This post is a summary of the “Serindë “Oriental Princess” Corset Outfit review” video, which you can watch on Youtube if you prefer:
Center front is 10 inches long, the shortest part of the corset at the side seam is 7.5 inches (cut very high over the hip), and the enter back is also 11.5 inches. Circumferential measurements: waist is 24″, ribcage 26″ (measured about 3 inches above the waist), high hip 32″. The silhouette is very mild in silhouette; gently curved in the waist.
Fashion fabric is red brocade, the strength layer is coutil, and the lining is a lightweight black cotton.
6 panel pattern. Fashion fabric and strength fabric were flatlined, panels assembled with a top-stich, and it’s double-boned on the seams. Floating liner.
Red taffeta which matches the rest of the ensemble (halter and skirt), machine stitched on outside and hand-finished inside. Gold-tone beads and coins also attached by hand every inch or so around the top and bottom edges.
1 inch wide twill waist tape, invisibly stitched between the layers.
Modesty panel is around 5″ wide, finished in the same fashion fabric (red brocade and black lining). Stiffened with 2 steel bones (criss-crossed on the panel) and suspended on the laces. There is also a 1/2″ wide modesty placket in the front by the busk.
9 inches long with 5 pins, last two closer together. Standard flexible busk (half inch on each side). Finished in a gold-tone.
26 total bones not including busk. 1/4″ wide spirals, double boned on the seams. Two further 1/4″ wide flats sandwich the grommets on each side, as well as one 1/4″ flat steel by the busk on each side, making a total of 13 bones on each side.
Size 5mm Prym eyelets (very good 2-part eyelets and washers) with medium flange, finished in gold to match the rest of the hardware. Set a little closer at the waistline for ease of cinching. They’ve all rolled nicely.
1/2″ red double faced satin ribbon. Zero spring. They glide well through the laces.
If memory serves correctly, this is the first time that I’m reviewing an entire outfit / ensemble, as opposed to simply a corset – I’m very fortunate that this fit well enough to review even though it wasn’t made to my measurements. This outfit was originally called “The Oriental Princess” by Serinde Corsets.
The halter is directly sewn onto the top edge of the corset, and they can be adjusted with ties in the back of the neck. There is enough curve to conceivably give enough room for even quite large cup sizes, but it can also be pulled very tightly to fit smaller cups.
The mermaid skirt is also in a matching taffeta-texture fabric, with hand-sewn gold beads set approximately knee-level. This skirt is unfortunately just a little short for me, as it was made for a model a bit shorter than I am, but if I wear the outfit in flat slippers it’s not too noticeable. The back of the skirt is a little longer than the front – not a train per se, but it flares out beautifully behind me when worn.
Lastly, the lace shawl was ingeniously created from a simple tube of lace fabric, and again gold-tone beads were fastened on the edge of the “sleeves” and scattered throughout as well.
Serinde is currently on hiatus from commissions, but you can visit her Facebook fanpage here.
This entry is a summary of the review video “Serindë Short Hip Corset Review” which you can watch on YouTube here:
This corset is a standard-size 22″ by Serindë: the underbust is 27″, waist 22″, hips 32″. Center front length is about 10.5 inches, the princess seam is 9″ long and the side seam is 8.5″ long. I consider this corset to have a short hip (not longline) and is a moderate hourglass silhouette.
3 main layers: outer layer is gorgeous heavyweight burgundy brocade, strength fabric is coutil, and a lightweight plain black cotton floating lining.
6 panel pattern, with seams (and bones) converging in the bottom center front. Panels are assembled using a topstitch. Bones are sandwiched between layers, with both bones on one side of the seam.
Black satin bias tape, machine stitched on the outside and inside (top-stitched on both sides). No garter tabs.
1 inch wide waist tape, stitched invisibly between the layers.
Back modesty panel is about 4″ wide, boned in a criss-cross fashion with two bones, and suspended on the laces. 1/2″ wide modesty placket on knob side of the busk.
9 inches long, standard width busk (half inch on each side) with 5 knobs and loops (the lowest two are a bit closer together for control over the lower tummy).
24 bones total (12 bones per side). Mostly 1/4″ wide spiral steels, double boned on all the seams. There is a flat steel on either side of the busk as well, and two flat steels sandwiching the grommets on each side.
24 two-part Prym brand eyelets, size #0 (5mm), large flange, held in strongly. Set a little closer together at the waist. Good wide washers; no splits on the back.
Laces are 1/2″ wide double-faced satin ribbon, finished in black.
Decorative fan-lacing drapes across the front, with silver hardware and black ribbon – skillfully done, as it lies smoothly across the body when worn!
This lovely short underbust from Serindë was made last year, just before I launched the 30,000 subscriber giveaway – some of you may even remember the corset from that video! Serindë was also the corsetiere who kindly gave her time and efforts to create the corsets for the three winners of that giveaway.
