Posted on Leave a comment

Glamorous Corset “Emma” Mesh Underbust Review

This entry is a summary of the review for the “Emma” underbust corset in black mesh, made by Glamorous Corset. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:


Fit, length Center front is just short of 10.5 inches long, the princess seam is 10 inches, the side seam is also 10 inches and the center back is 11.5 inches long.
Rib spring is 6″, hip spring is 6″. The waist does tend to run a bit large / expand in mesh corsets. Offers a gentle (modern slim) silhouette.
Material The mesh parts are single layer hexagonal-hole “fishnet” style netting (seemingly industry standard for OTR). The front and back panels, boning channels and binding are all black cotton bull denim (a coarse weave twill).
Construction 5-panel pattern (10 panels total). Mesh panels were assembled together, and seams were sandwiched by boning channels on the outside and inside. The channels straddle the seams and reinforce the seams.
Waist tape One-inch-wide waist tape made from single-faced satin ribbon, stitched on the inside of the corset and secured at boning channels. Full width (extends from center front panel to center back).
Binding Matching black cotton twill, machine stitched on both sides. The front was stitched in the ditch and the back has a top stitch. 4 garter tabs (2 on each side).
Modesty panel 5.5 inches wide, unstiffened, made from 2 layers of black cotton twill. Attached to one side of the corset with a line of stitching (easily removed if desired). In the front, there is a ¼ inch wide modesty placket, also finished in black cotton.
Busk 9” long, with 5 loops and pins, equidistantly spaced. Heavy duty busk (1″ wide on each side) with an additional ¼” spiral steel bone adjacent to the busk on each side.
Boning 22 bones total in this corset, 11 on each side. Double boned on the seams with ¼ inch wide spirals. The bones adjacent to the busk are also spiral steel. The bones sandwiching the grommets are flat steel (probably stainless steel).
Grommets There are 24, two-part size #00 grommets (12 on each side). They have a small / medium flange and are spaced equidistantly, and finished in silver. Only a few splits on the underside of the grommets, and due to the choice in laces, they don’t catch much.
Laces The laces are black, ¼” wide flat nylon shoelace. They are a bit springy, but they hold bows and knots well and they are long enough.
Price Available in sizes 18″ up to 40″ closed waist.
Comes in black mesh, white mesh, and 4 shades of satin.
Sizes 18″ – 28″ are $79 USD, and sizes 30″ – 40″ are $84 USD.
Only available on the Glamorous Corset website here.


Final Thoughts:

Emma Mesh underbust (available in black mesh and white mesh), model unknown. $79-$84 USD. Click through to visit Glamorous Corset.

The Emma corset is a mid-length mesh corset that offers gentle waist reduction. If you have a seated torso length that is less than 10 inches, you may be more comfortable in their shorter “Bella” mesh cincher, and if you prefer a curvier, longer corset, their “Jolie” longline may suit your preferences.

The mesh is the OTR standard “fishnet” type cotton netting, which offers breathability and quite a lot of flexibility, while the sturdy double boning adds body and rigidity to the corset for posture support and vertical tension. Do keep in mind that because the mesh can expand, this mesh corsets (like other mesh corsets) can expand 1-2 inches when worn (I find this is true of nearly all OTR corsets with this kind of fishnet material, regardless of the brand), so if you’re looking for a specific waist reduction, you may need to go one size down from your usual size – but ensure that your ribs and hips will fit that smaller size as well.

One viewer on Youtube asked about the similarities and differences between this Emma corset compared to True Corset’s mesh cincher, which I reviewed a few years back. For the similarities, both corsets have the same number of panels, and the top and bottom edges are cut straight across in a similar way, and the type of mesh / fabrics used are comparable, but that’s where the similarities end. The measurements are different (in the True Corset, the rib spring is +5 inches, and the hip spring is +8 inches. In this Emma, the rib spring and hip spring are both +6 inches). The Emma also has a slightly different construction technique (double boned, and the boning channels seem to be reinforced as well) – and because of the heavier boning, it lends a smoother, more mild silhouette than the True Corset. If I recall correctly, True Corset dipped or sealed their steels in a kind of shrink tubing, whereas in the Emma corset, they used cotton channels on inside and outside.

Find the Glamorous Corset Emma and other mesh corsets in Glamorous Corset’s shop here.

Do you have the Emma corset, or another piece from Glamorous Corset? Let us know what you think of it in a comment below.