This entry is a summary of the review video “Vollers 1808 Velvet Overbust Review”. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:
|Fit, length||Center front is 13.5 inches, the apex of bust to the bottom is almost 17 inches. Comes a bit over the upper hipbones, and the bust is deliberately cut high. My bust is secure as the fabric comes up and over much like a bra cup does. Gives very gentle curves, only nips the waist in 2 inches on me.|
|Material||100% cotton velvet on the outside and a poly-cotton twill on the inside.|
|Construction||4 main panels. Stitching between panels is topstitched, bones are in internal twill boning channels.|
|Binding||Velvet ribbon, machine stitched on front and back.|
|Waist tape||None. Vollers recommends you order the corset 2-4 inches smaller than your natural waist.*Addendum: This particular style doesn’t come with a waist tape because the velvet has a tendency to stretch, and so the waist tape would eventually cause a ridge that is smaller than the rest of the corset, where the waist tape lays. However this style apparently does come with a waist tape if another fashion fabric is chosen.|
|Modesty panel||Back lacing protector is unstiffened and sewn onto one side of the corset, velvet outside and twill inside. There is a modesty placket underneath the knob side of the busk, made from twill.|
|Busk||Standard flexible busk, 12″ long and ½ inch wide on each side, with 5 pins. There’s another ½ inch wide bone on either side of the busk, sewn invisibly in probably in the seam allowance. This stiffens the front but you can’t see the stitching for it. Additionally, there’s a hook-and-eye hand sewn at the top to prevent the bust area from gaping.|
|Boning||14 bones total in this corset. There are 8 spiral bones (4 on each side), and 6 flats. Like I said before, there’s a ½ inch wide flat on either side of the busk, and in the back there are ¼ inch wide flats sandwiching the eyelets.|
|Grommets||They don’t use grommets, they use 1-part eyelets. There is no washer on back and the eyelet is perforated to split. Vollers says these eyelets are used in heavy boots so will take quite a bit of stress without pulling out.|
|Laces||about half centimetre wide black flat shoelace style laces which are tightly braided. They’re slippery through the eyelets but the laces grab onto themselves so the bow doesn’t slip out easily. Resistant to catching or fraying.|
|Price||Varies greatly with materials used: £195 ($306 USD) in the velvet finish, £165 ($260) in satin finish, £215 ($338) in sequin fabric.|
What to say about this corset? A lot of different parts in this corset I either loved or wished were different, and not much middle ground.
Parts I LOVED
The fit of the bust. It was incredible. This was one of the very few overbust corsets I tried that not only gives a daring plunge in the center but also the cups of the bust comes up and over the breast, holding it firmly in place with almost no chance of popping out. It gave a wicked 1/4 side view. I also loved the neat construction of the busk and supporting “invisible” bones. The hook and eye at the top of the bust was a really nice touch. I also loved the quality of the bones and the laces.
Parts I wished were different
Although I loved the fit of the bust, I wished that there was more contrast in the waist. If I were to order this corset again I would probably have gone for a custom fit so I could achieve a greater waist reduction. On the other hand I’m not entirely certain that the corset would have withstood more tension because there was no waist tape. I wished that there were a waist tape in this so I’d feel safer about achieving greater reductions. And even though the 1-part eyelets stayed put nicely and never frayed for me, I would have just psychologically felt more comfortable with 2-part eyelets or grommets. I have to wonder if the eyelets gripped onto the velvet better than other materials, since it’s more plush. Had I ordered the brocade or satin, would the eyelets have held up as well? I will give them the benefit of the doubt and say that their eyelets should grip any and all fabrics as long as they are set as well as they had been in mine.
A note on corset/ hair compatibility
Although it’s not at all the fault of the makers whatsoever, in retrospect choosing the velvet was a bad idea just because of my hair. Velvet loves my hair and my hair loves it. Therefore whenever I wore this corset with my hair down, my hair would wrap all around me and I would soon become entangled. Therefore I only recommend a velvet garment for someone with shorter hair or one who tends to wear their hair up.