Tag: iridescent

Posted on by — 24 Comments

Contour Corsets Review (Summer Mesh Underbust)

This entry is a summary of the review video “Contour Corsets Summer Mesh Underbust Review” which you can watch on YouTube here:

Fit, length Front is about 12.5 inches long, back is 13.5″ long. Unique silhouette in which the ribcage mostly follows the natural contours, tapering a bit through the lower ribs, but nips in dramatically at the waist for an extreme hourglass shape – almost wasp-waist in silhouette. I had requested this type of ribcage – if you prefer a more natural shape, this can be accommodated. This is called a “mid-hip” cut; coming slightly over the iliac crest but not longline. Extreme hipspring. See the “Final Thoughts” section on other fitting notes.
Material Primarily one layer of very strong, almost no-stretch poly mesh. I chose the “gold” color to match my medium-olive skin tone (it’s a cross-weave of a light yellow and deeper pinkish-copper). Despite being synthetic, the holes in the mesh allow my skin to breathe. Still, I always wear it with a liner underneath. Boning channels and binding are made from somewhat matching light-brown twill.
Construction 6 panel pattern, with most of the hip-curve between panels 3-4. At least triple-stitched: Lock-stitching between panels, seam allowances pressed open and zig-zag stitching to further stabilize the seam, then external boning channels, double-boned on the seams (external channels often contribute to an even stronger seam). No garter tabs (not requested).
Binding Brown twill that matches the boning channels; machine stitched inside and outside.
Waist tape None. This corset is strong enough without a waist tape, and in fact stronger than many of my corsets that do contain waist tapes. (I admit I had my doubts, but this corset has been tried and tested for nearly a year.)
Modesty panel 4″ wide stiffened modesty panel (lacing guard) in the back, suspended on the laces. 1″ wide modesty placket under the front closure, with a very heavy flat steel bone (essentially a boned underbusk).
Front closure Not a busk! The front closure is a “stayed zip” – heavy duty metal YKK zipper, secured into twill panels with the mesh overlayed. A 1/2″ flat bone is on either side of the zipper, and a 1/4″ flat bone sits on top of either side of the zipper as well. The very stiff and heavy 1″ underbusk further stabilizes the zipper so it doesn’t buckle. This has been my first tightlacing corset with a zipper and I’ve had no isssues with it.
Boning 29 total steel bones. On each side, there are 10 bones in external channels, then 2 flats on either side of the grommets in the lacing system, as mentioned before another 1/2″ steel beside the zipper, another flat bone on top of the zipper, and the last 29th bone is the heavy underbusk underneath the zipper.
Grommets 26 grommets total, size #0 two-part grommets with a large flange; set closer together at the waistline; high quality – no splits, no wear/fraying/pulling out of grommets
Laces I opted for the heavy-duty lacing; nylon braided shoe-lace style laces; they’re thin, they grip well and they are long enough. Very easy to lace up; they glide through the grommets well but hold their bow tight. Zero spring.
Price The Summer Mesh underbust costs between $520 – $575 at the time of this review. The price depends on the size and other considerations (see below). Asymmetric patterns (for those with scoliosis, etc) add $100. You can see her full price list here.

Final Thoughts:

When I first recorded the review and did the “first edit”, it was nearly 20 minutes long because I had so much to say about this corset. It is like no other corset I’ve had before, so even for a review such as mine (which is on its own pretty objective, but still comparable if you read across the tables of different reviews on this site), it can’t really be compared to other corsets in my collection. The posture, the materials, the construction, the pattern/ silhouette – everything  about this corset is just… different. Be prepared for a really long discussion (and as model KathTea had once said, “If this is tl;dr then corseting is probably not for you”).

Continue reading Contour Corsets Review (Summer Mesh Underbust)

Posted on by — 1 Comment

Waisted Creations Underbust Corset Review

This entry is a summary of the review video “Waisted Creations Underbust Corset Review” which you can watch on YouTube here:

Fit, length Front is about 12 inches long, and the shortest part (from underbust to lap) is 9″. Unique silhouette in which the ribcage follows the natural contours but nips in dramatically at the waist for an extreme hourglass shape. Hips end a little lower than the iliac crest and very rounded. Luthien specializes in extreme hip springs, so this shape would be comfortable for hourglass or pear-shaped corseters. This corset was made to measure.
Material Fashion layer is dupioni silk in “dragonfly”; backed onto cotton coutil; lining is lightweight printed cotton.
Construction 6 panel pattern. Top-stitching between panels, many bones sandwiched between the layers, and a floating liner. No garter tabs. One of the seams at the waistline did rip, but has held up well after mending.
Binding Matching dupioni silk, machine stitched outside and hand-finished inside. Slight frayed area in the top edge of the binding, but I will be fixing that later.
Waist tape 1/2″ wide invisible waist tape between the interlining and lining.
Modesty panel None. (Not requested.)
Busk Heavy-duty wide busk (1″ wide on each side) about 11″ long (5 pins).
Boning Heavily boned; 34 steel bones not including busk. Most of the ones around the side are spiral steel; double boned on the seams and additional bones in the center of the panels. Another two steel flats sandwiching the grommets on each side at the back.
Grommets 26 grommets total, 5mm two-part Prym eyelets with moderate flange; set equidistantly; high quality – no splits, there are some that didn’t roll perfectly, but there is no fraying/pulling out of grommets.
Laces Strong cotton braided shoe-lace style laces; they’re thin, they grip well and they are long enough. Very easy to lace up. Zero spring.
Price At the time of recording this video, a made-to-measure, unembellished underbust corset is £200 (about $310) and overbusts start around £300.
This is how the corset fits with a wider lacing gap in the back. The flaring dissipates when the corset is laced closed.

