Posted on 27 Comments

Orchard Corset Maroon Underbust (CS-426) Review

This entry is a summary of the review video “Orchard Corset Maroon Underbust (CS-426) Review”. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

Fit, length Gives a nice hourglass shape – this is a Level 3 silhouette, gives the most extreme curves. Center front is 13″, shortest part is 10.5″. Longline corset that comes over the hips. Quite comfortable.
Material 3 main layers – the outer satin fashion fabric, flatlined to a sturdy cotton interlining, and lined in twill.
Construction 6-panel pattern (12 panels total). The shape of the panels is very, very similar to the Josephine corset by Isabella Corsetry, although the contours are slightly less, the ribcage and hips a little smaller. Constructed with a slightly modified sandwich technique.
Binding Binding at top and bottom are made from matching maroon satin, double-thickness. I like how it’s very narrow. It’s machine stitched on both sides, folded under nicely on the front and then stitched in the ditch between the corset and the binding, to catch the rest of the binding on the underside.
Waist tape One-inch-wide waist tape running through the corset, hidden between the layers and glued to the lining.
Modesty panel There is a modesty panel on the back, made of a layer of satin and a layer of twill. 5” wide and attached to one side with a line of stitching, reinforced with glue.
Busk Standard busk, half an inch wide and 11” long, and 5 pins. However it’s less bendy than other busks of the same width, which is one perk.
Boning 22 bones total in this corset. On each side, 9 of them are spirals about 3/8 inch wide and then there are two flat steel bones, both ¼” wide sandwiching the grommets.
Grommets There are 24 2-part size #00 grommets (12 on each side). They have a medium lip around. They’re spaced equidistantly about 1” apart. I see some fraying and coming away of the fashion fabric around some of the grommets around the waist. On the underside every grommet is split and quite scratchy, they catch on the laces, the modesty panel and my shirt.
Laces The laces are ¼” wide flat nylon shoe-lace style. I find them to be long enough, a little springy but that’s alright because they’re still strong – you just have to tug a little harder to get the corset to stay closed because of the elasticity of the laces, is all – not a big deal.
Price Currently $95 USD, but you can save 10% by using the coupon code CORSETLUCY

 

Final Thoughts:
I really do like the shape this corset gives; it’s quite curvy (especially for its price). I wish they hadn’t used so much glue in the manufacturing, and that they could spend just a little more on higher quality grommets.

Lastly, one thing that made me PO’d (perhaps not the company’s fault but the shipper’s fault) was that I bought it on sale (around $59) but when it was shipped to me, the value on the package was stated as the original $95 which resulted in my having to pay higher duty/taxes coming into Canada. I ended up paying nearly as much in shipping/duty than I paid for the corset itself! International customers, be aware of this before you buy.

*** EDIT January 2014 – it’s been a couple of years since this review, and a few things have changed. Orchard Corset’s newer stock has higher quality grommets with fewer splits, and they recently introduced all cotton corsets, which are more sturdy than the satin ones and much less prone to coming away at the seams or having the bones pop out. Additionally, the owner of Orchard Corset mentioned that several years ago, they had placed the value of the parcel as product+shipping, which is why the price was so high and I was hit with duty. These days, OC says that they only place the value of the merchandise (the literal price paid for the corset itself) as the value of the parcel, and they don’t include the shipping price, so duty should be much lower for international customers.

Posted on Leave a comment

“Wrinkly Pig” Corset Case Study

This entry is a summary of the review video “Wrinkly Pig” Corset Case Study”. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

***

Note: the following are the differences between the “Wrinkly Pig” and the “Tickled Pink” corset in terms of construction:

  Wrinkly Pig Tickled Pink
Fusing Fused the brocade to a layer of woven fusible interfacing, then flatlined that to coutil. Fused the brocade directly to a layer of coutil using “Heat n’ Bond” (fiddly sheet of glue, I don’t recommend it).
Roll-pinning Everything was flat-pinned, not roll-pinned. Some roll-pinning was done on the side panels.
Seams Lock-stitched seams; allowances were not trimmed or clipped at curves. Seams were trimmed and flat-felled.
Boning channels Double-boned at the seams, sandwiched between two layers of coutil. Single boned at the seams, used external boning channels (cuts down on wrinkles slightly)

***

And here is my review:

Fit, length Decent curves. Used to be a slightly long-line corset but I later shortened the hips so it is more of a cincher now. Center front is about 11″ long.
Material 4 layers including the interfacing: brocade fashion fabric fused to interfacing, then flatlined to interlining of coutil and another lining of coutil.
Construction 6-panel pattern. Seams were lock-stitched (stitched twice) at the seams, the allowances were pressed open. The brocade/interfacing/coutil flatlined panels were all assembled, then the coutil lining was assembled. The layers were then stitched together at first/last panels, flipped right-side out and stitched in the ditch between panels and also secured at boning channels.  Bones are sandwiched between the two layers of coutil.
Binding The binding at top and bottom are made out of commercial hot pink cotton bias tape, machine stitched on both sides.
Waist tape 1” wide twill tape between the coutil lining and interlining, stitched invisibly so it’s not noticeable.
Modesty panel Suspended modesty panel made from brocade fused to twill, and stiffened with plastic canvas. 7″ wide.
Busk A standard flexible busk, 1/2” wide on each side, with 5 pins, 9.5″ long.
Boning 22 steel bones in this corset not including the busk. The seams between the panels are double-boned (except the seam closest to the grommets with ¼” inch wide spirals, and there are a pair of flats sandwiching each column of grommets.
Grommets There are 30 2-part size #X00 eyelets (15 on each side). They have a medium flange around and are spaced out 3/4 inches apart. No pulling away of fabric yet but they are very small so many types of fat cord is hard to thread through.
Laces 1/2″ wide double-face satin ribbon, baby pink in colour. About 5 meters and not really long enough for my tastes. I think I may change out the laces for some longer ones.
Price If I were to re-make this corset, I would roll-pin the panels and also use wonder-under or stitch-witchery to directly fuse the brocade to a layer of coutil to eliminate wrinkling. Keeping other construction techniques the same, I would likely charge around $260 USD for a corset like this.
Posted on 1 Comment

