This entry is a summary of the review video “Stormy Leather Lombard Overbust Review” which you can watch on YouTube here:
|Fit, length||This corset is custom fit (made to measure), so a corset for you may fit differently. Center front is about 16 inches high, and there are adjustable shoulder straps so there is no real point where the bustline “peaks”. Measurements of the size Small: Waist 22″, underbust 26″, full bust 28″, high hip (iliac) 32″. Gentle hourglass, slightly 18th-century-inspired hybrid.|
|Material||1 layer of unlined leather. While this corset does pull me in, the website mentions to expect the regular leather to stretch a couple of inches over time with regular use. The center-front panel is treated (patent leather), so less stretchy than the other leather.|
|Construction||5 panel pattern, very flat front. For assembly, there is nothing to flatline as it’s a single layer. Panels were stitched together, with internal cotton boning channels straddling each side of the seams for extra strength, while at the same time covering the seam allowances. Single boned on seams.|
|Binding||Matching strips of leather, machine stitched on outside and inside (stitched in the ditch). Inside has a raw edge (normal for leather binding) but edges were not folded over, rather just cut off at the corners.|
|Modesty panel||Back modesty panel is 4.5 inches wide, continuously boned with six 1/2″ wide steel bones. Finished in leather, stitched to one side. Front placket is a single layer of patent leather.|
|Busk||14 inches long, standard width busk (half inch on each side) with 7 knobs and loops, equidistantly spaced.|
|Boning||10 bones total (5 bones per side). All 1/2″ wide flat steel bones, single boned on the seams, and in the back by the grommets there is only a single bone in the center back edge (not sandwiched on each side).|
|Grommets||26 two-part grommets, size #00, large flange, held in strongly, set equidistantly. Nice washers, grommet rolled on the back with no splits.|
|Laces||The original laces were 1/8″ wide round nylon cord, too slippery and frustrating to use so I switched it out with some longer, gripper flat laces.|
|Price||At the time I’m writing this, the silk/satin version is $380 while the leather version is $409.|
This corset was admittedly not purchased directly from Stormy Leather’s website (so I’m not sure about the quality of their customer service), but I had found this piece at discount from a previous owner and had verified that this was indeed a genuine Stormy Leather style. This corset intrigued me as it seemed to have a slight 18th-century-stays inspired style or silhouette – the very flat front, straighter bustline and conical ribs seemed to be a nod towards an almost “Marie Antoinette” style, and had this corset been made from a light-coloured linen or cotton, and tied at the shoulders with ribbons instead of buckles, this corset certainly would have passed as modernized, hybrid stays (it has more of a hip curve and no tabs at the bottom edge compared to reproduction stays). Nevertheless, the pattern of the corset didn’t work with my body.
For a relatively simple 10-panel corset, there is a lot going on in it: the leather gives it a tough ‘biker’ or nightclub look – yet if you choose, you can thread a pretty pastel-coloured satin ribbon through the decorative grommets in the front panel to soften it and create a juxtaposition. The shoulder straps are adjustable based on your body type and comfort level, and the incorporated roller buckles makes sure that the leather doesn’t get damaged from stress/ abrasion.
The continuously-boned modesty panel is one of my favourite parts of this corset, as it laid nice and flat as I was lacing up – it didn’t wrinkle or warp, and although I had quite a large lacing gap, I felt fully supported partially thanks to the structure of this panel.
If you would like to learn more about the Lombard corset, check out Stormy Leather San Francisco’s online store (NSFW).