Posted on Leave a comment

Review: Lara Mesh Underbust (Glamorous Corset)

This entry is a summary of the review video “Review: Lara Mesh Underbust (Glamorous Corset)”. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here. See the quick stats in the table below the video, and my written personal opinion at the bottom!

Quick Stats:

Fit, lengthCustom drafted to my measurements: Center front is 12.5 inches long, princess seam is 10 inches (5.5 inches from the waist up, 4.5 inches from the waist down), the side seam is 11 inches and the center back is 12.5 inches long. Rib spring is 7″, hip spring is 10″. Ribs are relatively conical and brings in the floating ribs, hip very slightly curved.
MaterialEssentially one layer of open weave fishnet style fabric. Vertical panels at center front, back, and boning channels are black cotton twill.
Pattern6 panel pattern (same pattern as their other Lara underbusts in different fabrics).Panels 1-2 converge towards lower tummy, panels 3-4 give space over the hip, panel 5 has a bit of curve for both the back and hip, and panel 6 is fairly straight.
ConstructionStraightforward single-layer construction; the mesh fabric is sandwiched between the boning channels to reinforce the seams and provide a place for the bones to go.
Waist tapeVery apparent waist tape present of the inside of the corset, 1 inch wide black grosgrain ribbon.
BindingBias strips of black cotton twill, machine stitched on both sides. Stitched in the ditch on the outside, and edge serged and stitched flat on the inside (probably to reduce bulk). Garter tabs also included.
Modesty panelBack modesty panel is 5.5 inches wide (covering lacing gap of about ~4 inches). Made from 2 layers of black cotton twill, unstiffened, stitched to the side (easily removable if desired). There’s also a small modesty placket in the front, also made from black cotton twill (1/4″ wide).
BuskStandard flexible busk (1/2″ on each side), 11 inches long, 5 loops and pins with the bottom two closer together for better control at the lower tummy. Adjacent spiral steels add some support.
Boning26 bones total in this corset, 13 on each side (not including busk or modesty panel). Double boned on the seams (5 seams on each side, so 10 spiral steels on each side). There’s also the spiral bone by the busk (see my thoughts at the bottom for more on that) and two flat steels sandwiching the grommets (these are stainless steel so they’re less magnetic than mild carbon steels.
GrommetsThere are 24, two-part size #0 grommets (12 on each side). They have a small/medium flange and are spaced equidistantly, and finished in silver. Unfortunately a couple of the grommets at the waistline are loose / wobbly. (See Final Thoughts for more)
LacesThe laces are your standard workhorse of the lacing world: 1/4″ wide black flat nylon shoelace-style laces, which are extremely long, with a little bit of spring or stretch, and they’re abrasion-resistant.
Price & size range The Lara Mesh is available in sizes 18″ through 40″ and priced at $84 USD. Glamorous Corset has generously provided a discount for my followers, which you can find through this link!

Final Thoughts:

The first thing that stood out to me about the Lara Mesh is that it’s a lower-price point affordable OTR open-weave mesh corset, but it manages to retain its relatively conical / straight rib silhouette. Normally in fishnet-style corsets, the wearer’s ribs push out the corset to give a rounded silhouette. This doesn’t happen with fine-weave mesh, but fine-weave is usually a less cool and breezy option. Part of the reason that this corset retains its conical silhouette (apart from the pattern, obviously) is its heavy use of double-boning channels, leaving relatively little space between the panels for the ribs to allow expansion. I surmise that the smaller the corset (i,e. the less space between the panels), the more this retaining of the conical silhouette is true — and the larger the corset, the wider the panels, and the more likely the ribs are to show some roundness. But it’s an interesting observation nonetheless!

One odd choice in construction includes the spiral steel bones adjacent to the busk – spiral bones only contribute to maintaining vertical tension (helping to reduce wrinkling or collapsing of the fabric) but they tend not to add rigidity and flatness the way flat steels do. The purpose of the busk is not only for vertical tension, but it provides quick access in and out of the corset (obviously) and also flattens the tummy in the center front. The purpose of adjacent flat steels by the busk is to further flatten the tummy, so flat steels should always be used adjacent to the busk.

