Posted on 2 Comments

Corset Connection (Versatile Corsets) Dita Underbust Review

This entry is a summary of the review video “Versatile Corsets Dita underbust Review” which you can watch on YouTube here:

Fit, length Front is about 12 inches long, from underbust to the lap at the “princess seam” (the side-front) is 9 inches long – appropriate for average-to-long torsos. The bottom of the corset swoops down to cover lower-tummy pooch. This is not a longline corset; it’s cut higher over the hips at the side.  Modern slim silhouette, reminiscent of the traditional Victorian hourglass silhouette, except with gentler curves. Also includes a halter strap (see the Final Thoughts for more info). This corset can accommodate about a 9-10 inch hip spring, and the ribs are about 6″ larger than the waist.
Material 2 main layers: the lining is 100% cotton black twill (although custom commissioned corsets from Versatile will contain herringbone coutil lining). Fashion fabric is a medium-weight pink satin (interfaced for strength) with black accent boning channels and binding made from black shiny pleather.
Construction 5 panel pattern. Twill lining is flatlined/rollpinned to satin fashion layer; top-stitching between panels (seams are double-stitched at minimum), external boning channels. Also contains 8 garter tabs.
Binding Black binding that matches the external boning channels, made from bias strips of black PVC, trimmed short on the inside rather than folded under (this is typical of leather/ pleather binding, and fine because it won’t fray).
Waist tape 1″ wide petersham waist tape exposed on the inside. If you had ordered a corset without external boning channels, then the waist tape would be sandwiched between two layers of material.
Modesty panel Attached 8″ wide fabric lacing protector on the back, covered in matching pink satin (more breathable than the PVC or pleather), stitched on one side of the corset; unstiffened placket under busk made from matching black PVC.
Busk Standard flexible busk (1/2″ wide on each side) about 11″ long (5 pins), reinforced with a flat steel bone on each side.
Boning 22 total bones not including busk, all flat (spring) steel bones. On each side they are double boned on the seams (1/4″ wide), 2 sturdier flats sandwiching the grommets and another flat bone beside the busk.
Grommets 24 grommets total, size #00 two-part grommets with moderate flange; set equidistantly, no splits, no wear/fraying/pulling out of grommets. This type of grommet is my personal favourite used in American-made corsets.
Laces 1/8 inch wide round nylon cord – strong, virtually unbreakable, not stretchy, glides well through the grommets and doesn’t catch, but they’re slippery.
Price Currently $358 USD for the standard size and basic fabric on the Versatile website. For contrasting channels, there is no price markup!

Final Thoughts:

This is the third of several corsets I will be reviewing for Versatile Corsets/ Corset Connection. The samples were originally agree to be sent back, but the owner of Corset Connection asked me to sell them here on my website (90% funds still go to Versatile) instead of sending them back.

I don’t often wear materials like pleather or PVC because I find it doesn’t breathe very well – however, since the main fashion fabric is satin and the pleather is just contrast, this style is a bit more comfortable. Still, if I were to go back and order this piece custom, I would likely have chosen a different fabric combination. The perk to Versatile Corsets that I have not seen in any other company – if you want external boning channels, there is no mark-up in price! You can also choose from dozens of fabric and colour choices for the binding, trim, and channels – or make them all different colours or fabrics if that’s your preference. There are many different possibilities!

The thick halter strap was comfortable around my neck; it was covered with black pleather/ PVC material to match the binding and boning channels, and was adjustable with hooks and eyes (similar to bra hooks). I didn’t personally find that the straps pulled too much on my neck, and I was able to keep my shoulders and my neck back – however, for those with forward-head posture looking for a solution, this corset will not miraculously help. I like how the fabric of the corset wraps up and around the side of the torso, which both helps to flatten any breast tissue that wraps around the side and in the armpits, and for those with smaller busts this cut helps to lift the bust and push it together to create cleavage. 