CorsetDeal Silver/Black Gothic Overbust Review

This entry is a summary of the review video “CorsetDeal/Corsets-UK Gothic Overbust Review”. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

Fit, length Gently curved, gives a slim silhouette without a lot of cinch. The center front is 14”. From the apex of the bust to the bottom is not quite 15″, and the longest part (the side, where the hips peak) is 15.5″. Good coverage in the bust.
Material Two layers; the outside has alternating panels of smocked shiny black PVC and flocked black and silver floral polyester brocade. The inside cotton twill.
Construction 6 panel pattern. Panels are top-stitched at the seams, with seam allowances always pressed toward the brocade side. Internal boning channels laid down made of black twill.
Binding The binding at top and bottom are black shiny PVC. Also has 6 garter tabs.
Waist tape Waist tape running through the corset, seen on the inside, made of 1” wide single-faced satin ribbon.
Modesty panel Unboned modesty panel, 7.5 inches wide made from silver/black brocade on the outside and black twill on the underside. Also has a 3″ wide placket beneath the front closure, made from PVC on the outside and twill on the underside.
Swing Hooks 5 large silver swing hooks riveted to half-inch-wide bones in the center front. The bones in front are 12.5″ long. Very strong, no sign of breaking or falling out. I like that there were 5 swing hooks used – the extra hook a the waist prevents bowing of the bones in this area.
Boning 14 steel bones in this corset not including the busk. Single boned on the seams. The two bones that curve over the bust are made of spiral steel; all the other bones in this corset are spring steel.
Grommets There are 24, 2-part size #0 grommets (12 on each side), finished in nickel. The grommets are sturdy with moderate size lip around, there is absolutely no fraying around the material, they’re not pulling out.
Laces Black flat nylon braided shoe-lace style. Very strong, grips fairly well. It has a little bit of spring. They are resistant to fraying and catching.
Price Currently around $164 USD or £105 GBP.

 

Final Thoughts:
This is such a fun corset. If I ever had tea at H.R. Giger’s house, this is probably what I would wear. It’s an interesting combination of elegance and edginess.
Of all the overbusts I’ve reviewed made by CorsetDeal/Corsets-UK/Punk69, this is the one that fit me the best. It’s also the corset that I was most impressed with in regards to workmanship/stitching – I know from personal experience that PVC is not easy to work with! I might have kept it in my collection if I had any place or reason to wear it, but unfortunately it’s not a style I often wear, and I don’t go out that often. This corset would be great for clubbing/performances, and for attracting some attention when going out on the town.

For those interested in trying a corset from CorsetDeal, I’ve found a coupon for 20% off anything on the CorsetDeal site here (aff link).

Posted on 8 Comments

Gallery Serpentine Victorian Underbust Review

This entry is a summary of the review video “Gallery Serpentine Victorian Underbust Review”. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

Fit, length Victorian Hourglass shape, nice moderate curves. Center front is 13”. Stops just at the upper hips, it is not longline. One “pro” is the unique feature of how low the corset stops on the back, it curves nicely over the top of the bum instead of cutting into it. One “con” is how distended my torso looks in profile.
Material 3 main layers – the outer satin, a thick cotton non-woven interfacting as interlining, and black twill lining.
Construction Made from a 4-panel pattern. The satin and the heavy interlining are either flat-felled or fused together (depending on whether the interfacing was fusible or not), then those panels are topstitched at the seams. Bones are placed either in the seam allowances between the panels, or internal channels are made with twill tape.
Binding Binding at top and bottom are made from black satin bias tape. Folded under nicely on the outside; on the inside the raw edge is serged to prevent fraying and just stitched down flat.
Waist tape None.
Modesty panel None. To get a modesty panel costs another $15 from the website.
Busk Standard busk (flexible), half an inch wide and 12” long, and 6 pins.
Boning 12 bones total in this corset, 6 on each side. All of them are plastic. These are heavier-duty polypropeline bones but I would still prefer steel. To get the steel bone upgrade costs another $15 from the website.
Grommets There are 18 2-part size #0 grommets (9 on each side) and have a medium flange. They’re spaced 1.5” apart on the top and bottom and are spaced closer together (1” apart) at the waist for better cinching control. Grommets are very sturdy, no popping out, no fraying. However I would have preferred to have 10 more grommets because lacing down is difficult on the top and bottom. On the underside there are no splits; they’re nicely set.
Laces The laces I received with this corset are reportedly not the original laces. The laces I got are 1/4″ wide single faced satin ribbon, quite slippery and difficult to grip. The laces that I have read now come with the corset are black shoelace-style laces.
Price Currently $190 (AUD) for basic fabric and standard sizes. $210 for made-to-measure, and add $10 more for Asian brocade fabrics. Note that steel bones/modesty panel also cost extra.

Final Thoughts:
This… was not my favourite style. A lot of people noticed that my review was blasé. Perhaps my review would have been more fair if I had spent some extra funds to get a made-to-measure item with steel bones, but for financial reasons and accessibility, this was the right option at the time. I doubt I would buy from them again, but I guess I should never say never. Many of their happier customers have contacted me to say that their corsets are much more flattering, better constructed and include things like a modesty panel, so perhaps there are several makers for that company and there are inconsistencies between their products. I will give them the benefit of the doubt, however this one simply did not go well with my body type and looked unflattering on me. I ended up altering this corset by adding steel bones and a modesty panel.

Posted on 53 Comments

Isabella Corsetry “Josephine” Underbust Review

This entry is a summary of the review video “Isabella Corsetry Josephine Underbust Review”. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