It’s been a long time since I’ve reviewed a corset with grommet issues, but unfortunately this corset did show some wobbly grommets right at the waistline. This might be due to less fabric for the grommet to “bite” into (compared to the all-cotton or velvet Lara corsets, assuming that all corsets have the panel-6 fabric extend right to the grommet system), and the mesh fabric obviously doesn’t have much to bite into. Another possibility is simply the property of the fishnet fabric itself being more flexible and allowing distortion of the back panel. This is not a slight against the company; as my fishnet style corsets from other brands have also eventually had grommet issues. If panel 6 were made entirely cotton twill and the grommet system were reinforced perhaps with one more layer, the grommets would have less chance of pulling out. But again, I’m not personally faulting Glamorous Corset, because to my memory, all of the curvy fishnet OTR corsets I’ve owned for 3+ months, regardless of the brand, had at least one grommet pull out.

Whether you go for the mesh or another finish for the Lara Underbust, Rachel from Glamorous Corset has generously provided a discount code for my followers.

Have you tried this mesh corset or another mesh piece from Glamorous Corset? What do you think of it? Leave a comment down below!

Posted on Leave a comment

Glamorous Corset “Jenna” Sweetheart Overbust Review

This entry is a summary of the review for the “Jenna” overbust corset in blue satin, made by Glamorous Corset. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

 

Fit, length Center front is just short of 15 inches long, the princess seam is 15.5 inches (9 inches above the waist, 6.5 inches below the waist), the side seam is 14 inches and the center back is 12.75 inches long.
Bust spring is 7″, hip spring is 9″. The silhouette is gentle (modern slim).
Material The fashion fabric is blue satin, and the lining is black cotton twill.
Construction 5-panel pattern (10 panels total). Panels 1-2 give space for the bust, and panels 2-3-4 make the curve over the hip. Constructed using the welt-seam method.
Waist tape One-inch-wide waist tape, secured “invisibly” between the layers of fabric. Full width (extends from center front panel to center back).
Binding Matching strips of blue satin, machine stitched on both outside and inside. Stitched in the ditch on the outside, and topstitch inside. There are also 6 garter tabs (3 on each side).
Modesty panel 6 inches wide, unstiffened, made from satin on the outside, and black cotton twill on the inside. Attached to one side of the corset with a line of stitching (easily removed if desired). In the front, there is a ¼ inch wide modesty placket, finished in blue satin.
Busk 14” long, with 6 loops and pins, the bottom two are a bit closer together. Stainless steel busk which is very slightly wider and slightly stiffer than standard.
Boning 20 bones total in this corset, 10 on each side. Double boned on the seams with ¼ inch wide spirals. The bones sandwiching the grommets are flat steel (probably stainless steel).
Grommets There are 28, two-part size #00 grommets (14 on each side). They have a small / medium flange and are spaced equidistantly, and finished in silver. There are a few splits on the underside of the grommets, and due to the choice in laces, they don’t catch much.
Laces Black, ¼” wide flat nylon “workhorse” shoelace. They are a bit springy, but they hold bows and knots well and they are long enough.
Price Available in sizes 18″ up to 30″ closed waist (in blue).
For black and white satin, size range is 18″ – 40″
For sizes 18-30″ the price is $79 USD, and sizes 32″ – 40″ are $84 USD.
Available on the Glamorous Corset website here.

 

Posted on 2 Comments

Glamorous Corset “Dita” Leather Underbust Review

This entry is a summary of the review for the “Dita” underbust corset in black leather, made by Glamorous Corset. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

 

Fit, length Center front is just short of 12.75 inches long, the princess seam is 10.5 inches (5.5 inches above the waist, 5 inches below the waist), the side seam is also 10 inches and the center back is 13 inches long.
Rib spring is 7″, hip spring is also 7″. The rib is ever so slightly cupped, but appears more conical. The silhouette is a moderate hourglass.
Material The fashion fabric is black leather (also available in satin or cotton fashion fabric), and the lining is black cotton twill.
Construction 6-panel pattern (12 panels total). This pattern may be designed to be worn with a slight gap in the back, because panel 4 has the most flare over the hip. Constructed using the welt-seam method.
Waist tape One-inch-wide waist tape, secured “invisibly” between the layers of fabric. Full width (extends from center front panel to center back).
Binding Matching strips of black leather, machine stitched on both outside and inside. Small tidy topstitch on the outside, and raw inside (leather doesn’t fray). There are also 6 garter tabs (3 on each side).
Modesty panel 6 inches wide, unstiffened, made from leather on the outside, and black cotton twill on the inside. Attached to one side of the corset with a line of stitching (easily removed if desired, but the leather may “scar”). In the front, there is a ¼ inch wide modesty placket, finished in black cotton.
Busk 11.5” long, with 5 loops and pins, the bottom two are a bit closer together. Standard flexible busk ( ½” wide on each side) and the busk is slightly stiffer than standard.
Boning 24 bones total in this corset, 12 on each side. Double boned on the seams with ¼ inch wide spirals. The bones sandwiching the grommets are flat steel (probably stainless steel).
Grommets There are 24, two-part size #00 grommets (12 on each side). They have a small / medium flange and are spaced equidistantly, and finished in silver. Only a few splits on the underside of the grommets, and due to the choice in laces, they don’t catch.
Laces The laces are black, ¼” wide flat nylon “workhorse” shoelace. They are a bit springy, but they hold bows and knots well and they are long enough.
Price Available in sizes 18″ up to 40″ closed waist. Comes in black leather, and also various shades of cotton and satin if you’re opposed to leather.
Leather corsets: Sizes 18″ – 30″ are $89 USD, and sizes 32″ – 40″ are $94 USD.
Non-leather corsets are a bit less expensive, at $69 USD.
Available on the Glamorous Corset website here.

