Posted on 31 Comments

The Corset Gap: What does it mean?

This entry is a summary of the review video “Shape of your Corset Gap – What does it mean?” which you can watch on YouTube here:

 Shape/ meaning

Brands to avoid for your body type

Brands to consider for your body type

A shape

The A Shape
The A shape

This means that your hips are too wide for this corset pattern. This type of gap is common for women who are naturally a pear shape. Do NOT try to force the hips smaller because then you may get an odd bump at the lower edge of the corset, and it can also make your hips go numb.

Avoid any corsets that say “modern slim” silhouette or “gentle curves.” This may include any of the “Level 1” corsets from Orchard Corset, or the underbust corsets from Corsets-UK. For those who have a larger hipspring, look for corsets for vintage figures: What Katie Did or Isabella Corsetry are good choices. They have a hipspring of more than 12-14 inches.

V shape

The V shape
The V shape

This means that your ribcage or shoulders are too broad or fleshy for the corset. While it is possible to train down your ribcage, it’s unlikely that you can train it right from the very top edge.  This often occurs in swimmers or in men who wear women’s corsets.

Corsets that have a relatively narrow ribcage, which include some WKD underbusts. For standard corsets with a larger ribcage, try Timeless Trends and the CS-426 from Orchard Corset.

() shape

The () shape
The () shape

This is when you have gaping at the waist – the bones in the back are either too flexible, or the waist is too small than you’re ready for. This CAN ruin the corset because it’s forcing the bones to twist in their channels. It can even make the bones kink outward or inward into your back, which is quite uncomfortable.

Avoid corset patterns that are curvier than you are ready for. If you have a very “unyielding” figure, you may have to train down before buying corsets like WKD or Isabella.  I’d recommend you start with a larger corset size, or go for a corset that makes more gentle/ natural hourglass or slim silhouettes like Timeless Trends.

)( shape

The )( shape
The )( shape

This is when your body is more of an hourglass shape than the corset itself! The corset doesn’t have enough curve in it. BEWARE of this common trick on websites! They will use models who are naturally quite curvy and this will make their corsets curvier. A corset that is modelled with a gap like this in the back will likely look more tubular when it’s laced straight.

Avoid any corsets that say “modern slim” silhouette or “gentle curves.” This may include any of the “Level 1” corsets from Orchard Corset, the underbust corsets from Corsets-UK. Try What Katie Did Morticia corset, the Curvy Girl corset from Azrael’s Accomplice, or several options available from Isabella Corsetry or Ms Martha’s corset shop.

//

Screen Shot 2013-12-14 at 2.33.47 AM
The // shape

A diagonal but fairly parallel gap means that the corset fits your ribcage, waist and hips reasonably well but it is twisting on the body. There are several reasons why this may be happening: 1. If the corset is made with twill and all of the panels have the twill running in the same direction. Twill, while strong, has an asymmetric weave so stretches more on one bias than another. To test if your corset has stretched differently on either side, measure the ½ circumference on each side of your corset at ribcage, waist and hips. See if both sides are equal. 2. It may just have been how you put the corset on that day! Always lace in front of a mirror to avoid tying it skewed. If you notice your corset is twisted, take it off immediately and put it on again straight. It is possible for a corset to season into a permanent twisted shape! 3. It may not be the corset, but rather your body that is asymmetric. If you have any of the following then this can make a symmetric corset look asymmetric:

  • scoliosis
  • a previously broken rib
  • one leg longer than the other
  • some other skeletal or muscular asymmetry
In the first situation, I recommend not buying corsets made with twill – or if they are made with twill, make sure the corsetiere is experienced enough to sew it perfectly on grain, and to flip every other panel so that the bias of all panels don’t run in the same direction.Also, as bad as it sounds, avoid “risky investments.” Ensure that your corsetiere is scrutinous about making each half of the corset the same way, and to specification (whether symmetric or asymmetric). In the last situation (physical asymmetry), I strongly suggest finding an experienced corsetiere who can fit you with an asymmetric corset, which will then end up looking symmetric on you!

 ||

This is the coveted vertical parallel gap! Some people prefer to have no space in the back, while others like about 2 inches of space so the back edges don’t touch the spine. Either way, your corset fits you well. Congratulations!

