This article contains the same information as my video, “3 ways to Predict Fit & Proportion in OTR Corsets”. You may watch the video here if you prefer not to read – or you can continue reading below the video.
Before reading this article, you may want to catch up with some of my other corset fitting articles like “Shape of the Corset Gap” and “Troubleshooting More Fitting Issues“. Those videos and articles had focused on how a corset will look and feel on your body, and how to determine whether it’s a proper fit. However, there are ways to predict how a corset will fit your body even before you purchase it online! Making the most of size charts and fitting information can mean the difference between “fits almost like a custom” and “not what you expected”. It’s of absolute importance to remember that corsets don’t stretch the way most modern clothes do, and your bodies bones largely don’t compress.
The biggest issue I have with OTR corsets these days is that many companies still recommend that you choose your corset size based only on a 1-point measuring system (i.e. “subtract 4 inches from your natural waist”). But this is oversimplified. Different corsets will fit differently on different bodies, even if they’re the same size!
There is no reason why a corset company would NOT provide at least 3-4 measuring points (underbust circumference, waist circumference, high hip/iliac circumference, and then the vertical length of the torso) so you can determine the proportions and the length that will fit your body best even before you buy a corset. These proportions can be determined immediately by looking at the original draft of the corset pattern, or you can do some quick and simple measuring of the final corset to determine these proportions.
When I sell standard-sized corsets (either new OTR corsets or my own pre-made samples) I almost always ask the customer for their natural underbust/waist/iliac measurements and their torso length. I personally check their measurements against the measurements of the corset, and verify that the size they would like is going to fit them well. Doing this has greatly decreased the number of exchanges/ returns requested.
Some businesses already use the 3-4 point measuring system, and they may provide this information in 3 different ways:
1: Using size charts/ tables
To the right, you see an example of a size chart for a corset. You want the waist of the corset to be between 3-6 inches smaller than your natural waist (depending on your squish level), but you want the rib and hip measurements to be as close as possible to your own natural measurements. This will ensure that the corset cinches the waist and NOT the upper ribs or hips (which are far less compressible), and thereby result in a more flattering silhouette and comfortable fit. Size charts are my favourite way of logging proportions of a corset, because I can check its measurements against my own natural measurements at a glance. Corset businesses that utilize size charts include (but are not limited to): Meschantes, Electra Designs, and Mystic City corsets.
2: Recommending that the customer’s measurements fall within a certain range
Some corset makers prefer not to use a size chart, but will instead recommend that your natural measurements be within a certain set of measurements. If you are on the upper end of this range, then you can expect the corset to have a larger gap in the back compared to if you were at the smaller end. Although this situation is better than a 1-point system, you may still end up with slightly uneven gaps in the back depending on where your own measurements fall and how large the given range of measurements is. Corset businesses that utilize this system include (but aren’t limited to) Isabella Corsetry, Starkers Corsets ready-to-wear samples, and Morgana Femme Couture.
3: Discussing the proportion (rib spring and hip spring) of the corset, rather than absolute numbers
Orchard Corset is an example of a company that simplifies the measurements into a simple set of proportions – for instance, for a Level 3 silhouette corset you may find that the underbust (upper ribcage) circumference is 5-6 inches larger than the closed waist measurement, and the low hip circumference is 10-12 inches larger than the closed waist measurement. (Typically OTR corsets are made quickly so the measurements aren’t likely to be as precise as a custom corset, that’s why you have a general range.) Doing some simple math, this means that for a size 30” corset, the underbust will measure (30 + 5 = 35 inches), and the low hips will measure (30 + 10 = 40 inches).
In the next video/ article of the series (part 2), I will show you how to use size charts properly, to predict whether a corset will fit you or not *before* you purchase it. And in part 3, I will show you how to fairly accurately measure your own corsets. This will help you verify that the corset you just received in the mail has the correct measurements (they match the size chart/ ranges mentioned on the website) and that the corset will be likely to fit comfortably once closed.