 

Final Thoughts:

Dita underbust (shown here in satin instead of leather), model unknown. Starts at $69 USD. Click through to visit Glamorous Corset.

This corset would be a good fit for someone with ribs and hips that are the same size – so if you are athletic and have well developed lat muscles, or if you happen to have a fuller ribcage and / or a more narrow pelvis, this evenly-balanced corset will give space for your ribs while not flaring too much at the hips. However, if you’re more of a curvy hourglass or pear shape, you might feel more comfortable in a different style that won’t compress your hips.

This corset is one that I warmed to over time. The very first time I put it on, the leather was stiffer and the corset gave a gentle reduction and a silhouette that looks like “) (” parentheses, which is not my aesthetic favorite. But as I wore it in over time, the leather softened and it molded a bit better to my body, I saw its true silhouette come out and it gave me a kind of comic book “Superhero V” shaped torso that looks impressive on both men and women. As such, this corset would be great for cosplay and costumes (and yes, it comes in brown for my steampunk loving readers!).

So this is just another example where we should not judge a book by its cover (or rather, should not judge the corset straight out of the box!).

For those who are opposed to leather, this corset also comes in cotton and satin – although I can’t speak for their silhouette and fit being identical to this one once seasoned.

Find the Glamorous Corset Dita and other styles in Glamorous Corset’s shop here.

Do you have the Dita corset, or another piece from Glamorous Corset? Let us know what you think of it in a comment below.

Posted on Leave a comment

Glamorous Corset “Emma” Mesh Underbust Review

This entry is a summary of the review for the “Emma” underbust corset in black mesh, made by Glamorous Corset. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

 

Fit, length Center front is just short of 10.5 inches long, the princess seam is 10 inches, the side seam is also 10 inches and the center back is 11.5 inches long.
Rib spring is 6″, hip spring is 6″. The waist does tend to run a bit large / expand in mesh corsets. Offers a gentle (modern slim) silhouette.
Material The mesh parts are single layer hexagonal-hole “fishnet” style netting (seemingly industry standard for OTR). The front and back panels, boning channels and binding are all black cotton bull denim (a coarse weave twill).
Construction 5-panel pattern (10 panels total). Mesh panels were assembled together, and seams were sandwiched by boning channels on the outside and inside. The channels straddle the seams and reinforce the seams.
Waist tape One-inch-wide waist tape made from single-faced satin ribbon, stitched on the inside of the corset and secured at boning channels. Full width (extends from center front panel to center back).
Binding Matching black cotton twill, machine stitched on both sides. The front was stitched in the ditch and the back has a top stitch. 4 garter tabs (2 on each side).
Modesty panel 5.5 inches wide, unstiffened, made from 2 layers of black cotton twill. Attached to one side of the corset with a line of stitching (easily removed if desired). In the front, there is a ¼ inch wide modesty placket, also finished in black cotton.
Busk 9” long, with 5 loops and pins, equidistantly spaced. Heavy duty busk (1″ wide on each side) with an additional ¼” spiral steel bone adjacent to the busk on each side.
Boning 22 bones total in this corset, 11 on each side. Double boned on the seams with ¼ inch wide spirals. The bones adjacent to the busk are also spiral steel. The bones sandwiching the grommets are flat steel (probably stainless steel).
Grommets There are 24, two-part size #00 grommets (12 on each side). They have a small / medium flange and are spaced equidistantly, and finished in silver. Only a few splits on the underside of the grommets, and due to the choice in laces, they don’t catch much.
Laces The laces are black, ¼” wide flat nylon shoelace. They are a bit springy, but they hold bows and knots well and they are long enough.
Price Available in sizes 18″ up to 40″ closed waist.
Comes in black mesh, white mesh, and 4 shades of satin.
Sizes 18″ – 28″ are $79 USD, and sizes 30″ – 40″ are $84 USD.
Only available on the Glamorous Corset website here.

