Tag: coutil

Posted on by

Puimond PY15 Black Wicked Plunge Overbust Corset Review

This entry is a summary of the review video “Puimond Wicked Plunge Overbust Review” which you can watch on YouTube here:

Fit, length Center front is about 13 inches long. From apex of bust to bottom of the corset is 17″ (waist to apex 12″), center back about 13.5″. Unique dramatic wasp-waist (yet comfortable) silhouette. Hips are longline and rounded, while ribcage is more conical. Exaggerated plunge neckline; I recommend using double-sided/ toupee tape if your breasts tend to migrate.
Material Fashion layer is black spot broche, backed onto cotton; lining is cotton coutil.
Construction 6 panel pattern. Top-stitching between panels, sandwiched boning channels (with the use of bone casings), one on each seam and one in the center of each panel. Floating liner (very comfortable).
Binding Black patent leather, machine stitched inside and outside; trimmed short instead of folded under on the inside (typical treatment of leather/ pleather binding)
Waist tape 1″ wide invisible waist tape between the interlining and lining.
Modesty panel None.
Busk None. Closed front with embellishment.
Boning 24 steel bones. Two steel flats in the center front (underneath embellishment), and four flats in the back sandwiching the two rows of grommets. Remaining bones are 1/4″ spiral steel, one placed on each seam and one placed in the center of each panel.
Grommets 26 grommets total, size #00 two-part grommets with moderate flange; set equidistantly; high quality – no splits, no wear/fraying/pulling out of grommets
Laces Strong nylon braided shoe-lace style laces; they’re thin, they grip well and they are long enough. Very easy to lace up. Almost no spring.
Price The PY15 is advertised as $490 for fabric and $650 for leather/vinyl. You can see the options on his website here.
Puimond Wicked Plunge overbust, modeled by Lucy (me). Photo: Krista Naco.

Final Thoughts:

This is my second Puimond overbust corset. As I had mentioned in my previous Puimond review, this one is constructed differently and is one of my favorite corsets in terms of fit, comfort and sturdiness. It’s a shame that I don’t get to wear it out often enough!

This corset is quite long with a low waistline, and feels as though it were constructed to fit me, even though it’s a standard size. (The bust is actually supposed to be like that!) The quality of the materials and hardware used are also top. If a standard size fits this well, I’d be quite curious to know how a custom one could fit! I’m a huge fan of Puimond and can’t recommend his work highly enough. To see Puimond’s other styles, do visit his website here.

Posted on by

Black Mesh Corset Case Study

This entry is a summary of the video “Case Study: Homemade Mesh ‘Corset'”. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

Fit, length Center front is 11″ high, and I drafted this corset to be very curvy: underbust about 32″, closed waist 23″ and hips 34″. The elastic mesh also contributes to the extreme shape and curviness.
Material Heavyweight powernet (quite stretchy) for most of the panels, and black satin coutil for the first and last panels, the boning channels and the diamond waist tape.
Construction Essentially a 6-panel pattern although the last panel is separated into two to make 7 panels. First, the powernet panels were sewn together wrong sides together and flat-felled with the bulk being on the outside of the body. Then I added the center front coutil panels, with the diamond waist basted in front. The diamond extends into a waist tape, which was basted at each seam, then I secured the external channels down on top of it. The back coutil panel went on last, then I added the busk and bones, and lastly serged the top and bottom edges.
Binding There is no binding on this *yet*. I had serged the raw edges to keep them from fraying. This allows the mesh to stretch. Conventional binding would not allow the top and bottom edges of the corset to stretch. However I may later add an elastic or mesh binding.
Waist tape The diamond detail made from satin coutil extends into a waist tape that is slightly more than 1 inch wide, and placed on the external side of the corset, secured down at the boning channels.
Modesty panel I didn’t make a modesty panel for this corset because I designed it to close completely at the back. There is a small modesty placket in the front by the busk.
Busk A standard flexible busk, 1/2” wide on each side, with 5 pins, 9.5″ long. Although it is quite flexible, having 3 layers of satin coutil surrounding the busk makes the front panel quite sturdy.
Boning 20 bones total in this corset (not including the busk). On each side there are eight 1/4″ wide spirals in external channels, then a 1/2″ wide flat steel on the center back edge of the grommet panel, and a 1/4″ steel on the “inner” side of the grommets.
Grommets There are 26 2-part size #00 grommets (13 on each side). I used self-piercing grommets to insert these, placing the grommets closer together than I normally would and making sure the grommets are snug between the two flat bones. So far they have all held up well.
Laces Some old black cotton shoe-lace style. More lightweight than nylon laces but not as strong. I just used whatever I had lying around.
Price This corset was quite time consuming due to the flat-felled seams and external channels and waistband. Also the powernet and satin coutil were both expensive materials. If I were to remake this corset (with a more pristine finish) it would likely start at no less than $280.

