Review: Lara Mesh Underbust (Glamorous Corset)
This entry is a summary of the review video “Review: Lara Mesh Underbust (Glamorous Corset)”. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here. See the quick stats in the table below the video, and my written personal opinion at the bottom!
|Fit, length||Custom drafted to my measurements: Center front is 12.5 inches long, princess seam is 10 inches (5.5 inches from the waist up, 4.5 inches from the waist down), the side seam is 11 inches and the center back is 12.5 inches long. Rib spring is 7″, hip spring is 10″. Ribs are relatively conical and brings in the floating ribs, hip very slightly curved.|
|Material||Essentially one layer of open weave fishnet style fabric. Vertical panels at center front, back, and boning channels are black cotton twill.|
|Pattern||6 panel pattern (same pattern as their other Lara underbusts in different fabrics).Panels 1-2 converge towards lower tummy, panels 3-4 give space over the hip, panel 5 has a bit of curve for both the back and hip, and panel 6 is fairly straight.|
|Construction||Straightforward single-layer construction; the mesh fabric is sandwiched between the boning channels to reinforce the seams and provide a place for the bones to go.|
|Waist tape||Very apparent waist tape present of the inside of the corset, 1 inch wide black grosgrain ribbon.|
|Binding||Bias strips of black cotton twill, machine stitched on both sides. Stitched in the ditch on the outside, and edge serged and stitched flat on the inside (probably to reduce bulk). Garter tabs also included.|
|Modesty panel||Back modesty panel is 5.5 inches wide (covering lacing gap of about ~4 inches). Made from 2 layers of black cotton twill, unstiffened, stitched to the side (easily removable if desired). There’s also a small modesty placket in the front, also made from black cotton twill (1/4″ wide).|
|Busk||Standard flexible busk (1/2″ on each side), 11 inches long, 5 loops and pins with the bottom two closer together for better control at the lower tummy. Adjacent spiral steels add some support.|
|Boning||26 bones total in this corset, 13 on each side (not including busk or modesty panel). Double boned on the seams (5 seams on each side, so 10 spiral steels on each side). There’s also the spiral bone by the busk (see my thoughts at the bottom for more on that) and two flat steels sandwiching the grommets (these are stainless steel so they’re less magnetic than mild carbon steels.|
|Grommets||There are 24, two-part size #0 grommets (12 on each side). They have a small/medium flange and are spaced equidistantly, and finished in silver. Unfortunately a couple of the grommets at the waistline are loose / wobbly. (See Final Thoughts for more)|
|Laces||The laces are your standard workhorse of the lacing world: 1/4″ wide black flat nylon shoelace-style laces, which are extremely long, with a little bit of spring or stretch, and they’re abrasion-resistant.|
|Price & size range|| The Lara Mesh is available in sizes 18″ through 40″ and priced at $84 USD. Glamorous Corset has generously provided a discount for my followers, which you can find through this link!|
The first thing that stood out to me about the Lara Mesh is that it’s a lower-price point affordable OTR open-weave mesh corset, but it manages to retain its relatively conical / straight rib silhouette. Normally in fishnet-style corsets, the wearer’s ribs push out the corset to give a rounded silhouette. This doesn’t happen with fine-weave mesh, but fine-weave is usually a less cool and breezy option. Part of the reason that this corset retains its conical silhouette (apart from the pattern, obviously) is its heavy use of double-boning channels, leaving relatively little space between the panels for the ribs to allow expansion. I surmise that the smaller the corset (i,e. the less space between the panels), the more this retaining of the conical silhouette is true — and the larger the corset, the wider the panels, and the more likely the ribs are to show some roundness. But it’s an interesting observation nonetheless!
One odd choice in construction includes the spiral steel bones adjacent to the busk – spiral bones only contribute to maintaining vertical tension (helping to reduce wrinkling or collapsing of the fabric) but they tend not to add rigidity and flatness the way flat steels do. The purpose of the busk is not only for vertical tension, but it provides quick access in and out of the corset (obviously) and also flattens the tummy in the center front. The purpose of adjacent flat steels by the busk is to further flatten the tummy, so flat steels should always be used adjacent to the busk.
It’s been a long time since I’ve reviewed a corset with grommet issues, but unfortunately this corset did show some wobbly grommets right at the waistline. This might be due to less fabric for the grommet to “bite” into (compared to the all-cotton or velvet Lara corsets, assuming that all corsets have the panel-6 fabric extend right to the grommet system), and the mesh fabric obviously doesn’t have much to bite into. Another possibility is simply the property of the fishnet fabric itself being more flexible and allowing distortion of the back panel. This is not a slight against the company; as my fishnet style corsets from other brands have also eventually had grommet issues. If panel 6 were made entirely cotton twill and the grommet system were reinforced perhaps with one more layer, the grommets would have less chance of pulling out. But again, I’m not personally faulting Glamorous Corset, because to my memory, all of the curvy fishnet OTR corsets I’ve owned for 3+ months, regardless of the brand, had at least one grommet pull out.
Whether you go for the mesh or another finish for the Lara Underbust, Rachel from Glamorous Corset has generously provided a discount code for my followers.
Have you tried this mesh corset or another mesh piece from Glamorous Corset? What do you think of it? Leave a comment down below!