 

Final Thoughts:

Emma Mesh underbust (available in black mesh and white mesh), model unknown. $79-$84 USD. Click through to visit Glamorous Corset.

The Emma corset is a mid-length mesh corset that offers gentle waist reduction. If you have a seated torso length that is less than 10 inches, you may be more comfortable in their shorter “Bella” mesh cincher, and if you prefer a curvier, longer corset, their “Jolie” longline may suit your preferences.

The mesh is the OTR standard “fishnet” type cotton netting, which offers breathability and quite a lot of flexibility, while the sturdy double boning adds body and rigidity to the corset for posture support and vertical tension. Do keep in mind that because the mesh can expand, this mesh corsets (like other mesh corsets) can expand 1-2 inches when worn (I find this is true of nearly all OTR corsets with this kind of fishnet material, regardless of the brand), so if you’re looking for a specific waist reduction, you may need to go one size down from your usual size – but ensure that your ribs and hips will fit that smaller size as well.

One viewer on Youtube asked about the similarities and differences between this Emma corset compared to True Corset’s mesh cincher, which I reviewed a few years back. For the similarities, both corsets have the same number of panels, and the top and bottom edges are cut straight across in a similar way, and the type of mesh / fabrics used are comparable, but that’s where the similarities end. The measurements are different (in the True Corset, the rib spring is +5 inches, and the hip spring is +8 inches. In this Emma, the rib spring and hip spring are both +6 inches). The Emma also has a slightly different construction technique (double boned, and the boning channels seem to be reinforced as well) – and because of the heavier boning, it lends a smoother, more mild silhouette than the True Corset. If I recall correctly, True Corset dipped or sealed their steels in a kind of shrink tubing, whereas in the Emma corset, they used cotton channels on inside and outside.

Find the Glamorous Corset Emma and other mesh corsets in Glamorous Corset’s shop here.

Do you have the Emma corset, or another piece from Glamorous Corset? Let us know what you think of it in a comment below.

Posted on Leave a comment

Glamorous Corset “Bella” Mesh Cincher Review

This entry is a summary of the review for the “Bella” cincher in black mesh, made by Glamorous Corset. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

 

Fit, length Center front is just short of 8 inches long, the side seam is 6.5 inches and the center back is 8.25 inches long.
Rib spring is 4″, upper hip spring is 5″. The waist does tend to run a bit large / expand in mesh corsets. Offers a gentle (modern slim) silhouette.
Material The mesh parts are single layer hexagonal-hole “fishnet” style netting (seemingly industry standard for OTR). The front and back panels, boning channels and binding are all black cotton bull denim (a coarse weave twill).
Construction 4-panel pattern (8 panels total). Mesh panels were assembled together, and seams were sandwiched by boning channels on the outside and inside. The channels straddle the seams and reinforce the seams.
Waist tape One-inch-wide waist tape made from single-faced satin ribbon, stitched on the inside of the corset and secured at boning channels. Full width (extends from center front panel to center back).
Binding Matching black cotton twill, machine stitched on both sides. The front was stitched in the ditch and the back has a top stitch. No garter tabs.
Modesty panel 5 inches wide, unstiffened, made from 2 layers of black cotton twill. Attached to one side of the corset with a line of stitching (easily removed if desired). In the front, there is a ¼ inch wide modesty placket, also finished in black cotton.
Busk 6.5” long, with 3 loops and pins. Heavy duty busk (1″ wide on each side) with an additional ¼” spiral steel bone adjacent to the busk on each side.
Boning 18 bones total in this corset, 9 on each side. Double boned on the seams with ¼ inch wide spirals. The bones adjacent to the busk are also spiral steel. The bones sandwiching the grommets are flat steel (probably stainless steel).
Grommets There are 16, two-part size #00 grommets (8 on each side). They have a small / medium flange and are spaced equidistantly, and finished in silver. Only a few splits on the underside of the grommets, and due to the choice in laces, they don’t catch too much.
Laces The laces are black, ¼” wide flat nylon shoelace. They are a bit springy, but they hold bows and knots well and they are long enough.
Price Available in sizes 18″ up to 40″ closed waist.
Comes in black mesh, white mesh, 5 colors of satin, and 5 colors of leather.
Sizes 18″ – 30″ are $79 USD, and sizes 32″ – 40″ are $84 USD.
Only available on the Glamorous Corset website here.