Fit, length Dramatic curves, extreme hourglass. This is a longline corset coming over my hips. The center front is 13” high; the shortest part of the corset is 10.5″ hiugh.
Material 3 main layers. The outer fashion fabric is black satin, then there’s a layer of twill as interlining and another layer of black twill as lining.
Construction Made from a 6-panel pattern (so the corset itself is 12 panels total). It looks as though the coutil panels were lock-stitched at the seams, the allowances were pressed open. The layers are joined together by stitching in the ditch between the panels and also by making boning channels. The stitching is perfect on the outside, but the seams are wiggly on the inside. The lining does not float. Bones are sandwiched between the two layers of twill (lining and interlining).
Binding The binding at top and bottom made out of black satin bias tape machine stitched on both sides; it’s small on the outside, then folded under and machine stitched in the ditch, in the seam between the corset and the binding itself, to catch the rest of the binding underneath.
Waist tape 1” wide twill tape between the lining and interlining, invisibly stitched.
Modesty panel There an unboned modesty panel in the back made from two layers of just satin. Slightly over 6” wide.  Easily removable if you want to remove it. No modesty placket on the front.
Busk A heavy duty busk, slightly under 1” wide on each side and 11” long, with 5 pins, it’s EXTREMELY stiff. Keeps the front very straight.
Boning 22 steel bones in this corset not including the busk. On each side there are 9 spirals about 3/8” wide, and they’re mostly double boned at the seams except for at the back between panels 5-6. By the grommets they also use about 3/8” wide flat steels; very sturdy.
Grommets There are 30 2-part size #00 grommets (15 on each side). Black finish to match the rest of the corset, they have a medium lip around and are spaced equidistantly. Functionally they’re very sturdy, no popping or pulling away, whatsoever. On the underside there are no splits – much nicer than the grommets used in Isabella’s Bat cincher.
Laces 1/2” wide black double satin ribbon. They’re very nice, strong, pretty, glide through the grommets nicely and also seem to hold the bow well with little slipping out over time.
Price Currently $175 USD for immediate line. For other fabrics (made-to-order) it’s $250, and for custom fit/fabric it’s $360.

Final Thoughts:
This corset continues to be one of my favourite off-the-rack underbust corsets. It’s comfortable and gives a crazy curvy silhouette – to this day, I think I have gotten more compliments when wearing this corset than with any other off-the-rack corset. It’s relatively affordable compared to other major brands out there. The only con I could say is that Isabella is quickly gaining more and more recognition and thus she’s becoming busier, so wait times have been increasing for her corsets! However, I’m happy that she’s overflowing with commissions; I think her work should be credited. I could definitely see myself commissioning another piece from Isabella in the future.

Posted on 19 Comments

Heavenly Corsets Wasp-Waist Training Underbust Review

This entry is a summary of the review video “Heavenly Corsets “Wasp-Waist” Training Underbust Review”. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

***

Note: the following are the differences between the “standard” wasp-waist corset and the “training” wasp-waist corset:

  Training Corset Standard Corset
Materials Always made in coutil, with an inner layer of twill, and a cotton lining layer Either a layer of outer fabric (unless coutil) with an inner layer of twill and cotton lining layer OR if you chose coutil, a single layer of coutil and a cotton lining layer
Boning double boning throughout 6 fewer bones than the trainer
Busk wide solid steel busk standard steel busk
Modesty Panel included NOT included
Seams triple-stitched seams double-stitched seams

***

And here is my review:

Fit, length Dramatic curves, “wasp-waisted”. This is a longline corset coming over my hips. The center front is 12” high. Measurements (both circumference and vertical) were taken to fit my body; quite comfortable with no pinching. One issue with the bones in the back bowing outwards and twisting so creates a gap at the waistline.
Material 3 main layers. The outer fashion fabric is red satin coutil, twill interlining and lightweight cotton lining inside.
Construction 6-panel pattern. It looks as though the coutil panels were lock-stitched (stitched twice) at the seams, the allowances were pressed open and zigzag stitched again. (Some people may not find this aesthetic but if it makes for a strong corset then I don’t mind.) Bones are sandwiched between the satin coutil and the twill, and the cotton lining is primarily floating.
Binding The binding at top and bottom are made out of commercial red satin bias tape machine stitched on both sides; it’s folded under and stitched in the front and then topstitched to catch the back.
Waist tape 1” wide twill tape between the lining and the twill interlining. Stitched down horizontally across all the panels of the lining (so is not invisible but still cannot be felt).
Modesty panel Unboned modesty panel, 4.5 inches wide made from satin coul on the outside and lightweight cotton on the underside. No placket beneath the busk. (I would have preferred a slightly wider panel.)
Busk A heavy duty busk, 1” wide on each side, with 5 pins, it’s quite stiff and it’s 11” long.
Boning 22 steel bones in this corset not including the center front, ALL flat bones. The seams between the panels are double-boned (except the seam closest to the busk) with 3/8 inch wide flats (slightly wider than ¼”), but on the outer edge of the grommets in the back those bones are ½” wide flats.
Grommets There are 20 2-part size #00 eyelets (10 on each side). They have a medium flange around and are spaced out 1¼ inches apart. I would prefer for them to be spaced closer together and there be more of them, but functionally they’re sound; no pulling away or fraying of the fabric. On the underside there are no splits.
Laces  ¼” wide flat braided cotton laces, NOT nylon. They’re easy to pull and they grip well, not much wear so far. Cotton laces are sometimes prone to snapping so should be replaced more often, however I’ve had this corset for about 9 months and haven’t had to change the laces yet.
Price Currently £160 ($250) for the 23/7 waist training wasp-waist corset, or £120 ($185) for the non-training wasp-waist corset.

Final Thoughts:

I received a mixed reaction from this review. A few previous customers of Elle came forward and told me that they didn’t like certain aspects about this style of corset, such as a wobbly stitch line here or there, or the fact that she uses all spring steel bones. I put all this into perspective. Back in 2012, I hadn’t found a more affordable 23/7 training piece, and the materials used (including English coutil) are quite high quality. From what I can see, the primary stitch lines (the straight ones, holding the panels together) are straight and even, and although the zig-zag stitching (which is technically the 3rd stitch on each panel) does veer a bit and is not aesthetically pleasring, it still serves its purpose – to further reinforce the panels together. At that point in the construction process, it has no effect on the overall shape or measurement of the corset.

This did not come as a surprise to me, because I asked Elle a thousand questions before I ordered (and she was quite patient with me every time). The purpose of this corset (for me) wasn’t meant to be pretty or be shown off on a regular basis, it was meant to be strong.

Edit December 2014:

It’s been about 4 years since I ordered this corset, and nearly 3 years since the review – truthfully, I had forgotten about this corset review until recent events brought it back to my attention.
How did my corset hold up? The seams remained strong and none of the bones wore through their channels, but the very flexible bones in the back by the grommets became annoying, so I ended up switching them out for stronger (but more narrow) 5.5mm steels from Vena Cava. I also added more grommets between the pre-existing ones in the back of the corset for better control (the size #00 self-piercing grommets that fit the C-Step 2 machine are a decent match), and changed the lacing style. This was the only issue I experienced with my corset. However, other clients of Elle have had different experiences than myself, and I encourage you to read some of the comments below so you can gain a balanced view before deciding.