Overall, I am glad I had the opportunity to try on this corset. I find the Dita underbust to be much more suited to my figure, as I have a longer torso. It’s a great corset for lengthening the line of the torso, thanks to the vertical contrasting boning channels, and the swooping line of the lower edge down to the pubic bone. It makes me look much leaner and taller compared to the Snapdragon cincher that I reviewed before – however, those with shorter torsos may prefer the Snapdragon for its length. The one perk is that both the Dita and the Snapdragon corsets are the exact same price, so neither the taller nor the shorter lacer has to worry about paying more for the style that suits them. To see other models in the Dita corset, Versatile has a small gallery so you can see how it fits different people. You can see it on their website here.

Posted on Leave a comment

Corset Connection (Versatile) Lotus Overbust Review

This entry is a summary of the review video “Versatile Corsets Lotus underbust Review” which you can watch on YouTube here:

Fit, length Front is about 16 inches long, from peak of the bust (longest part) is 18 inches long. Slim silhouette. This is not exactly a longline corset, most of the length is from the waist up so it cups around and covers the bust quite well. Suitable for people with longer waists. The cups may accommodate up to an E cup. However the back was a bit small on me, so this corset may be suitable for those with a larger bust and smaller ribcage. This corset can accommodate about a 12-inch hip spring
Material 3 main layers: the lining is 100% cotton black twill (although custom commissioned corsets from Versatile will contain herringbone coutil lining). Fashion fabric is a heavyweight pink glitter PVC with black accent boning channels.
Construction 5 panel pattern. Twill lining is flatlined/rollpinned to PVC fashion layer; top-stitching between panels (seams are double-stitched at minimum), external boning channels. Also contains 8 garter tabs.
Binding Black binding that matches the external boning channels, made from bias strips of black PVC, folded under on the inside
Waist tape 1″ wide petersham waist tape exposed on the inside.
Modesty panel Attached 8″ wide fabric lacing protector on the back, covered in black satin (more breathable than the PVC or pleather), stitched on one side of the corset; unstiffened placket under busk made from matching black PVC.
Busk Standard flexible busk (1/2″ wide on each side) about 12″ long (6 pins), reinforced with a flat steel bone on each side. An additional 3″ on top of the busk contains grommets to adjust the bust area.
Boning 20 total bones not including busk, all flat (spring) steel bones. On each side they are double boned on the seams, 2 sturdier flats (1/4″ wide) sandwiching the grommets and another flat bone beside the busk.
Grommets 32 grommets total, size #00 two-part grommets with moderate flange; set equidistantly, no splits, no wear/fraying/pulling out of grommets. This type of grommet is my personal favourite used in American-made corsets.
Laces 1/8 inch wide round nylon cord – strong, but slippery.
Price Currently $398 USD for the standard size and basic fabric on the Versatile website. For the glitter PVC, there is a $60 markup.

Final Thoughts:

This is the third of several corsets I will be reviewing for Versatile Corsets/ Corset Connection. The samples were originally agree to be sent back, but the owner of Corset Connection asked me to sell them here on my website (90% funds still go to Versatile) instead of sending them back.

As I mentioned in the video review, this corset passes the bust test with flying colours. There is little-to-no chance of boobling out of this corset, even if you have a long torso, because this corset is so high from waist to

The exact same Lotus overbust on another model with a different body shape, for comparison.

top edge, and the cups are very nicely shaped and they curve up and over the breast to encapsulate it, not just squish it. Despite the fact that this is a relatively modern slim silhouette, I felt like a Barbie doll in this corset (and not only from the pink!). The bust area can accommodate close to a DD/E cup size (as long as the ribcage in the back is relatively small) and the hips accommodate a relatively generous 12-inch hipspring which is indicative of other corsets that are considered quite curvy. Perhaps the length of this corset gives the illusion of “diluting” the curviness.

If I had ordered the Lotus overbust custom made, I would request to have the back just about 2 inches larger to accommodate my ribcage and keep in my back fat/ muffin top. I would likely have ordered it in a lovely brocade instead of PVC – as fun as pink, shiny, glittery plastic can be, I don’t do well with non-breathable synthetic fabrics.

