.com/watch?v=bgIDfP1tzQY]

Fit, length Front is about 14″ inches high; the highest part (from the apex of the bust) is 15 1/4 inches high. Moderate hourglass silhouette. Good for average torso length; not a longline corset. No hip gores, but has ties at the hips to adjust the hip measurement. Bust area fits up to about a small D cup in my opinion.
Material 3 layers; fashion layer is 100% polyester satin, and the lining and interlining are both 100% white cotton twill.
Construction 5 panel pattern, no hip gores. External boning channels, a floating liner (very comfortable). Also has 6 garter tabs.
Binding Peach satin (matched) binding neatly machine stitched on both inside and outside.
Waist tape 1″ wide invisible waist tape between the interlining and lining.
Modesty panel Attached 7″ wide fabric lacing protector on the back made of satin and twill; stiffened placket under busk.
Busk Standard flexible busk (1/2″ wide on each side) about 11″ long (6 pins) and the center front has 2 pairs of grommets at the top to make another almost 3 inches above the busk. The busk is backed with a 1″ wide stiffener on each side.
Boning 14 steel bones not including busk. 10 spirals (1/4″ wide) in external channels, 4 flats (1/4″ wide) sandwiching the grommets.
Grommets 22 grommets total, size #0 two-part grommets with moderate flange; set equidistantly, no splits, no wear/fraying/pulling out of grommets
Laces Strong nylon braided shoe-lace style laces; they’re thick, they grip well and they are long enough. Has some spring to the lace but very difficult to break.
Price Currently $280.50 USD (at the time I reviewed it it was ~ $250) on the What Katie Did website.

Final Thoughts:

If you find that you have a “difficult to fit” body, then consider this style. The adjustable ties at the bust gives your chest a little more “breathing room” while the ties at the hips prevent pinching and allow for different hip springs. By making the proper adjustments at these ties, you’re able to keep the laces at the back nice and parallel and straight (i.e. it will look like || instead of / or / etc.) which is one of the features of a well-fitting corset. Adjusting the ties will also somewhat allow you to go from a lighter cinch with a more hourglass shape, to a stronger cinch with a slightly more wasp-shape. If you find the hip ties a bit too cumbersome or you don’t like the look of it, then check out the Storm overbust as it has gores instead of ties.

To see the different styles of the Tempest corset and their other corsets, please visit the What Katie Did website. I would also like to remind you to check out the ebay boutique from What Katie Did, as they often put used, end of line or “second quality” corsets for sale at huge discounts. For instance, I bought my Sailor Tempest corset from their ebay store for 60% off the original price (about $107 CDN) because it was used once for a photoshoot, even though it was still perfect quality.