Posted on 7 Comments

Isabella Corsetry “Bat Cincher” Review

This entry is a summary of the review video “Isabella Corsetry Bat Cincher Review”. If you would like more complete information, detailed close-ups and side notes about the corset, you can watch the video on YouTube here:

Fit, length Dramatic curves, I would say “wasp-waisted”. This corset starts lower down on the ribcage on me so I have room to move and to breathe, yet this is a longline corset coming over my hips. The center front is 11.5” high.
Material 3 main layers. The fashion fabric is a custom-printed cotton which is interfaced. There’s a twill interlining and another layer of black twill for the lining.
Construction 4 panel pattern. This constructed in what seems to be the sandwich method; each layer was assembled individually and then the layers were stitched, wrong sides together, at the seam of each panel. Bones are inserted between the two layers of twill (being the lining and interlining).
Binding The binding at top and bottom are made of lime green satin bias tape. Each curve between the peaks of the “bat” shape are individually bound. It’s stitched neatly on the outside, and then just folded down and machine stitched again in the “ditch” of the first stitching.
Waist tape 1-inch-wide waist tape running through the corset between the layers (inserted invisibly).
Modesty panel None.
Busk A heavy duty busk with 5 pins, it’s quite stiff and 1” wide on each side. 11″ long.
Boning 16 steel bones not including the busk. The seams between the panels are all double-boned with ¼ inch wide spirals, and then 3/16 inch wide sturdy flats on each side of the grommets.
Grommets There are 26, 2-part size #00 grommets (13 on each side). I’m very impressed at how well the grommets have held up. None of them show any sign of pulling out whatsoever, despite the fact that every one is split along the back.
Laces Came with ½” wide ivory double-faced satin ribbon which has held up remarkably well.
Price Bat cincher available as “made to order” for $225. If you want custom fit, the closest other corset is the “Vamp” at $350.

Final Thoughts:
This corset is cute as a button. I adore the crazy fabric print (although that is to be credited to the original person who commissioned this corset) and the cut of this corset is crazy curvy. I’m still impressed by how curvy Isabella managed to make this with just four panels per side. I did have issues with this corset, like a wobbly binding seam here or there, and the split, small grommets, and admittedly the flesh over my ribcage did give a “muffin top” over the top edge (that may have been because it was made to another girl’s measurements and not mine) – however, when comparing this corset to the Josephine, there is a great difference! I know that the Bat cincher is a couple of years older than my Josephine corset, so I have the unique opportunity to see how the workmanship of a corsetiere has changed and improved in a short time. This is why I don’t want to say “never” in terms of ordering twice from a (fairly reputable) company. If I have reason to believe that their work has improved, I will sometimes give them the benefit of the doubt even when my previous experience wassn’t 100% positive or as expected.

Posted on 5 Comments

CorsetDeal Longline Pinstripe Overbust Review

This entry is a summary of the review video “Longline Overbust Review (CorsetDeal/Corsets-UK)”. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

Fit, length Gently curved, gives a slim silhouette without a lot of cinch. The center front is 15.5”. The longest part of the corset at the apex of the bust is 18”. Sweetheart neckline. Longline corset, ending low over the hips.
Material Two layers; the outside heavy polyester pinstripe fabric, and the inside cotton twill.
Construction 6 panel pattern. Panels are top-stitched at the seams, and then internal boning channels laid down, made of black twill.
Binding The binding at top and bottom are black polyester bias tape. Also has 6 garter tabs
Waist tape Waist tape running through the corset, seen on the inside, made of 1” wide single-faced satin ribbon.
Modesty panel Unboned modesty panel, 8 inches wide made from polyester pinstripe on the outside and black twill on the underside. No placket beneath the busk.
Busk Slightly heavy duty, almost 1″ on each side. Stiffer than a standard flexible busk. 14″ long with 6 pins.
Boning 14 steel bones in this corset not including the busk. Single boned on the seams. The two bones that curve over the bust are made of spiral steel; all the other bones in this corset are spring steel.
Grommets There are 32, 2-part size #0 grommets (16 on each side), finished in nickel. The grommets are sturdy with moderate size lip around, there is absolutely no fraying around the material, they’re not pulling out.
Laces Black flat nylon braided shoe-lace style. Very strong, grips fairly well. It has a little bit of spring. They are resistant to fraying and catching.
Price Currently ranges from $40 USD – 85 USD (£25 to £54 in UK).

 

Final Thoughts:

After experiencing the unflattering way the shorter Corsetdeal overbusts barely covered my girls, I opted for a longline style instead. This was a slightly better fit. I definitely felt that my bust was more secure, and the position of the waist tape was in a more reasonable place, although still not right at my waistline (it was sitting perhaps an inch above my natural waist).

The pattern for the overbust corsets have the same bust/waist/hip circumference as the pattern for the regular overbusts, so keep this in mind. It’s as if they took the original pattern and simply stretched it out vertically to elongate it (i.e. what they did not do, was theoretically take the original pattern and extrapolate the lines to longer [and wider] top and bottom edges). I hope at explanation made sense – if not I will draw a diagram for you all. How this translated to fit on me, is that it fixed the flaring issues that I had at the hips in my shorter overbust corsets, but it resulted in the appearance of a less curvy corset overall. Therefore I recommend this corset to buyers who are tall/ have a long torso, and are either slim/ruler shaped, or slightly apple shaped. If you are a pear or natural hourglass shape, there is a possibility that this corset may not be curvy enough for you.

I didn’t have any problems on my hipbones here in terms of the pattern itself, although the placement of the internal bones at the side seams was unfortunate, as the rigid spring steel bones sat right over a nerve on my iliac crest, causing some chafing and discomfort. The problem was partially resolved by simply replacing the flat bones on the sides with more flexible spiral steel boning, which was a surprisingly easy operation.

For those interested in trying a corset from CorsetDeal, I’ve found a coupon for 20% off anything on the CorsetDeal site here (aff link).

