This entry is a summary of the review video “CS-411 LONGLINE underbust (Orchard Corset) Review”. If you want visual close-ups, you can watch the video on YouTube here:
Center front is 12 inches long, princess seam is 11 inches (5.5″ above the waist, 5.5″ below the waist), side seam is 10 inches and center back is 12.5 inches.
Underbust 28″ (6 inch rib spring), waist 22″, low hip 32″ (10 inch hip spring).
3 main layers – the fashion fabric is black cotton twill (also available in satin), flatlined to a sturdy cotton interlining, and lined in black twill again. Very stiff interlining in center front panel.
4-panel pattern (8 panels total). Constructed using the sandwich method.
One-inch-wide waist tape running through the corset, hidden between the layers.
Made from matching black cotton twill, machine stitched on both sides. Stitched in the ditch on the outside, and topstitch on the inside. There are no garter tabs.
Slightly under 6 inches wide, made of a layer of black satin and a layer of twill. Unstiffened, and attached to one side with a line of stitching (easily removed if desired).
The modesty placket in the front is also black twill and ¼” wide, extending from the knob side of the busk and not stiffened.
11″ long, with 5 loops and pins (last two are a bit closer together). Slightly heavier busk, slightly under an inch wide and fairly stiff.
16 bones total in this corset. On each side, 6 of them are spirals about ¼” wide (double boned on the seams) and then there are two flat steel bones, both ¼” wide sandwiching the grommets.
There are 24 two-part size #00 grommets (10 on each side), with a small flange, spaced equidistantly. On the underside there are many splits, but they don’t catch much on the laces due to the choice in laces.
The laces are ¼” wide flat nylon shoe-lace style. I find them to be long enough and quite strong, but also rather springy.
Available in black cotton, black and white satin, and black brocade (I recommend the cotton finish for longevity and smoothness). Sizes go from 18″ up to 46″ closed waist.
Sizes 18″ to 32″ costs $72 USD | Sizes 34″ to 46″ costs $75 USD
This was another one of those OTR corsets that I felt really indifferent towards as I took it out of the package, but it ended up giving a surprisingly really lovely silhouette once I wore it in for a time.
The silhouette of this longline CS-411 corset is reminiscent of the original CS-411 with sweeping lines and somewhat conical ribs. The hips are slightly more “cupped” below the iliac crest, however, compared to the original. I also feel that this version is slightly more curvaceous than their standard CS-411, and that could be why it fits my body better – I do have a longer torso though, and I tend to believe that longline corsets are generally more flattering on my body so this could be influencing my opinion.
While this corset is available in a cotton fashion fabric and satin fashion fabric, I would personally recommend the cotton as it’s is sturdier, doesn’t wrinkle as easily, is harder-wearing (doesn’t pull or fray as easily), abrasion-resistant and is generally better at hiding wear and tear.
If you’re not a fan of the springy synthetic “workhorse” style shoelace that comes with this corset, Orchard also carries has some higher quality laces (double-faced satin ribbon and paracord) in an assortment of colors. I personally much prefer their ribbon laces to the standard shoelace style laces, but paracord is said to be the strongest type of cord.
One thing to look out for is that the “bunny ears” are also consistently set high on the waist on Orchard Corsets (sometimes higher than the waist tape and always higher than my natural waist), but this is an easy fix – you just need to relace the corset, and I have a tutorial on that here.
This post is a summary of the “Orchard Corset MESH CS-411 Underbust Review” video, which you can watch on Youtube:
Center front is 10.5 inches long, the side seam is 8 inches long. (Your torso should be about 9 inches long from underbust to lap). Circumferential measurements: waist is size 22 (22 inches), the underbust is 29 inches (7 inch rib spring), and the low hip is about 31 inches (9 inch hip spring).
One main layer of beige, cotton fish-net style mesh. The boning channels and binding are beige cotton twill.
Although it looks like a 6 panel pattern, the corset is actually made from the same pattern as the original CS-411 so it’s a 4-panel pattern with extra boning channels in the center of some panels. As the corsets get larger in size, the number of boning channels increase. The seams between the panels are reinforced by sewing twill boning channels to both the outside and the inside of the seam, completely covering/ sandwiching it.
Bias strips of beige twill, neatly machine stitched on outside and inside. No garter tabs.
1-inch wide beige satin ribbon is exposed on the inside of the corset, anchored by the seams/ boning channels. (Note that the newer stock have a black ribbon, not beige!)
Modesty panel is 5.5″ wide and finished in beige twill. Unstiffened and stitched to the corset on one side (easily removable). No modesty placket in front.
9.75 inches long (a bit unusual in length) with 4 loops and pins, the bottom two closer together. The busk is slightly wider and slightly stiffer than a standard flexible busk (this one is about 3/4″ on each side).
14 total bones not including busk (7 on each side). 1/4″ wide spirals, single boned on the seams. Two 1/4″ wide flats sandwich the grommets on each side. This is ONLY for the size 22″ (larger sizes have more bones, contact Orchard Corset for more info about other sizes).
20 grommets total, size #00 with a small flange and finished in silver. Set equidistantly, about 1 inch apart.