This is the third corset I’ve reviewed from Serindë and her corsets are consistently high quality – even though her standard sized underbust pattern is tight for me in the ribcage, the construction is flawless – the fabric lays smooth over the body; and she typically chooses just one or two focal points for embellishment on each piece so her work is never boring, but never overdone. The decorative fan-lacing featured on this corset is expertly
Such a short-hipped corset feels almost like a cincher to me, and the moderate silhouette lends itself well to back and posture support, allowing good mobility and sitting for long periods, and matching fairly well with a good chunk of my wardrobe as burgundy is one of my favourite colours. If this corset had been custom-drafted to fit my ribcage better, that would be the only improvement I could see.
This post is a duplicate of the permanent page Guided Galleries –> Corsets with Fan Lacing. The guided galleries are part of the corset brand research tools, which are designed to help prospective corset customers shop more wisely. This particular article may be out of date in the future, please refer to the main page to get the most up to date information.
Fan lacing may also be referred to as “Camp” lacing, “Cross” lacing, or “Cluster” lacing. Fan-laced corsets are relatively rare today, but they can be useful for those who have limited strength or dexterity. Fan-laced corsets differ from ‘regular’ corsets by their utilization of metal slides (usually, but not always!). These slides have grommet-like small holes on one end through which the laces are secured, and an adjustable serrated slot which grabs securely onto a grosgrain tape or belt. This allows the wearer to tighten their corset the same way that they would adjust a bra strap; simply by pulling on a pair of belts on either side of the lacing panel.For those who are unable to reach behind them and ‘pluck’ the individual X’s of the laces, a fan-laced corset may be just the trick for quickly and easily adjusting one’s own corset; for those with disabilities who use corsets for medical purposes, the use of fan lacing can contribute to one’s independence when dressing oneself. For those who would like a fan-laced corset as a fashion statement, you will find this page useful as well. Scroll down to see a gallery of corset makers who are experienced with making fan-laced corsets!
*Corset makers: if you have made fan-laced corsets and would like to be included in the gallery, please submit your best photo to my email here with a 1-sentence description and your website URL. Safe-for-work photos are preferred! Thank you!*
The following corsets employ fan lacing to actually tighten and loosen the corset, rather than being used simply for embellishment. Scroll down the page if you’d like to see corsets which simply use fan-lacing for embellishment.
Decorative Fan Lacing:
The following corsets have a fan-lacing embellishment, but their use is not imperative to the actual function of the corset. Faux fan lacing can have a stunning effect on corsets, especially when contrast laces are used.
*Please note that I have not personally tried every corset brand in this list, nor do I necessarily endorse every company on this list. This is for informational purposes only.
Note that this post is a copy of the same one under the “Research Corset Brands –> Guided Galleries” menu. It is part of a collection of articles to help corset enthusiasts shop more wisely.
Rather than an hourglass silhouette, some people prefer their corsets to give them a more conical, tapered ribcage like what was so popular around the 1950’s New Look era. A human’s floating ribs (the 11th and 12th ribs) often have flexible joints, and they’re designed to swing in and out like a hinge with each breath you take. It is also possible for some individuals to train their ribs to be pushed inward, so they have a slightly tapered ribcage with or without the corset on. There are arguably over 100 different makers who can cater to the conical ribcage to give that 50’s “wasp waist” look, but I will just show some of my personal favourites, and some particularly impressive corsets that I’ve found to give this shape.
As mentioned before, different ‘schools’ of corsetry have different definitions for silhouettes. I was first introduced to this style as the “wasp waist” silhouette, as rib shaping is often more demanding to wear compared to more rounded hourglass silhouettes. Others may call this the conical silhouette, or the ice-cream cone silhouette – so when purchasing a corset, do clarify what kind of silhouette you’re looking for.
This entry is a summary of the review video “Serindë Couture Silk Overbust Review” which you can watch on YouTube here:
Serindë is a lovely small-business corsetiere based in Lyon, France – although her international shipping rates are very ideal! She’s known for adding jewelry and charms to her corsets, and her beautiful whimsical designs inspired by fairies and folk-lore, and she makes very sophisticated and sultry pieces as well, as evident in this gorgeous romantic overbust. She currently doesn’t have a website but you can find her on Etsy, DaWanda, and Facebook.
This overbust is a sample so the measurements of this corset may not reflect the measurements of a custom-fit overbust you commission from Serindë. Center front is 14″ inches long, and from peak of the bust to the curve of the lap is also 14″. Lovely hourglass silhouette with a conical ribcage and rounded, feminine hips. Longline corset, and the mild sweetheart is designed to be almost a mid-bust rather than a full overbust. I like the rounded contour of the bust area. Large hip spring; very comfortable in the hips. Recommended for hourglass and pear-shaped ladies, especially those with a bit of a smaller ribcage.
3 layers; fashion layer is champagne dupioni silk backed with interfacing; strength layer is coutil, and the lining is soft cotton.
7 panel pattern with no hip gores – 4 panels in front contribute to smooth a smooth, rounded bust, and 3 panels in the back. Hip area is also very smooth with no wrinkles or puckering of the fashion fabric. Top-stitching between panels, sandwiched boning (two per seam), and a floating liner (very comfortable). 6 total garter tabs.
Black satin bias tape, neatly machine stitched because this was a sample for a photoshoot and time was of the essence. Serindë explains that she hand-finishes the binding on personal commissions.
1″ wide invisible waist tape between the strength layer and the lining.