Posted on 1 Comment

CorsetDeal Steampunk Overbust Review

This entry is a summary of the review video “CorsetDeal Steampunk Overbust Corset Review”. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

Fit, length Gently curved, gives a slim silhouette without a lot of cinch. The center front is 14”. The longest part of the corset at the apex of the bust is 14.5” so it’s a VERY gentle sweetheart neckline, barely any difference in height from center front to top of bust. Fits like a demi-bust on me and not a longline corset.
Material Two layers; the outside heavy polyester brocade and the inside cotton twill. The binding and decorative external channels are faux leather.
Construction 6 panel pattern. Panels are top-stitched at the seams, and then internal boning channels laid down, made of black twill. The external faux-leather boning channels are simply decorative and have no bones. The buttons and chains on the side are finished in Antique Brass and they’re set into grommets which means that it shouldn’t fall off like other sewn-on buttons do.
Binding The binding at top and bottom are faux leather. Folded under on the front, but on the inside it’s just stitched down and the raw edge is visible. This is typical of leather or PVC type binding as it reduces bulk. Will not fray.
Waist tape Waist tape running through the corset, seen on the inside, made of 1” wide single-faced satin ribbon.
Modesty panel Unboned modesty panel, 7 inches wide made from brocade on the outside and black twill on the underside. There is also a 2 inch wide unboned placket under the front fastener, made from the same fabrics.
Front Closure (Swing hooks) NO BUSK!  There is a flat bone 3/8” wide on either side of the opening in the center front, where these large swing hooks were fastened. I believe that they could have added 1 more set of hooks in the front and spaced them closer together, as I’m noticing that the bones at the waistline are wanting to bow out slightly. For this reason (and because of the mild curves of the corset) I recommend getting this corset only 2-4 inches smaller than your natural waist even if you are able to cinch down more than that.
Boning 14 steel bones in this corset not including the center front. Single boned on the seams. The two bones that curve over the bust are made of spiral steel; all the other bones in this corset are spring steel.
Grommets There are 24, 2-part size #0 grommets (12 on each side), finished in antique brass. The grommets are sturdy with moderate size lip around, there is absolutely no fraying around the material, they’re not pulling out like a couple of them were in the taffeta corset.
Laces Brown flat nylon braided shoe-lace style. Very strong, grips fairly well. I find it nice that all the colours in this corset blend well together.
Price Currently £105 in the UK ($165 in the USA).

Final Thoughts:

This was the first style I had seen of the 2012 collection from Corsets-UK/ CorsetDeal, and I was floored. After so many years of the same classic (tired) designs, at last this was something cool, fun, affordable and usable for more situations than just “burlesque dress up” like their frillier options. And in many ways, it was fun and cool – I loved the rich chocolatey brocade, the faux leather trim and casings, the various chains and other hardware… but it was also a bit dangerous on the top edge. I’m wondering if the models the company used on the site was short-waisted (or just short stature) because wow, the corset was kind of low cut on me, and the waist tape was several inches higher than my natural waist. I’ve now seen this corset on other customers; they’re of smaller frame than I am and it looks incredible on them.

This was the first corset I owned that had the swing hooks. My goodness, I love those swing hooks! However I wish that there were 5 of them instead of just 4. I was sort of beginning to see the center front edge beginning to bow out (it could just be the fabric and not the bones) and felt that could have been avoided if the hooks were placed closer together and an additional one were added right at the waist where there was most tension.

As for any actual cinch in this corset, I didn’t experience much. Yes the corset does take me in a few inches on the inside of the corset, but this corset is so heavy and bulky that I don’t really look cinched at all on the outside – so keep this in mind when ordering. This corset is primarily for a fun addition to an outfit, and not suitable for tightlacing or waist training. This style of corset also has about an 8 inch difference between bust and waist – for example, on that 24″ corset, the bust measurement was 32″.

Update: For those interested in trying a corset from CorsetDeal, I’ve found a coupon for 20% off anything on the CorsetDeal site here (aff link).

Posted on Leave a comment

Corsets-UK Overbust “Waist Training” Corset Review

This entry is a summary of the review video “Corsets-UK ‘Waist Training’ Overbust Review”. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

Fit, length Gently curved. The center front is 14”. The longest part of the corset at the apex of the bust is a little over 15”. Very straight back, I wouldn’t recommend this for people with swayback.
Material Two MAIN layers, the outer red taffeta and inner black twill, but both have fusible interfacing on the inside.
Construction 6 panel pattern. The seams appear to be lock-stitched, NOT top stitched. The bones are sandwiched between the layers of fabric. The lining is attached to the other layers by stitching in the ditch.
Binding Binding at top and bottom are black taffeta. I would have preferred binding in red to match the rest of the corset. Machine stitched on both sides.
Waist tape One-inch-wide waist tape running through the corset, hidden between the layers.
Modesty panel Unboned modesty panel in the back made from red taffeta on the outside and black twill on the underside. There’s no placket under the busk.
Busk Heavy duty busk, a little less than 1” wide on each side. It’s 12.5” long with 6 pins.
Boning 24 steel bones in this corset. Double-boned on the seams, there are 10 ¼” wide spiral steels on each side, and then sandwiching the grommets are 2 spring steel bones each about 7mm wide.
Grommets There are 24, 2-part size #0 grommets (12 on each side). The grommets are sturdy with moderate size lip around and no obvious splits on the underside. There is some pulling away of the fabric from the grommets at the waist (around the “bunny ears”).
Laces Round braided nylon cords, NOT flat laces as one sees in other brands of corsets. They glide smoothly through the grommets but I find that they don’t grip well, meaning my corset tends to loosen over time. It’s extremely strong, hard to break, but I would rather replace the laces.
Price Currently £72 in the UK ($114 USD).

 

Final Thoughts

I actually ordered this corset a long time before I finally actually got around to reviewing it. This doesn’t mean that I wore it a lot, though. It was a lovely little piece and I liked how smooth the satin was around my body – prior to this corset, I experienced satin wrinkling up from stress on the corset, particularly at the waist, but it didn’t happen in this situation because it was fused to another layer. That was one thing I did like about it.