Final thoughts:

This is an extremely comfy corset. I also feel that I’m able to very easily cinch down in this corset – I wish I had drafted it to be another inch or two smaller! The powernet is forgiving of curves and makes my asymmetric hips look symmetric, while giving me absolutely zero pinching or discomfort.

The only disappointments I had with this corset was a) the asymmetry in the diamond detail, and b) the rough finish of the serged edges. I may end up adding binding to this corset (either elastic or mesh) although that would somewhat ruin its ability to be worn inconspicuously under clothing, and I’m not sure how even elastic binding would bring back the dreaded muffin top which is currently so nicely avoided.

Overall I think this experiment turned out much nicer than I had anticipated, and I think I will use this as a sleeping corset in the future! However I do need to practice my “finishing” of corsets, even when they’re experiments or prototypes.

Posted on by — 2 Comments

“Disco Armadillo” PVC Ribbon Cincher Case Study

This entry is a summary of the video “‘DISCO ARMADILLO’ PVC Ribbon Corset”. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

***

This was my first attempt at sewing a corset from vinyl. I have to thank Marta “Snowblack” for her wonderful  Foundations Revealed tutorial on sewing leather and vinyl corsetry. Just a few things that I have learned about handling vinyl:

  • The material stretches (so you must back it with coutil) however it does not drape like most other fabrics.
  • It is also not a self-healing fabric, and will show all pinpricks. Therefore you should pin your panels only in the seam allowances.
  • Using a teflon foot (or a piece of tissue between the vinyl and the presser foot) will help the vinyl to feed smoothly without dragging or sticking to the presser foot.
  • Lastly, feed dogs will leave permanent marks into the bottom of the vinyl, especially if it has a metallic foil finish. Putting tissue or masking tape on the underside of your fabric (where your seam line will be) will protect your fabric from the feed dogs digging in.
***

Here is the overview of my Disco Armadillo, in typical review form:

Fit, length Center front is 10.5″ high, and I drafted this corset to be very curvy: underbust about 32″, closed waist 24″ and hips 34″.
Material Just two layers; the outer PVC ribbon and the inner coutil.
Construction 5-panel pattern – three vertical panels at front/side/back to hold the bones, and two ribbon panels. I learned how to draft a ribbon corset from Sidney Eileen’s ribbon corset sewing tutorial. The coutil panels aren’t “ribboned” like the outer pieces; rather they are in one piece. Most seams are topstitched as I was afraid that lockstitching would cause the PVC to become too perforated and tear apart. However at the busk, seams were lockstitched nonetheless as it looked better. Some edges of the ribbon were left raw, as folding those edges under would be too bulky.
Binding There is binding at the top and bottom of the vertical panels only; the ribbon panels do not have binding. I also left the inside edge of the binding raw – this is normal with binding made out of leathers or vinyls.
Waist tape Ribbon corsets typically don’t have a waist tape; a horizontal piece of ribbon running around the waist will act like a waist tape anyway.
Modesty panel I didn’t make a modesty panel for this corset because I designed it to close completely at the back.
Busk A standard flexible busk, 1/2” wide on each side, with 5 pins, 9.5″ long. Although it is quite flexible, having 3 layers of PVC ribbon surrounding the busk makes the front panel quite stiff and sturdy.
Boning Only 8 bones total in this corset (not including the busk), only boned on the vertical panels. There are two spring steel bones sandwiching each row of grommets at the back, and an additional two bones on each side panel, all 3/8″ wide.
Grommets There are 20 2-part size #00 grommets (10 on each side). I used self-piercing grommets and a new press to insert these, and they work very well with the PVC. I placed a layer of heavy canvas in the grommet panel to give the grommets more to “grab onto” and to prevent the PVC from stretching. There are no splits and the grommets are holding up quite well with regular use.
Laces I used some 100% nylon purple paracord – it’s extremely strong (holds tension up to 500 lbs) and has no stretch, is resistant to fraying but has a tendancy to twist. You will definitely need a square knot or bow (not a round one) to keep your corset securely tied at the back.
Price Ribbon corsets in general are not particularly difficult but they are time-consuming and require a bit of pre-planning. I would most likely place a typical satin-and-coutil ribbon corset at around $150. However, because the PVC ribbon is extremely challenging to work with and also quite expensive ($10/meter when not on sale, and this corset used 9 meters), I wouldn’t remake this corset for less than $250.
Posted on by