Floating modesty panel suspended by a ribbon on the back, in matching dupioni; lightly boned. but does include a placket on the knob side of the busk.
Standard flexible busk (1/2″ wide on each side) about 12.5″ long (6 pins), reinforced with a sturdy 1/4″ wide flat steel bone.
28 steel bones not including busk. On each side there are 11 spirals (1/4″ wide), double boned on the seams, 1 flat (3/8″ wide) beside the busk, and 2 flats (3/8″ wide) sandwiching the grommets.
36 total, 5mm two-part eyelets (Prym brand, very good quality) with moderate flange; set well with the grommets getting closer together near the waistline, no splits, no wear/fraying/pulling out.
1/2″ wide double-faced satin ribbon in black. Very strong, has not broken or frayed despite lacing very tightly in this corset.
This sample was available on Etsy for €390 which is around $520; subject to change.
This corset makes me feel like a princess. The dupioni silk lays perfectly smooth with absolutely no wrinkles – Serindë is a master in taming fashion fabrics and proper turn-of-cloth! The embellishments on the corset compliment one another so well, and are not overbearing – the hand-sewn lace motifs draw the eye to the waistline and create the illusion of an even smaller waist, while the hand-flossing on the ends of the bones balance out the embellishment on the top and bottom edges, and the beading/ Swarovski crystals add a bit of sparkle. I also like how the crystals are organically laid out and not symmetic on both sides. This creates somewhat of a “natural” type of beauty, as if the crystals stuck wherever the wind made them land. This also means that if I were to go out dancing in this corset and one or two of the crystals were to fall, then the corset would still look perfectly fine and finished. However these crystals hold very well and I don’t think they will be falling off anytime soon! The beaded straps, designed to fall off-the-shoulder, add another level of romanticism to this corset and are attached with a bit of elastic to protect the silk from ripping due to any tension, and also adds a bit of adjustability. This piece is pure grace and glamour.
To see Serindë’s standard size sale items, do check out her Etsy store here, and if you would like to commission a custom piece from her this year, don’t hesitate to contact her via email or Facebook.
This entry is a summary of the review video “Serindë Underbust Corset Review” which you can watch on YouTube here:
Serindë is a lovely small-business corsetiere based in Lyon, France – although her international shipping rates are very ideal! She’s known for adding jewelry and charms to her corsets, and her beautiful whimsical designs inspired by fairies and folk-lore, although she makes very sophisticated and sultry pieces as well. She currently doesn’t have a website but you can find her on Etsy, DaWanda, and Facebook.
Center front is 12″ inches long. On my standard size 22″, the underbust is 27″, waist 22″, and hips 33″. Lovely hourglass silhouette. Longline corset, good for ladies with nearly all torso lengths, since the shortest part of the torso is 8.5″. Large hip spring; very comfortable in the hips. Will hold in lower tummy pooch; recommended for hourglass and pear-shaped ladies, especially those with a bit of a smaller ribcage.
3 layers; fashion layer is silver-on-navy floral brocade backed with interfacing; strength layer is coutil, and the lining is soft cotton.
6 panel pattern with no hip gores. Top-stitching between panels, sandwiched boning (two per seam), and a floating liner (very comfortable). No garter tabs.
Blue satin bias tape, beautifully hand-finished.
1″ wide invisible waist tape between the strength layer and the lining.
No modesty panel in the back on my version, but does include a placket on the knob side of the busk.
Standard flexible busk (1/2″ wide on each side) about 10″ long (5 pins), reinforced with a sturdy 1/4″ wide flat steel bone.
24 steel bones not including busk. On each side there are 9 spirals (1/4″ wide), double boned on the seams, 1 flat (1/4″ wide) beside the busk, and 2 flats (3/8″ wide) sandwiching the grommets.
30 grommets total, 5mm two-part eyelets (Prym brand, very good quality) with moderate flange; set well with the grommets getting closer together near the waistline, no splits, no wear/fraying/pulling out.
1/2″ wide double-faced satin ribbon in navy blue. Very strong, has not broken or frayed despite lacing very tightly in this corset.
Recently quoted on Facebook at €165 which is around $215; subject to change.
I love this thing. This is another corset that I will likely never part with. I have to commend Serindëfor her ability to tame the temperamental Chinese brocade without one wrinkle or frayed edge whatsoever! The blue and silver colour scheme is gorgeous together and the silver hardwear completes the look so nicely. The jewelry chains draw attention to the hipspring by cascading down the sides of the hips. I love that I can dress this corset up or down, and remove the jewelry if need be. This corset is also very comfortable and I find that I can easily close this corset at the waistline, whereas in other 22″ corsets I’m limited by the girth of the ribcage and hips. I only find this corset to be a tad small in the underbust area (the corset’s underbust is 27″, while my ribcage is usually 28-29″) but I knew this before I purchased the corset. Serindë is one designer you definitely need to watch in the near future!
To see Serindë’s standard size sale items, do check out her Etsy store here.
The ads below contain affiliate links. If you click through the pictures and you happen to like and purchase anything, you are helping to keep LucyCorsetry online. :)
Lucy’s Amazon Picks