Ivory flat nylon shoelace style lacing, 1/4″ wide. Slightly springy but very difficult to snap. Long enough and comfortable to hold when lacing up.
The smaller sizes (up to size 32″) is $69 USD, and the full-figure sizes (up to size 40″) is $77 USD.
Use CORSETLUCY to save 10% off your entire order! (This is a coupon, not an affiliate link.)
I was quite impressed with the curviness of their mesh CS-411 compared to their original cotton/ satin CS-411 styles – I have a broader ribcage compared to some other women, so I find this curvier mesh version to be much more comfortable than their CS-411 corsets finished in other fabrics.
Also because this corset has much give in the mesh, it contours around the ribs in a convex shape and can accommodate round and rigid ribcages without placing pressure on it (the CS-411 in cotton twill, for instance, is slightly more conical through the ribs).
The CS-411 corset is my favorite of Orchard Corset’s mesh pieces. The fact that it’s cut (more or less) straight across at the top and bottom edges make it great for “stealthing” (wearing under clothing, especially in the summer) without weird points poking out from under your clothes. It’s cool and breezy, ideal for use in hot climates or during the summer. But if you have a longer torso or if you have a larger, lower hanging tummy, you may prefer to try Orchard’s mesh CS-426 longline corset instead which provides more control of the lower abdomen.
Because of the tension at the waist tape and much less tension in other areas of the corset, the fabric around the grommets pull unevenly at the waistline and cause the bones to twist a bit, but the grommets had fortunately not ripped out. It was the mesh itself that had ripped after a few months of use.
Keep in mind that these mesh-style corsets don’t last forever – if I’m wearing a mesh corset on a regular or daily basis in the summer, I can expect it to wear out by the time autumn arrives – this is somewhat true of all “fishnet” style mesh corsets, regardless of the brand, so it’s not a strike against Orchard Corset – it’s the nature of the fabric. The CS-411 corset is available in solid fabrics as well if you prefer your corsets to be a little more sturdy and last a bit longer.
Use my coupon code CORSETLUCY for 10% off your entire order – this is a discount, not an affiliate code! I get no payment from people using this code.
This entry is a summary of the review video “Orchard Corset CS-411 Underbust Review”. If you want visual close-ups, you can watch the video on YouTube here:
Center front is 10″, shortest part is 8.5″. It’s a shorter corset that fits closer to a cincher on my body. Gives a moderate hourglass shape – this is a Level 2 silhouette, so the ribcage is 4″ bigger than the waist, and the hips are about 8-9″ bigger than the waist.
3 main layers – the outer coarse-weave poly-brocade fashion fabric, flatlined to a sturdy cotton interlining, and lined in twill.
4-panel pattern (8 panels total). The shape of the panels is very similar to the cincher by Isabella Corsetry, although the contours are slightly less, the ribcage and hips a little smaller. Constructed with a slightly modified sandwich technique.
Binding at top and bottom are made from commercial black satin bias strips, machine stitched on both sides. There are no garter tabs in this corset.
One-inch-wide waist tape running through the corset, hidden between the layers. I did not check to see if there was glue used in this one (see my CS-426 review if you want to know more about that particular corset).
There is a modesty panel on the back, made of a layer of black satin and a layer of twill. 5” wide (~3″ usable space) and attached to one side with a line of stitching.
Slightly heavier busk, slightly under an inch wide and 9” long, with 4 pins. It is fairly sturdy; less bendy than a standard 1/2″ busk.
16 bones total in this corset. On each side, 6 of them are spirals about 3/8 inch wide and then there are two flat steel bones, both ¼” wide sandwiching the grommets.
There are 20 2-part size #00 grommets (10 on each side), with a small flange, spaced equidistantly. On the underside every grommet is split and quite scratchy, but they don’t catch on the laces so I can’t complain.
The laces are ¼” wide flat nylon shoe-lace style. I find them to be long enough and quite strong, but also rather springy – you just have to tug a little harder to get the corset to stay closed because of the elasticity of the laces. However, Orchard has some higher quality laces (in several colours) available on their website – I very much prefer their ribbon laces to the standard shoelace style laces.
Currently $69 USD.
Although this particular fashion fabric is not available to purchase through Orchard Corset (as it was a prototype), the cut of the corset, construction methods, and other fabrics/ materials should all be the same – so in this review I’m really commenting on these features as opposed to strictly the shell fabric.
I very much prefer this style of thicker poly-brocade compared to the thin shimmery satin shown in my CS-426 corset review. I found that satin had a tendency to wrinkle easily, when the satin started to pull in places, you could see the crossweaves of coral and brown threads and the wear of the corset was quite apparent. The satin also pulled and frayed easily where it had caught onto things (keep it away from any hooks, scratchy/sharp edges, or especially velcro!). This brocade is sturdier, doesn’t wrinkle as easily, is harder-wearing (doesn’t pull or fray as easily) and is better at hiding general wear and tear. A bird told me that Orchard may begin stocking all-cotton corsets in the future, which would be an even better choice for those looking for regular support.
The ads below contain affiliate links. If you click through the pictures and you happen to like and purchase anything, you are helping to keep LucyCorsetry online. :)
Lucy’s Amazon Picks