 The Lotus corset (like all the other corsets by Versatile) is available in various colour combinations as you can choose the main fabric, have a choice of lace overlay if you wish, then at no extra charge you can choose a different fabric or colour for the trim, external boning channels, and binding – they can all be different fabrics if you wish! I’m glad that I had the opportunity to see the differences in construction between the various different corsets depending on the styling choices.

Overall, I am glad I had the opportunity to try on this corset; I think of all the Versatile overbusts I’ve tried, this one was my second favourite (next only to the Mimosa cupped overbust). To see other models in the Lotus corset, Versatile has a small gallery so you can see how it fits different people. You can see it on their website here.

Posted on 2 Comments

“Disco Armadillo” PVC Ribbon Cincher Case Study

This entry is a summary of the video “‘DISCO ARMADILLO’ PVC Ribbon Corset”. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

***

This was my first attempt at sewing a corset from vinyl. I have to thank Marta “Snowblack” for her wonderful  Foundations Revealed tutorial on sewing leather and vinyl corsetry. Just a few things that I have learned about handling vinyl:

  • The material stretches (so you must back it with coutil) however it does not drape like most other fabrics.
  • It is also not a self-healing fabric, and will show all pinpricks. Therefore you should pin your panels only in the seam allowances.
  • Using a teflon foot (or a piece of tissue between the vinyl and the presser foot) will help the vinyl to feed smoothly without dragging or sticking to the presser foot.
  • Lastly, feed dogs will leave permanent marks into the bottom of the vinyl, especially if it has a metallic foil finish. Putting tissue or masking tape on the underside of your fabric (where your seam line will be) will protect your fabric from the feed dogs digging in.
***

Here is the overview of my Disco Armadillo, in typical review form:

Fit, length Center front is 10.5″ high, and I drafted this corset to be very curvy: underbust about 32″, closed waist 24″ and hips 34″.
Material Just two layers; the outer PVC ribbon and the inner coutil.
Construction 5-panel pattern – three vertical panels at front/side/back to hold the bones, and two ribbon panels. I learned how to draft a ribbon corset from Sidney Eileen’s ribbon corset sewing tutorial. The coutil panels aren’t “ribboned” like the outer pieces; rather they are in one piece. Most seams are topstitched as I was afraid that lockstitching would cause the PVC to become too perforated and tear apart. However at the busk, seams were lockstitched nonetheless as it looked better. Some edges of the ribbon were left raw, as folding those edges under would be too bulky.
Binding There is binding at the top and bottom of the vertical panels only; the ribbon panels do not have binding. I also left the inside edge of the binding raw – this is normal with binding made out of leathers or vinyls.
Waist tape Ribbon corsets typically don’t have a waist tape; a horizontal piece of ribbon running around the waist will act like a waist tape anyway.
Modesty panel I didn’t make a modesty panel for this corset because I designed it to close completely at the back.
Busk A standard flexible busk, 1/2” wide on each side, with 5 pins, 9.5″ long. Although it is quite flexible, having 3 layers of PVC ribbon surrounding the busk makes the front panel quite stiff and sturdy.
Boning Only 8 bones total in this corset (not including the busk), only boned on the vertical panels. There are two spring steel bones sandwiching each row of grommets at the back, and an additional two bones on each side panel, all 3/8″ wide.
Grommets There are 20 2-part size #00 grommets (10 on each side). I used self-piercing grommets and a new press to insert these, and they work very well with the PVC. I placed a layer of heavy canvas in the grommet panel to give the grommets more to “grab onto” and to prevent the PVC from stretching. There are no splits and the grommets are holding up quite well with regular use.
Laces I used some 100% nylon purple paracord – it’s extremely strong (holds tension up to 500 lbs) and has no stretch, is resistant to fraying but has a tendancy to twist. You will definitely need a square knot or bow (not a round one) to keep your corset securely tied at the back.
Price Ribbon corsets in general are not particularly difficult but they are time-consuming and require a bit of pre-planning. I would most likely place a typical satin-and-coutil ribbon corset at around $150. However, because the PVC ribbon is extremely challenging to work with and also quite expensive ($10/meter when not on sale, and this corset used 9 meters), I wouldn’t remake this corset for less than $250.