The fit of this sweetheart overbust corset is much more comfortable and more flattering than their underbust corsets. In the overbusts, the bust is 8 inches larger than the waist, and the hips are 10 inches larger in the waist. In the underbust corsets, the ribcage is only 4 inches larger than the waist, and the hips 6 inches larger than the waist. Why did they make the hips so much smaller in the underbust compared to the overbust? Anyway, for this reason a lot of people would naturally decide to use an overbust to train in. In my experience, underbust corsets are usually easier to breathe in (since they don’t extend so high up the ribcage), easier for mobility, and easier to hide under clothing. I just wish that this brand’s underbust corsets were curvier! I did try to cut this overbust down to an underbust, and failed miserably because of the way the bones were sewn into the corset and can’t be removed.

Is it theoretically possible to waist train in a Corsets-UK or CorsetDeal “waist training” corset? I have sorta seen it done in the past (there are die-hard Corsets-UK fans out there who don’t use any other brand), but I can’t guarantee that it’s going to be as safe or effective compared to a custom waist training corset. Even the owner of Corset Wholesale said that there’s no point in comparing a $40 corset with a custom made corset. Therefore, don’t expect a cheaper corset to do the same job as a custom one.

Posted on 4 Comments

Vollers “Paradise” 1808 Velvet Overbust Review

This entry is a summary of the review video “Vollers 1808 Velvet Overbust Review”. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

Fit, length Center front is 13.5 inches, the apex of bust to the bottom is almost 17 inches. Comes a bit over the upper hipbones, and the bust is deliberately cut high. My bust is secure as the fabric comes up and over much like a bra cup does. Gives very gentle curves, only nips the waist in 2 inches on me.
Material 100% cotton velvet on the outside and a poly-cotton twill on the inside.
Construction 4 main panels. Stitching between panels is topstitched, bones are in internal twill boning channels.
Binding Velvet ribbon, machine stitched on front and back.
Waist tape None. Vollers recommends you order the corset 2-4 inches smaller than your natural waist.*Addendum: This particular style doesn’t come with a waist tape because the velvet has a tendency to stretch, and so the waist tape would eventually cause a ridge that is smaller than the rest of the corset, where the waist tape lays. However this style apparently does come with a waist tape if another fashion fabric is chosen.
Modesty panel Back lacing protector is unstiffened and sewn onto one side of the corset, velvet outside and twill inside. There is a modesty placket underneath the knob side of the busk, made from twill.
Busk Standard flexible busk, 12″ long and ½ inch wide on each side, with 5 pins. There’s another ½ inch wide bone on either side of the busk, sewn invisibly in probably in the seam allowance. This stiffens the front but you can’t see the stitching for it. Additionally, there’s a hook-and-eye hand sewn at the top to prevent the bust area from gaping.
Boning 14 bones total in this corset. There are 8 spiral bones (4 on each side), and 6 flats. Like I said before, there’s a ½ inch wide flat on either side of the busk, and in the back there are ¼ inch wide flats sandwiching the eyelets.
Grommets They don’t use grommets, they use 1-part eyelets. There is no washer on back and the eyelet is perforated to split. Vollers says these eyelets are used in heavy boots so will take quite a bit of stress without pulling out.
Laces about half centimetre wide black flat shoelace style laces which are tightly braided. They’re slippery through the eyelets but the laces grab onto themselves so the bow doesn’t slip out easily. Resistant to catching or fraying.
Price Varies greatly with materials used: £195 ($306 USD) in the velvet finish, £165 ($260) in satin finish, £215 ($338) in sequin fabric.

Final Thoughts:

What to say about this corset? A lot of different parts in this corset I either loved or wished were different, and not much middle ground.

Parts I LOVED

The fit of the bust. It was incredible. This was one of the very few overbust corsets I tried that not only gives a daring plunge in the center but also the cups of the bust comes up and over the breast, holding it firmly in place with almost no chance of popping out. It gave a wicked 1/4 side view. I also loved the neat construction of the busk and supporting “invisible” bones. The hook and eye at the top of the bust was a really nice touch. I also loved the quality of the bones and the laces.

Parts I wished were different

Although I loved the fit of the bust, I wished that there was more contrast in the waist. If I were to order this corset again I would probably have gone for a custom fit so I could achieve a greater waist reduction. On the other hand I’m not entirely certain that the corset would have withstood more tension because there was no waist tape. I wished that there were a waist tape in this so I’d feel safer about achieving greater reductions. And even though the 1-part eyelets stayed put nicely and never frayed for me, I would have just psychologically felt more comfortable with 2-part eyelets or grommets. I have to wonder if the eyelets gripped onto the velvet better than other materials, since it’s more plush. Had I ordered the brocade or satin, would the eyelets have held up as well? I will give them the benefit of the doubt and say that their eyelets should grip any and all fabrics as long as they are set as well as they had been in mine.

A note on corset/ hair compatibility

Although it’s not at all the fault of the makers whatsoever, in retrospect choosing the velvet was a bad idea just because of my hair. Velvet loves my hair and my hair loves it. Therefore whenever I wore this corset with my hair down, my hair would wrap all around me and I would soon become entangled. Therefore I only recommend a velvet garment for someone with shorter hair or one who tends to wear their hair up.

You can find the V1808 corset on the Vollers website here.

Posted on Leave a comment

Ms Martha’s Red Silk CorsetVest Review

This entry is a summary of the review video “Ms Martha’s Red Silk CorsetVest Review”. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

Fit, length Center front is 15 inches, comes over my hips like a longline corset. I have a size Medium (waist of 22 inches). Very curvy hourglass silhouette.
Material 3 layers; a red silk fashion layer, stiff interlining and cotton twill lining.
Construction 4 main panels. The silk and the interlining fabric are flatlined, then panels are faux-flat-felled together. Floating liner inside. Bones are sandwiched between the layers of fabric. The collar fastens with velcro.
Binding None, the edges are folded under and topstitched.
Waist tape None. Ms Martha says her corsets are not for tightlacing.
Modesty panel Modesty panel has 3 layers of fabric, attached to one side of the corset and has a single vertical spiral bone running down it. Also the front has a little modesty placket on the knob side of the busk.
Busk Heavy duty busk, 13 inches long and 1 inch thick on each side, with 6 pins. Quite sturdy.
Boning 16 bones in this corset. 6 on each side are spirals, double-boned at the seams, and two sturdy flats sandwiching the grommets.
Grommets 24, 2-part size #0 grommets. These grommets and the washers both have a very large lip which I like. The inside of the grommets have a few very tiny splits, but it’s forgivable because it doesn’t catch on the laces.
Laces Flat braided nylon shoelace style in black; they have a little bit of spring to them. Bulky, but it glides through the grommets more smoothly than in the leather cincher. Very strong and difficult to snap.
Price Currently $225 USD in silk, $285 in leather.