 

Final Thoughts:

Bella Mesh cincher, model unknown. $79-$84 USD. Click through to visit Glamorous Corset.

The Bella is quite possibly the shortest mesh cincher I’ve ever tried – so if you have a very short torso and you’re looking for something you can easily sit down in, which can offer lumbar support through your work day without making you overheated, the Bella may be a viable option for you. However, if you have a longer torso, you might experience a bit of “rib squidge” above the corset and below your bra band like I experienced. For people like us, there are longer mesh corsets available (like the gentle silhouette “Emma” underbust, or the curvy longline “Jolie” corset).

The mesh is the OTR standard “fishnet” type cotton netting, which offers breathability and quite a lot of flexibility, while the sturdy double boning adds body and rigidity to the corset for posture support and vertical tension. Do keep in mind that because the mesh can expand, this mesh corsets (like other mesh corsets) can expand 1-2 inches when worn (I find this is true of nearly all OTR corsets with this kind of fishnet material, regardless of the brand), so if you’re looking for a specific waist reduction, you may need to go one size down from your usual size – but ensure that your ribs and hips will fit that smaller size as well.

Find the Glamorous Corset Bella and other mesh corsets in their shop here.

Do you have the Bella corset, or another corset from Glamorous Corset? Let us know what you think of it in a comment below.

Posted on Leave a comment

Glamorous Corset “Lara” Waist Trainer Review

This entry is a summary of the review for the “Lara” waist training underbust corset in black mesh, made by Glamorous Corset. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

 

Fit, length Center front is just short of 12.5 inches long, princess seam is 9.5 inches (5 inches from the waist up, 4.5 inches from the waist down), the side seam is 10.5 inches and the center back is 12.5 inches long.
Rib spring is 7″, lower hip spring is 10″. Ribs are on the conical side. This is a “mid-hip” corset, which covers the iliac crest slightly, but this corset can still be worn by those with an average length torso.
Material Feels like 2 layers of black cotton bull denim (center front panels were more heavily interfaced than the other panels).
Construction 6-panel pattern (12 panels total). Panels 1-2 converge and taper towards the lower tummy. Panels 3-4 provide space over the hips.
Panels were assembled using the welt-seam method.
Waist tape One-inch-wide waist tape, stitched “invisibly” between the two layers. Full width (extends from center front panel to center back).
Binding Matching bias strips of black bull denim, machine stitched on both sides. The topside was stitched in the ditch and the back has a top stitch. Also 6 garter tabs (3 on each side).
Modesty panel 6.5 inches wide, unstiffened, made from 2 layers of black cotton bull denim. Attached to one side of the corset with a line of stitching (easily removed if desired). In the front, there is a ¼ inch wide modesty placket, also finished in black cotton.
Busk 11” long, with 5 loops and pins, the lower two a bit closer together. Standard flexible busk (no adjacent bones by the busk).
Boning 24 bones total in this corset, 12 on each side. Double boned on the seams with ¼ inch wide spirals. The bones sandwiching the grommets are flat steel (stainless steel, so they attract the magnet slightly less).
Grommets There are 24, two-part size #00 grommets (12 on each side). They have a small / medium flange and are spaced equidistantly, and finished in silver. The washers are larger than the top-hat side (which is a perk). Many splits on the underside of the grommets, but due to the choice of laces, they don’t catch too much.
Laces The laces are black, ¼” wide flat nylon shoelace. They are a bit springy / spongey, but they hold bows and knots well and they are long enough.
Price Available in sizes 18″ up to 40″ closed waist.
Sizes 18″ – 30″ are $79 USD, and sizes 32″ – 40″ are $84 USD.
Only available on the Glamorous Corset website here (this ref link will give you 15% off your first purchase).

 

Final Thoughts:

Lara training underbust corset, model unknown. $79-$84 USD. Click through to visit Glamorous Corset.

This is a heavy duty piece, so if you’re looking for a “little black corset” or entry-level trainer that’s more on the rigid or thicker side, you may like this one. Its conical silhouette and gently rounded hip offer a lovely silhouette, but if you have inflexible or sensitive ribs that can’t tolerate a conical rib corset, you might want to start with a different style instead.