“Wrinkly Pig” Corset Case Study

This entry is a summary of the review video “Wrinkly Pig” Corset Case Study”. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

***

Note: the following are the differences between the “Wrinkly Pig” and the “Tickled Pink” corset in terms of construction:

  Wrinkly Pig Tickled Pink
Fusing Fused the brocade to a layer of woven fusible interfacing, then flatlined that to coutil. Fused the brocade directly to a layer of coutil using “Heat n’ Bond” (fiddly sheet of glue, I don’t recommend it).
Roll-pinning Everything was flat-pinned, not roll-pinned. Some roll-pinning was done on the side panels.
Seams Lock-stitched seams; allowances were not trimmed or clipped at curves. Seams were trimmed and flat-felled.
Boning channels Double-boned at the seams, sandwiched between two layers of coutil. Single boned at the seams, used external boning channels (cuts down on wrinkles slightly)

***

And here is my review:

Fit, length Decent curves. Used to be a slightly long-line corset but I later shortened the hips so it is more of a cincher now. Center front is about 11″ long.
Material 4 layers including the interfacing: brocade fashion fabric fused to interfacing, then flatlined to interlining of coutil and another lining of coutil.
Construction 6-panel pattern. Seams were lock-stitched (stitched twice) at the seams, the allowances were pressed open. The brocade/interfacing/coutil flatlined panels were all assembled, then the coutil lining was assembled. The layers were then stitched together at first/last panels, flipped right-side out and stitched in the ditch between panels and also secured at boning channels.  Bones are sandwiched between the two layers of coutil.
Binding The binding at top and bottom are made out of commercial hot pink cotton bias tape, machine stitched on both sides.
Waist tape 1” wide twill tape between the coutil lining and interlining, stitched invisibly so it’s not noticeable.
Modesty panel Suspended modesty panel made from brocade fused to twill, and stiffened with plastic canvas. 7″ wide.
Busk A standard flexible busk, 1/2” wide on each side, with 5 pins, 9.5″ long.
Boning 22 steel bones in this corset not including the busk. The seams between the panels are double-boned (except the seam closest to the grommets with ¼” inch wide spirals, and there are a pair of flats sandwiching each column of grommets.
Grommets There are 30 2-part size #X00 eyelets (15 on each side). They have a medium flange around and are spaced out 3/4 inches apart. No pulling away of fabric yet but they are very small so many types of fat cord is hard to thread through.
Laces 1/2″ wide double-face satin ribbon, baby pink in colour. About 5 meters and not really long enough for my tastes. I think I may change out the laces for some longer ones.
Price If I were to re-make this corset, I would roll-pin the panels and also use wonder-under or stitch-witchery to directly fuse the brocade to a layer of coutil to eliminate wrinkling. Keeping other construction techniques the same, I would likely charge around $260 USD for a corset like this.
Posted on by — 19 Comments

Heavenly Corsets Wasp-Waist Training Underbust Review

This entry is a summary of the review video “Heavenly Corsets “Wasp-Waist” Training Underbust Review”. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

***

Note: the following are the differences between the “standard” wasp-waist corset and the “training” wasp-waist corset:

  Training Corset Standard Corset
Materials Always made in coutil, with an inner layer of twill, and a cotton lining layer Either a layer of outer fabric (unless coutil) with an inner layer of twill and cotton lining layer OR if you chose coutil, a single layer of coutil and a cotton lining layer
Boning double boning throughout 6 fewer bones than the trainer
Busk wide solid steel busk standard steel busk
Modesty Panel included NOT included
Seams triple-stitched seams double-stitched seams