Final Thoughts:

I am in love with this corset. I was initially apprehensive about buying one of these since Ms Martha said that they’re not designed for tightlacing, but wow is this thing ever sturdy. Despite the fact that this doesn’t have a waist tape, this easily took 4 inches off my waist and tapered my ribs down (temporarily). My bust was well-supported (due to the halter design, I couldn’t booble out if I tried) and my hips didn’t hurt. The outer fabric is silk and I initially expected it to be this delicate layer that I could barely touch. Nope. This silk has not stretched even remotely while I was breaking this corset in.

Now, be aware that I don’t know what will happen with your corset if you tightlace in this – mine has seemed to hold up fine – but there might be a possibility of a busk pin popping or a seam coming loose, if Ms Martha doesn’t give guarantees that her corsets stand up to tightlacing. I’m just putting that out there.

One thing I want to touch on is the sizing. These corsets run small. When I was looking at the size chart, a Small was recommended for natural waist sizes 20″ – 28″. Since my waist was around 27″ at the time that I ordered, I thought a Small would be great. Ms Martha strongly recommended that I go with a Medium instead, and I heeded her advice. I’m glad I did, because a size Medium has a closed waist of 22″. Apparently the size Small has a miniscule waist of only 18″ which would have been far too small for me! So if you are petite or around my size, consider ordering a size up. If you’re naturally on the fluffier side, then you will probably be able to reduce more than me, so order true. This store has the largest range of sizes of any off-the-rack store I’ve found to date, offering corsets for people with waist sizes 18″ up to 52″.

You can find the CorsetVest on Ms Martha’s corset shoppe page here, and for your consideration, here is Ms Martha’s size chart that has the “closed waist” corset sizes:

Small Medium Large XL 2XL 3XL 4XL
 18″  22″  26″  30″  34″  38″  42″
Posted on 3 Comments

Ms Martha’s Leather Geometric Cincher Review

This entry is a summary of the review video “Ms Martha’s Leather Geometric Cincher Review”. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

Fit, length Center front is 12 inches, side is 8 inches, cut high on the hip and doesn’t pinch.I have a size Medium and it has a waist of 22 inches. Small has a waist of 18″; each size increases in increments of 4″. I advise you to order the size for your natural waist, or up one size if you’re on the upper end of a size.
Material Leather fashion layer, cut in a ribbon-corset style with horizontal panels. The inner layer is twill. I had to air out the leather for a week before the factory smell dissipated enough for wear.
Construction 5 main panels – 2 of them create most of the shape with horizontal stitching, while the vertical panels hold the hardware and boning. Floating liner inside, and 6 garter tabs.
Binding Black leather; folded under on the front and then clipped short on the underside – common in leather or vinyl binding to minimize bulk.
Waist tape None –  typical of a ribbon-style corset. Ms Martha says her corsets are not for tightlacing.
Modesty panel MASSIVE 10-inch wide back panel that has a single bone running vertically down the center. Leather on the outside and twill on the inside. Also has a 2″ wide leather placket in front.
Busk 11-inch long, heavy duty busk – one inch wide on each side. Quite a bit stiffer than the standard flexible busk.
Boning Total of 8 bones in this corset. 2 spirals on each side seam and 2 spring steels sandwiching each line of grommets in the back.
Grommets 24, 2-part size #0 grommets. These grommets and the washers both have a very large lip which I like. The inside of the grommets have a few very tiny splits, but it’s forgivable because it doesn’t catch on the laces.
Laces Flat braided nylon shoelace style in black; they have a little bit of spring to them. Bulky, so they don’t glide through the grommets quite as well as a thinner one would, but it’s still very strong and very difficult to break.
Price Currently $175 USD in leather, and $170 in silk.

Final Thoughts

This cincher has a beautiful shape – I think it’s one of my favorite shapes of my underbust collection. It is totally comfortable over my hips and feels very secure but not overbearingly tight around my ribs. Because this is made out of leather and twill, I feel that it has stretched out a bit, but not dramatically. Note that the leather did have a strong scent to it when I first opened the package, but I left the corset to air out for a few days in a ventilated room and the smell soon dissipated. Later on I did change out the laces – while the original ones were very strong, it was also quite thick so I experienced a lot of friction when trying to tighten the corset, making it difficult to put on and take off so I simply changed them with thinner shoelaces. But I still own and wear this corset quite often, a year later – you can see it in some of my later videos, like this dressing with your corset post.

Now, be aware that I don’t know what will happen with your corset if you tightlace in this – mine has seemed to hold up fine – but there might be a possibility of a busk pin popping or a seam coming loose, if Ms Martha doesn’t give guarantees that her corsets stand up to tightlacing. I’m just putting that out there.

One thing I want to touch on is the sizing. These corsets run small. When I was looking at the size chart, a Small was recommended for natural waist sizes 20″ – 28″. Since my waist was around 27″ at the time that I ordered, I thought a Small would be great. Ms Martha strongly recommended that I go with a Medium instead. Apparently the size Small has a miniscule waist of only 18″ which was been far too small for me! I later heeded her advice and she was very kind and patient with me about exchanging this cincher. A size Medium has a closed waist of 22″.  So if you are petite or if you are around my size, consider ordering a size up. If you’re naturally on the fluffier side, then you will probably be able to reduce more than me, so order true. This store has the largest range of sizes of any off-the-rack store I’ve found to date, offering corsets for people with waist sizes 18″ up to 52″.

