Posted on 2 Comments

Buying Used / Second Hand Corsets – FAQ

Over the years I’ve gotten an influx of questions about second hand corsets. Like other used clothing, they tend to be much less expensive and you can occasionally find “unicorns” (rare finds from corset makers who have retired or passed away). But can you trust a used corset to fit well or be as strong as a new corset? Are there any health concerns? Is it gross or shameful to buy second hand? I answer your questions here!

 

 

Isn’t it “gross” or unhygienic to buy a used corset?

I personally don’t see a problem with going gently used, as long as you know that it’s gently used and the previous owner is trying to convince you that it’s brand new – and as long as the corset is relatively clean or not used during unhygienic activities. Many people only wear their corset with a shirt or liner underneath, so technically the corset has never touched the skin on their torso, and the corset may not be any more “dirty” than a blazer.

I buy second-hand corsets where I can (I like discounted clothing as much as the next person), especially if I know the previous owner through the corset community and we’ve already developed good rapport. 90% of my closet is probably from thrift shops like Goodwill or Value Village. There are certain items that I don’t buy used (socks, stockings, underwear or bathing suits), and I will only buy shoes used if they look and feel almost brand new (look at the scuff marks on the soles) and don’t have signs that someone bled in them, for instance.

 

How can I tell if my corset is used or new?

There are differences between gently used and new corsets, the way that there are differences between used and new shoes. Look for the following in a NEW corset:

  • Crispier feel to the fabric, due to the sizing and starch used in the fabric (factories almost never pre-wash their fabric)
  • Stitches are all even
  • Steel bones are all straight, not twisted or warped
  • No wrinkling around the fabric
  • No shifted grommets in the back
  • The laces may feel springy too (if they are nylon OTR shoelace), and they might need to be “worked” a bit before they start gliding through the grommets like it’s second nature.

Used corsets might still show some traits of the above, depending on the construction and quality, and exactly how much it was worn by the previous owner.

 

This antique corset has teeny tiny stitches – about 25 per inch – and would show less shifting of stitches compared to the OTR corsets of today which have around 6-8 stitches per inch.
Corset courtesy of the Symington Museum Collections in Leicester, UK.

How does the construction play a role? A used corset that’s constructed with the sandwich method may show some slight shifting of the threads towards the waistline (where there is the highest tension), whereas with a corset with all external boning channels, this shifting in the stitching is harder to see. It’s also easier to see this shift if a corset has a longer stitch length, compared to if they used a shorter stitch length.

Other changes you can see in USED corsets (applies mostly to OTR corsets):

  • If a corset is very lightly boned with a several inches of unsupported fabric between each bone, you might see more wrinkling at the waistline compared to corsets with more bones (and more evenly distributed bones).
  • With the bones themselves, flat steels may have curved slightly to conform to the lumbar curve of the wearer over time, and because of this concave curve, the fabric along the grommet panel might have slightly wrinkled.
  • Grommets might have shifted slightly towards the center back seam if they’ve had tension placed on them. (A grommet should not be like falling out of its hole as this is damage, but in a used corset don’t be surprised if they are not perfectly lined up with laser precision.)
  • With a really well loved corset, you will likely notice that a corset doesn’t like to lie flat like it did when it was new. It may look slightly wonky and might also retain the roundness of its wearer when taken off.
  • The fabric will be softer than when it was new.

 

How much “stretching” should I expect in a used corset?

An OTR corset (depending on its quality and the style of construction, and depending on how often it was used) may commonly stretch 0.5 – 1 inch in the waistline. Some may stretch even more, and this should be stated by the previous owner if the corset has stretched to the point where it’s considered a completely different size.

Also, mesh corsets stretch more than non-mesh ones, and corsets with a partial waist tape tend to stretch more than corsets with a full waist tape. I was burned once where I bought a 2nd hand corset off ebay that was stated to be a size 22″, but in reality had a waist of 26″ because it had stretched out so much by the previous owner.

The most lucky buys are situations where the first owner tried on their new corset once or twice, and then decided it wasn’t for them – essentially selling an unseasoned, effectively new corset.

Sidenote: will the ribs and hips of a corset stretch out too?: The waist will almost certainly expand more than any other part of the corset, because it’s the place of highest tension. A well-fitting corset should ideally create a gradient where there’s compression at the waist, which dissipates up and down so that there’s essentially no pressure at the underbust and the hips. But some change to the fabric may still occur.
One really good quote from Laurie Tavan is that “we as corset makers of course never want our corsets to stretch out [such that the measurements change] but it is actually good to have some ease on the bias” as it helps the corset lie smoothly and it’s more comfortable as well. A couple of other corsetieres I know will deliberately cut specific panels on a slight bias (e.g. along the bustline, or around the front hip) to mold smoothly around curves and prevent wrinkles.

To some effect, all fabric, even the industry favorite herringbone coutil, are going to stretch on the bias a bit. The measurements of the underbust, waist, and hips will not change by too much in a good quality corset because the binding will hold horizontal measurements at the ribs and hips, and the waist tape will hold the waist measurement – but along the bias in other areas of the corset, yes there will be some ease, and this is actually a good thing for a comfortable corset that “molds” to the body.

 

I recently purchased this Restyle corset 2nd hand, and it still looked and felt new from the first wear because the previous owner listed it for sale after only trying it on briefly. It was essentially “new” but at a great price, with cheaper shipping than if I bought it new from Europe.

Do I have to “re-season” or “re-break-in” a used corset?

Let’s go back to the shoe analogy: when you break in new shoes, its purpose is to soften the shoe and get it to mold around your foot so it doesn’t give you blisters. In a pre-used corset, the threads have already shifted, the corset has already softened, and the fabric has already eased along the bias (helping an effectively “2D plane” of fabric to better wrap around the hills and valleys of a 3D body), so the corset will likely be more comfortable and you will probably be able to lace it tighter than if the corset were “factory fresh” new.

If you’ve had the pleasure of being fitted for a corset in a brick-and-mortar shop, they will probably lace their floor sample on you which has been worn by hundreds of other customers, and it will feel less crunchy and more comfy than the brand new corset you purchase and take home. But let’s say you exclusively wear that new corset for several weeks or months; if you were to go back to that shop and try on the floor sample again, I bet you would probably be able to say, “nope, this is not my corset. It is A seasoned corset, but it’s not MY seasoned corset.” Same way that a mom can tell her baby apart from another baby with very similar but non-identical features.

So you may not have to “re-break-in” a pre-loved corset. However, if this is your very first corset and you have no prior experience with waist training / tightlacing etc, you will probably still want to ease yourself into it slowly and NOT go as tight as possible on the first wear. Baby steps.

 

Any fitting issues I should worry about in used corsets (that I don’t have to worry about in new corsets)?

If you lace up your corset to find that the ribs or hips are bigger than your own, then no amount of wearing your corset is going to make it shrink to fit (but this is the same with new corsets!).

If the original owner had a noticeably asymmetric body, such that their body placed different amounts of pressure on different sides of the corset, there’s a chance that you won’t be able to make the corset perfectly symmetric again. Especially if that corset was laced on an angle or ended up twisting on their body over time, unfortunately I have never figured out how to get the corset to untwist.

 

If you have any other questions regarding gently used corsets, feel free to leave your questions below! If you have anything to add (or if you agree or disagree with anything here) also leave a respectful comment below and let’s continue the conversation.