If you like the silhouette and length or this corset but prefer a more lightweight and flexible version, it comes in mesh as well. While I haven’t reviewed the mesh Lara per se, take a look at my Jolie mesh review so you know what to expect from the Glamorous mesh pieces.

This corset also came in a lovely velvet drawstring storage / dustbag, which I always like.

Find the Glamorous Corset Lara and other training corsets in their shop here (using this referral link will get you 15% off your first purchase).

 

Posted on Leave a comment

Glamorous Corset “Jolie” Mesh Longline Review

This entry is a summary of the review for the “Jolie” longline corset in black mesh, made by Glamorous Corset. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

 

Fit, length Center front is just short of 14 inches long, princess seam is 10 inches (5.5 inches from the waist up, 4.5 inches from the waist down), the side seam is 12.5 inches and the center back is 14 inches long.
Rib spring is 8″, lower hip spring is 12″. Ribs are gently rounded due to the flexibility and expansion of the mesh. Longline corset, coming low over the abdomen and hips.
Material The mesh parts are single layer hexagonal-hole “fishnet” style netting (seemingly industry standard for OTR). The front and back panels, boning channels and binding are all black cotton bull denim (a coarse weave twill).
Construction 6-panel pattern (12 panels total). Panels 1-2 converge and taper towards the lower tummy. Panels 3-4 provide space over the hips. Panels were assembled together, and seams were sandwiched by boning channels on the outside and inside.
Waist tape One-inch-wide waist tape made from single-faced satin ribbon, stitched on the inside of the corset and secured at boning channels. Full width (extends from center front panel to center back).
Binding Matching black bull denim, machine stitched on both sides. The front was stitched in the ditch and the back has a top stitch. Also 6 garter tabs (3 on each side).
Modesty panel 5.5 inches wide, unstiffened, made from 2 layers of black cotton bull denim. Attached to one side of the corset with a line of stitching (easily removed if desired). In the front, there is a ¼ inch wide modesty placket, also finished in black cotton.
Busk 11.5” long, with 5 loops and pins, the lower two a bit closer together. Standard flexible busk, with an additional ¼” spiral steel bone adjacent to the busk on each side.
Boning 26 bones total in this corset, 13 on each side. Double boned on the seams with ¼ inch wide spirals. The bones adjacent to the busk are also spiral steel. The bones sandwiching the grommets are flat steel (probably stainless steel).
Grommets There are 28, two-part size #00 grommets (14 on each side). They have a small / medium flange and are spaced equidistantly, and finished in silver. The washers are larger than the top-hat side (which is a perk). Many splits on the underside of the grommets, but due to the choice in laces, they don’t catch too much.
Laces The laces are black, ¼” wide flat nylon shoelace. They are a bit springy / spongey, but they hold bows and knots well and they are long enough.
Price Available in sizes 18″ up to 40″ closed waist.
Sizes 18″ – 30″ are $79 USD, and sizes 32″ – 40″ are $84 USD.
Only available on the Glamorous Corset website here (this ref link will give you 15% off your first purchase).

 

Final Thoughts:

Jolie Mesh longline underbust corset, model unknown. $79-$84 USD. Click through to visit Glamorous Corset.

The Jolie corset is my first review of seven different mesh corset reviews I did in 2017, showing that mesh corsets are now a huge part of the OTR corset market and they’re definitely here to stay!

The Jolie is quite possibly the longest mesh underbust I’ve ever tried – many of the Orchard Corset mesh pieces are shorter from the waist down and stop slightly higher on my hip, while many of Mystic City’s corsets are shorter from the waist up and stop short of my underbust. If you have a very long torso and need more coverage and support both above and below the waist, the Jolie may be a viable option for you. However, if you have a seated torso length of less than 10 inches, you might feel more comfortable in a shorter mesh corset instead.

The mesh is the OTR standard “fishnet” type cotton netting, which offers breathability and quite a lot of flexibility, while the sturdy double boning adds body and rigidity to the corset for posture support and vertical tension. Do keep in mind that because the mesh can expand, this mesh corsets (like other mesh corsets) can expand 1-2 inches when worn (I find this is true of nearly all OTR corsets with this kind of fishnet material, regardless of the brand), so if you’re looking for a specific waist reduction, you may need to go one size down from your usual size.

Find the Glamorous Corset Jolie and other mesh corsets in their shop here (using this referral link will get you 15% off your first purchase).