 Make sure that your corset is not too big for you; when the corset is closed there shouldn’t be any significant gaping between your ribcage and the top edge of the corset, or your hips and the bottom edge of your corset.  You’re very lucky, my friend! If  You’ve found an off-the-rack corset that fits you nearly as well as a custom corset. If it makes you look good and feel good, then take it and run!

Final Thoughts: Many people have no problem with the shape of their corset gap (after all, the wearer doesn’t have to see it!). If this is you, then continue rocking your corset just the way you like it. However if you, like me, are a little more conscientious about achieving the vertical parallel lines of a well-fit corset, I hope these suggestions can help you choose a better off-the-rack corset for next time – and if all else fails, go custom! If you enjoyed this article, or even if you need clarification, you may also like my “Addendum to Corset Gaps: Troubleshooting More Fitting Issues

Posted on Leave a comment

Comparison/ Double review! Leatherotics 1811 vs Chinese-made Ebay Corset

This entry is a summary of the review video “Comparison: Leatherotics 1811 vs Budget Ebay Corset” which you can watch on YouTube here:

Leatherotics Corset

Chinese Ebay Corset

Fit, length About 12 inches high; very straight busk that does not bow outwards. Gives a very gentle silhouette. Appropriate for average to long torso length. Center front is about 13 inches high; busk bows outwards a bit, giving the appearance of pooch. Gentle silhouette. Slightly longline compared to Leatherotics. Appropriate for average to long torso length.
Material 2 layers; fashion layer is black polyester satin, and the lining is black cotton twill. Only one layer; a red satin that has a kind of sturdy non-stretch backing.
Construction 6 panel pattern, assembled with a lock-stitch. Internal boning channels. Also has 4 garter tabs.  6 panel pattern, assembled with a top-stitch. Internal boning channels. Also has 4 garter tabs.
Binding Matching black satin (made from bias strips of the same fashion material), machine stitched on both sides, finished cleanly.  A close colour match (but not exact) red satin commercially made bias tape, machine stitched on both sides in one go, finishing is not clean.
Waist tape 1″ wide visible waist tape made of satin ribbon, seen on inside, stretching across all panels and secured down at boning channels.  1/2″ wide waist tape made of grosgrain ribbon, seen on inside, stretching across ONLY panels 3-4-5, leaving the other panels unprotected. Secured down at boning channels. One side has the waist tape wrinkled in a seam.
Modesty panel Attached lacing protector on the back made of two layers (black satin and twill); also includes a placket overtop of the busk to hide it.  Attached lacing protector on the back made of one layer (red satin) and lace around it, also includes a placket under the busk.
Busk Standard 1/2″ wide busk on each side, about 10.5″ long (5 pins). Very sturdy. Wide busk (1″ wide on each side) about 11.5″ long (5 pins), however it’s more flimsy than the Leatherotics busk.
Boning 12 steel bones not including busk. 8 spirals (1/4″ wide)  4 flats (1/4″ wide) sandwiching the grommets.  14 steel bones, all spiral steel bones even on the back by the grommets. Bows and collapses when trying to tighten up.
Grommets 28 grommets total, size #00 two-part grommets with small flange; set equidistantly from eachother and between the two bones; no splits, no wear/fraying/pulling out of grommets  20 grommets total, size #00 two-part grommets with small flange; set equidistantly, except offset towards the last bone at the back edge. Starting to pull out around the waist after only 2 wears.
Laces Strong nylon braided shoe-lace style laces  Strong nylon braided shoe-lace style laces
Price Plain satin version of this is currently £40 in the UK, or $60 USD – and they offer custom sizing, more bones, different fabric/ colours.  Plain satin version of this is currently $35 USD on Ebay, no other options for custom sizing, fabric etc.

 

Final Thoughts:
You get what you pay for! If you just want a simple cheap fashion corset without any waist reduction, OR if you’re looking for a cheap corset just take apart in order to learn how to recreate a corset pattern, then the cheaper corset may suit your purposes. However the Leatherotics brand offers custom sizing – this will give you as much or as little curve as you like. But remember the limits of each brand – if you want to be sure you get a corset made exactly to all of your measurements and specifications, you will have to go with an independent corsetier(e).