Posted on

Scoundrelle’s Keep Sabine Corset Review

This post is a summary of the “Scoundrelle’s Keep Sabine Underbust Corset Review” video, which you can watch on Youtube if you prefer:

Scoundrelle’s Keep Sabine Quick Stats

Fit, length The Sabine is custom fit to the individual wearer, so the measurements will be different for each. In my corset, the center front is 10.5 inches long. The side seam is 7.5 inches, and the center back is 15 inches (not including the adjustable, detachable shoulder harness).  Circumferential measurements: waist is 26 inches, the underbust is 29 inches, and the low hip is about 33 inches.
Material Three layers: fashion fabric is maroon dupioni silk, the strength layer is a thick cotton interlining, and the lining is black black cotton twill.
Construction 5 panel pattern (10 panels total) for the main underbust corset (the harness is 1 panel).
The fashion fabric and strength fabric were flatlined and treated as one. Panels were assembled using a lock-stitch with seams probably pressed open. Double boning channels on the seams, possibly using extra strips of fabric internally or possibly using the seam allowances. The lining is somewhat a floating layer.
Binding Bias strips of fuzzy brushed black, probably knit fabric. Neatly machine stitched on outside, not turned under on the inside (the knit fabric resists fraying). There are also 6 D-rings at the lower edge, probably for garters or attaching other accessories.
Waist tape None detected.
Modesty panel None in back or front. (Be careful not to pinch your skin in the zipper!)
Zipper Heavy duty metal zip, reinforced with 1/4 inch wide flat steel bones on each side. Very strong, 10 inches long.
Boning 22 total bones (11 on each side). They all seem to be 1/4″ wide flat steels, double boned on the seams.
Grommets 34 grommets total, size #00 with a medium flange and finished in silver. Set equidistantly, an inch apart. Typical “US brand” grommets.
Price About $340 USD for the dupioni silk brocade you see in this video. Leather starts at $390.


I loved this corset for the brief time I owned it. Although the fit wasn’t perfect for me (I purchased it from a previous owner with similar – but not identical – measurements), I found it very comfortable to wear while sitting at my desk. It encouraged me to sit with my legs uncrossed and my feet flat on the floor, while keeping my back straight and my shoulders down and back – encouraging proper posture and ergonomics and preventing fatigue while I worked. To boot, the corset’s overall aesthetic is very steampunk and fun!

The harness attaches with 6 adjustable straps which fasten with buckles. If you prefer to wear the corset without the harness, you can remove it. The laces are separate between the underbust corset and the harness so you can adjust the width of them individually (if you happen to have broad shoulders and a smaller waist, or vice-versa). There are enough belt ‘holes’ to allow you to adjust the height of the harness if you happen to have a long torso or high shoulders.

Although there is no waist tape in this corset – and I’m usually apprehensive about using a corset with no waist tape on a daily basis – I felt that the construction of this corset was very hardy (it survived 3 different wearers!) and at the light, 2-inch reduction it gave my waist, it felt sturdy enough to wear regularly while sitting at my desk.

The only reason I sold this corset was because the buyer was desperate to purchase it from me as she needed full posture support as quickly as possible. If not for her request, I would have loved to keep this piece in my collection!

The Sabine corset is available in sizes from 20 up to 38 and beyond, in custom/ made-to-measure sizes. See more at Scoundrelle’s Keep website here! Or see my gallery of other corsets that contain shoulder straps.