***

And here is my review:

Fit, length Dramatic curves, “wasp-waisted”. This is a longline corset coming over my hips. The center front is 12” high. Measurements (both circumference and vertical) were taken to fit my body; quite comfortable with no pinching. One issue with the bones in the back bowing outwards and twisting so creates a gap at the waistline.
Material 3 main layers. The outer fashion fabric is red satin coutil, twill interlining and lightweight cotton lining inside.
Construction 6-panel pattern. It looks as though the coutil panels were lock-stitched (stitched twice) at the seams, the allowances were pressed open and zigzag stitched again. (Some people may not find this aesthetic but if it makes for a strong corset then I don’t mind.) Bones are sandwiched between the satin coutil and the twill, and the cotton lining is primarily floating.
Binding The binding at top and bottom are made out of commercial red satin bias tape machine stitched on both sides; it’s folded under and stitched in the front and then topstitched to catch the back.
Waist tape 1” wide twill tape between the lining and the twill interlining. Stitched down horizontally across all the panels of the lining (so is not invisible but still cannot be felt).
Modesty panel Unboned modesty panel, 4.5 inches wide made from satin coul on the outside and lightweight cotton on the underside. No placket beneath the busk. (I would have preferred a slightly wider panel.)
Busk A heavy duty busk, 1” wide on each side, with 5 pins, it’s quite stiff and it’s 11” long.
Boning 22 steel bones in this corset not including the center front, ALL flat bones. The seams between the panels are double-boned (except the seam closest to the busk) with 3/8 inch wide flats (slightly wider than ¼”), but on the outer edge of the grommets in the back those bones are ½” wide flats.
Grommets There are 20 2-part size #00 eyelets (10 on each side). They have a medium flange around and are spaced out 1¼ inches apart. I would prefer for them to be spaced closer together and there be more of them, but functionally they’re sound; no pulling away or fraying of the fabric. On the underside there are no splits.
Laces  ¼” wide flat braided cotton laces, NOT nylon. They’re easy to pull and they grip well, not much wear so far. Cotton laces are sometimes prone to snapping so should be replaced more often, however I’ve had this corset for about 9 months and haven’t had to change the laces yet.
Price Currently £160 ($250) for the 23/7 waist training wasp-waist corset, or £120 ($185) for the non-training wasp-waist corset.
Heavenly Corsets red satin coutil wasp-waisted training corset, modeled by Elle, the corsetiere.

Final Thoughts:

I received a mixed reaction from this review. A few previous customers of Elle came forward and told me that they didn’t like certain aspects about this style of corset, such as a wobbly stitch line here or there, or the fact that she uses all spring steel bones. I put all this into perspective. Back in 2012, I hadn’t found a more affordable 23/7 training piece, and the materials used (including English coutil) are quite high quality. From what I can see, the primary stitch lines (the straight ones, holding the panels together) are straight and even, and although the zig-zag stitching (which is technically the 3rd stitch on each panel) does veer a bit and is not aesthetically pleasring, it still serves its purpose – to further reinforce the panels together. At that point in the construction process, it has no effect on the overall shape or measurement of the corset.

This did not come as a surprise to me, because I asked Elle a thousand questions before I ordered (and she was quite patient with me every time). The purpose of this corset (for me) wasn’t meant to be pretty or be shown off on a regular basis, it was meant to be strong.

Edit December 2014:

It’s been about 4 years since I ordered this corset, and nearly 3 years since the review – truthfully, I had forgotten about this corset review until recent events brought it back to my attention.
How did my corset hold up? The seams remained strong and none of the bones wore through their channels, but the very flexible bones in the back by the grommets became annoying, so I ended up switching them out for stronger (but more narrow) 5.5mm steels from Vena Cava. I also added more grommets between the pre-existing ones in the back of the corset for better control (the size #00 self-piercing grommets that fit the C-Step 2 machine are a decent match), and changed the lacing style. This was the only issue I experienced with my corset. However, other clients of Elle have had different experiences than myself, and I encourage you to read some of the comments below so you can gain a balanced view before deciding.