Description
This curvy underbust is made from two layers of fine-weave corsetry mesh, with a thinner more flexible boning that molds to your body for that no line look. In front there are rigid steel bones to help hold in the stomach and YKK zippers which are the best quality available. Designed to give no lines under clothing!
The standard length corset is suitable for someone with an average torso length, and a relatively balanced figure who carries their weight equally on top and bottom. These corsets have a more hourglass silhouette, so it will nip in your waist and provide a more dramatic curve compared to the ‘slim silhouette’ corsets. This corset is also a good choice for those who have trained their waist and are able to fully close their previous Timeless Trends corset!
This corset is Timeless Trends label, and is made to the same specifications as Timeless Trends.
| Corset Size | Ribcage (inches) (Measured 5 inches up from waistline) | Waist (inches) | Upper Hip (inches) (Measured 4 inches down from waistline) |
|---|---|---|---|
| 18 | 24.5 | 18 | 28 |
| 20 | 26.5 | 20 | 30 |
| 22 | 28.5 | 22 | 32 |
| 24 | 30.5 | 24 | 34 |
| 26 | 32.5 | 26 | 36 |
| 28 | 34.5 | 28 | 38 |
| 30 | 36.5 | 30 | 40 |
| 32 | 38.5 | 32 | 42 |
| 34 | 40.5 | 34 | 44 |
| 36 | 42.5 | 36 | 46 |
| 38 | 44.5 | 38 | 48 |
| 40 | 46.5 | 40 | 50 |
| 42 | 48.5 | 42 | 52 |
Measurements:
The standard length underbust corsets generally accommodate ribcage ~6.5 inches larger than the waist, and hips ~10 inches larger than the waist. For instance, a size 24″ corset would fit someone with a ribcage circumference of 30.5″ and high hip of 34″. However, as a mass-produced garment there is a natural variation in these corsets so the proportions may not be exact in every corset.
Lengthwise, the standard length underbust corsets are approximately:
11.5 inches long in the center front.
9.5 inches long at the princess seam.
9 inches long at the side seam.
12.5 inches long at the center back.
Sizing:
It is generally advised that corsets are ordered approximately 4 inches (10cm) smaller than your natural waist – however if you would like to have your size verified before purchase, you may fill out the measurement form on this page. Please note that this sizing guide is only for the corsets sold on this website, and is not intended to replace a consultation (where external brands are discussed freely).
Contents:
This corset contains two layers of fine-weave poly corsetry mesh, with black satin trim and a YKK zipper which is the best quality available.
All standard underbust corsets contain 20 spiral steel bones and 6 flat steel bones, plus a front fastening busk and back grommets/ laces. Hourglass silhouette corsets have a modesty placket by the busk, and 6 garter tabs instead of 4. A back modesty panel is not included, but we do have separate, boned modesty panels for separate purchase.
Returns and Exchanges:
You have a full 30 days from the purchase date to “try out” the corset and you can return or exchange it as long as the corset does not have any stains, scents, or obvious signs of wear. Just fill out the exchange form, ship it back and I’ll give you a full refund (minus shipping; USPS takes that). Lucy Corsetry does not charge any restocking fee! After the 30 days are over, the corset will not be accepted for refund, but it is still under warranty for life – some wear is normal, but if something prematurely breaks from normal use, your corset is still eligible for exchange. Please see our TOS and Policies for more information.
Nora Keller (verified owner) –
Ok so it’s important to me to seperate the main aspects of the corset.
+ THE DESIGN IS PERFECT. The corset sits well, shapes beautifully and does it’s job exactly as advertised! (after fixing the next few points).
– The material is highly questionable. The mesh “fabric” has a terrible smell that won’t budge (even after a long long airing and a chemical cleaning.).
– There were badly finished edges which are sharp as glass and will absolutely cut you.
– The ribbon is so cheap that it gave my tanktop literal friction burns on the first lacing.
– The pull tab of the zipper head is quite large and will show under clothing.
I finished the faulty edges by hand, invested into 7m of satin ribbon and replaced the pull tab with a loop of 3mm satin ribbon – And I will wear the hell out of it! (As soon as I found a way to tame the aroma.)
The concept is fabulous, but for that price the manufacturing needs some serious QA.
Lucy –
Hi Nora, thanks for your honest review! Interestingly, my shop platform gave me the option of whether or not to publicize your review (presumably because low-star ratings hurt the health of the site) but I believe transparency is more important than SEO and you bring up some good points.
Thanks again for this great discussion, Nora. I will also forward your notes to the design team and manufacturer and see whether any of your suggestions can be adopted into later versions of the design!