Final Thoughts:

This corset was used in my “corset seasoning” mini series a number of weeks ago – anyone who had watched those videos will know that this review doesn’t tell the whole story of my ups and downs with this corset. I was originally upset that my mini series didn’t run as smoothly as anticipated, but over time I’ve come to agree with viewers that a “perfect” seasoning process wouldn’t have been half as useful, as I wouldn’t have been able to show people what is normal wear and what is atypical during seasoning, or offer troubleshooting/ solutions to issues as they were encountered. You’re welcome to learn more about how this corset wore in over time by reading or viewing the mini series here. (I do promise to catch up on the written versions!)

Much of this corset was left to the creative liberty of the maker. I had provided my natural measurements, gave suggestions of silhouettes and shapes that I liked, and requested a specific silk from Silk Baron. At the time that I received my mockup to test the fit, the maker mentioned that she was not able to get the specific colour of silk I wanted, and offered some complimentary embellishment as compensation. The change in colour was subtle and I didn’t need to match the corset with a pre-existing skirt or anything, so this wasn’t a huge issue for me at the time. I chose the gold lace to go along with the shade of green silk provided. The crystals/rhinestones weren’t discussed; they were a surprise. Once again, not a huge issue for me, but if you are the type to want to know exactly what you’re receiving, please be very specific before ordering.

The turnaround time of this corset was approximately 5 months, which is a longer duration than I’ve experienced from other corset makers – there seem to have been some complications, and the maker is very busy. If you plan to commission a corset, be sure to contact her at least 6 months ahead of time, in order to give your corset a proper break-in session prior to your event. She mentions that at the moment she is not accepting new orders, but she normally only accepts commissions on an extreme case-by-case basis.

Posted on by — 1 Comment

Puimond PY06 Iridescent Pearl Plunge Overbust Corset Review

This entry is a summary of the review video “Puimond Iridescent Pearl Overbust Review ” which you can watch on YouTube here:

Fit, length Front is about 12 inches long, back is 13″ long. From waist to underbust is 4-5″, waist to peak of bust is about 10″. Unique silhouette in which the ribcage follows the natural contours but nips in dramatically at the waist for an extreme hourglass shape. Hips are cut high; not a problem for pear shapes. Recommended for extreme hourglass ladies. Exaggerated plunge neckline; I recommend using double-sided/ toupee tape if your breasts tend to migrate.
Material Fashion layer is pearlescent vinyl; backed onto cotton; lining is cotton coutil.
Construction 6 panel pattern. Lock-stitching between panels, external boning channels in the middle of the panels, and a floating liner (very comfortable). 6 garter tabs.
Binding Matching pearl vinyl, machine stitched inside and outside; trimmed short instead of folded under on the inside (typical treatment of leather/ pleather binding)
Waist tape 1″ wide invisible waist tape between the interlining and lining.
Modesty panel None.
Busk Heavy-duty wide busk (1″ wide on each side) about 11″ long (5 pins).
Boning 10 steel bones not including busk. On each side, there are 3 bones in the middle of the panels (feels like spiral) and another two steel flats sandwiching the grommets at the back.
Grommets 26 grommets total, size #00 two-part grommets with moderate flange; set equidistantly; high quality – no splits, no wear/fraying/pulling out of grommets
Laces Strong cotton braided shoe-lace style laces; they’re thin, they grip well and they are long enough. Very easy to lace up. Zero spring.
Price The PY06 is advertised as $450 for fabric and $570 for leather/vinyl. You can see the options on his website here.
Puimond plunge overbust in pearlescent PVC, (straps detached). Model: Lucy (me!). MUAH: Stella Amore. Photo: Trillance.

Final Thoughts:

This was my first couture corset purchase back around February of 2011. I have since purchased another Puimond overbust (PY15) which is constructed differently, and fits totally differently as well. For anyone who may have gotten the impression that I was complaining about the fit of this corset, please note that Puimond is not at any fault – he is a very well-respected designer in this field.

I’m more upset that my torso length doesn’t fit the corset, as opposed to the corset not fitting me. This particular corset was not made to my particular measurements; it has been around for many years and been worn by at least 4-5 different people. It’s held up surprisingly well over time, all things considered. I’m very excited to review my second Puimond corset in the future, as it shows how Puimond alters his construction techniques based on fabrics used and silhouette he’s going for – not all “Puimonds” are the same!

To see Puimond’s other styles, do visit his website here.