So for your consideration, here is Ms Martha’s size chart that has the “closed waist” corset sizes:

Small Medium Large XL 2XL 3XL 4XL
 18″  22″  26″  30″  34″  38″  42″
Posted on Leave a comment

Axfords C242 Lace Underbust Corset Review

This entry is a summary of the review video “Axfords C242 Corset Review” which you can watch on YouTube here:

Fit, length Circumferential measurements are very comfortable; no pinching in the hips or ribcage. Much curvier than I was expecting. This is a longline corset, starting lower on the ribcage and ending low on the hips – center front is 11″.
Material 3 layers: the strength layer is the inside lining – a tightly-weaved white cotton coutil (made especially for Axfords). Coral satin fashion fabric is flatlined to the coutil, and then the white real lace is laid ontop of the satin.
Construction The seams are top-stitched; bones are in internal boning channels at the seams made from twill or Prussian tape.
Binding Satin on one side and grosgrain ribbon on the other side. Quite unique from commercial bias binding used in other corsets. Neatly machine stitched on both sides.
Waist tape None.
Modesty panel Attached 6″ wide protector, not boned but it is stiffened, so it’s flexible but stands on its own. When I’m lacing down it doesn’t need to be adjusted, and it curves nicely with the contours of my spine. Very comfortable. Has a placket overtop of the busk to hide the hardwear.
Busk Heavy busk, 10″ long and one inch wide on each side. Quite a bit stiffer than the standard flexible busk.
Boning 14 bones total. There are 10 hefty spiral bones – they’re 7mm wide instead of 5mm wide. Also four ¼ inch wide spring steel bones which are also very sturdy and quite thick.
Grommets 30 grommets total, size #00 two-part grommets with moderate flange; set equidistantly. Axfords says that they use smaller grommets set closer together for more controlled tightening of the corset. Some splits along the back of the grommets but they do not catch on the laces and are not pulling out.
Laces Strong tightly woven braided shoe-lace style laces; they’re thin, they grip well and they are very long. No stretch or spring to the lace.
Price Currently £125 ($195 USD) for the lace overlay style, but £115 ($180 USD) without the lace.

Final Thoughts:

This corset is adorable, feminine, pretty, shapely… I think this is the girliest underbust I own – pink with floral lace. I’m impressed at how smoothly the delicate lace lays (say that five times fast!) over the pink satin – do I detect some roll-pinning? ;) Even when worn at large reductions, the lace does not pull away from the seams or wrinkle up with stress.

I was initially concerned about the strength fabric as it was said to be coutil but didn’t have a herringbone weave – this was my first experience with a plain-weave coutil – yet it has stood up the test of time, even without a waist tape. The grommets are also still holding up well several months later – I find my preferences now leaning towards more and smaller grommets on my lacing panel as it’s easier to make fine adjustments when lacing up.

The fit of this corset is flattering as well (in my opinion); I like the conical ribcage, and the hip gores make this longline corset very  comfortable over my hips. The shape is quite similar to the Mae Extreme corset by What Katie Did – I am able to cinch down further in this corset than I was able to in the regular Mae.

All of Axfords’ corsets come with a complimentary storage bag as well – of course, don’t buy a corset just for the bag, but only if you think the corset is as lovely as I think it is. You can see this corset in other colors, and other corset styles on their website here.

Posted on Leave a comment

Axfords C112 Lace Overbust Corset Review

This entry is a summary of the review video “Axfords C112 Corset Review” which you can watch on YouTube here:

Fit, length Circumferential measurements are very comfortable; no pinching in the hips or ribcage. Much curvier than I was expecting. Not a longline corset; comes to my upper hips. It’s advertised as an overbust corset but it is closer to a demibust corset on me – center front is 12½”, while highest part is about 13″.
Material 3 layers: the strength layer is the inside lining – a tightly-weaved black cotton coutil (made especially for Axfords). Satin fashion fabric is flatlined to the coutil, and then the real lace is laid overtop of the satin.
Construction The seams are top-stitched; bones are in internal boning channels at the seams made from twill or Prussian tape.
Binding Satin on one side and grosgrain ribbon on the other side. Quite unique from commercial bias binding used in other corsets. Neatly machine stitched on both sides.
Waist tape None.
Modesty panel Attached 6″ wide protector, not boned but it is stiffened, so it’s flexible but stands on its own. When I’m lacing down it doesn’t need to be adjusted, and it curves nicely with the contours of my spine. Very comfortable.
Busk Heavy busk, 12″ long and one inch wide on each side. Quite a bit stiffer than the standard flexible busk.
Boning 14 bones total. There are 10 hefty spiral bones – they’re 7mm wide instead of 5mm wide. Also four ¼ inch wide spring steel bones which are also very sturdy and quite thick.
Grommets 32 grommets total, size #00 two-part grommets with moderate flange; set equidistantly. Axfords says that they use smaller grommets set closer together for more controlled tightening of the corset. Some splits along the back of the grommets but they do not catch on the laces and are not pulling out.
Laces Strong tightly woven braided shoe-lace style laces; they’re thin, they grip well and they are very long. No stretch or spring to the lace.
Price Currently £135 ($213 USD) for the lace overlay style, but £125 ($197 USD) without the lace.

Final Thoughts:

The red satin with floral lace is a beautiful combination (apparently I’m guilty of requesting that combination on another corset as well). I’m impressed at how smoothly the delicate lace lays over the red satin – do I detect some roll-pinning? ;) Even when the back is completely closed, don’t seem to be tension lines and the lace is not coming away from the stitching.

I was initially concerned about the strength fabric as it was said to be coutil but didn’t have a herringbone weave – this was my first experience with a plain-weave coutil – yet it has stood up the test of time, even without a waist tape. The grommets are also still holding up well several months later – I find my preferences now leaning towards more and smaller grommets on my lacing panel as it’s easier to make fine adjustments when lacing up.

As for the fit of this corset, it’s indeed very curvy – I didn’t feel any pinching on my hips or much compression at the bust. It’s rare for me to be able to close an overbust corset all the way comfortably, but it was no problem with this one. Unfortunately, because of my long torso and the extremely gentle sweetheart shape of the corset, this is more of a demibust than an overbust on me. I would never be able to wear this without something underneath if I want to keep myself decent. This corset looked amazing on my more petite sister and I ended up gifting it to her, so this corset has certainly not gone to waste.

All Axfords corsets also come with a complimentary storage bag; an offer I have never seen with any other company. The bags are large enough to hold two corsets, so they have come in quite handy in keeping my corsets safe and pristine. You can see this corset and other styles at the Axfords website here.