This entry is a summary of the review video “Review: Custom Silver Ribbon Cincher (Court of the Emerald Queen)”. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here. See the quick stats in the table below the video, and my written personal opinion at the bottom!
|Fit, length||Custom drafted to my measurements: Center front is 13 inches long, princess seam is 11 inches (5.5 inches from the waist up, 5.5 inches from the waist down), the side seam is 10.5 inches and the center back is 13.5 inches long — longer than the average ribbon corset.
Rib spring is 7″, hip spring is 12″. Ribs are relatively conical and brings in the floating ribs, hip is more curved than usual in a ribbon cincher.
|Material||Essentially one layer of synthetic ribbon. Vertical panels at center front, side, and back are lined in black herringbone coutil.|
|Pattern||Ribbon cinchers may be considered one of two ways: all horizontal pieces are considered a single pattern piece (in which case there are ~2 main “pattern pieces”) or you can consider every piece of ribbon its own pattern piece (in which case this corset has 14 “pattern pieces”) and the vertical ribbons don’t necessarily affect the shape.|
|Construction||Straightforward single-layer construction; the horizontal ribbons are sandwiched between layers of coutil in the vertical panels at the center front, side, and center back.|
|Waist tape||By default, most ribbon cinchers do not have a waist tape – however, if one single long piece of ribbon were used at the waistline (not cut into individual pieces at the seams), this would essentially function identical to a waist tape.|
|Binding||Instead of separate binding sewn onto the vertical panels, Urszula chose to fold under the ribbon and stitched tidily to make a kind of “self binding” and finish the raw edges. The horizontal ribbons don’t need any binding as their edges are finished.|
|Modesty panel||Back modesty panel is boned and suspended on the laces, 5.5″ wide, made from two layers of black coutil. A vertical piece of ribbon runs down the center so that if the corset were worn with a >2.5 inch gap, the modesty panel would match the rest of the corset. The modesty placket in front is 3/4″ wide, made from matching ribbon, and the center front is expertly mirror-matched (a great attention to detail).|
|Busk||Standard flexible busk (1/2″ on each side), 11 inches long, 5 loops and pins with the bottom two closer together for better control at the lower tummy. Adjacent flat steels add more rigidity.|
|Boning||16 bones total in this corset, 8 on each side (not including busk or modesty panel). On each side: one flat steel adjacent to the busk, 3 flat steels in the center back panel, and 4 spiral steels all butted next to one another in the side panel.|
|Grommets||There are 28, two-part size #0 grommets (14 on each side). They have a medium flange and are spaced a bit closer together at the waistline, and finished in silver. They may be Prym brand 2-part eyelets, which are high quality and tend to roll nicely and not pull out.|
|Laces||The laces are 1/2″ wide black double-faced (DF) satin lacing. They have no spring or stretch, they are lovely and flat so they wear nicely under clothing, the satin is a bit slippery but it holds bows and knots well (if tied properly).|
|Price||The price for a custom ribbon cincher from the Emerald Queen Art ranges from $170 – $250 USD, and of course since this is a custom commission, you can choose any ribbon that Urszula can source, or possibly provide your own if it’s high enough quality. You can start a custom commission by messaging Emerald Queen Art on Etsy.|
I’m going to get right to the point: this is my new favorite ribbon corset. As I progress through my corset journey, I find more and more that I’m gravitating towards more lightweight, flexible, breezier corset with an expertly patterned silhouette designed for cinching while accommodating my body’s natural idiosyncrasies, instead of working against them or forcing my body into a silhouette not right for my frame. And this custom ribbon corset felt almost like a second skin the moment I put it on.
Most ribbon cinchers are somewhat U-shaped in silhouette and are not designed to accommodate any convex curves around the ribcage or dramatically wrap around a hip shelf, but Urszula (the Emerald Queen herself) has somehow discovered a way to do it.
View this post on Instagram
Did you catch my latest review on Tuesday? I reviewed this amazing custom silver ribbon cincher by @emerald_queen_art . Looks like armour and feels like air! I also did a 4-hour car trip in this corset with no issues because it’s so flexible. 🖤 Link in my bio will take you to my latest video! . . . #customcorset #realcorsetsrealpeople #realcorset #tightlacing #ribboncincher #emeraldqueenart #authenticcorset #tightlacer #size22corset #corsetreview #lucycorsetry
I love how Urszula mirror matched the vertical ribbons in the center front and center back – a fantastic attention to detail. It might seem like a small thing to others, but to incorporate a modesty placket in the front (thus creating a structurally asymmetric garment on the left and right halves) but still a thoughtfully mirrored center front aesthetically requires some planning and careful placement.
One thing that I love about this corset is the flexible busk and how it plays with the pattern and silhouette of the corset itself, creating a soft inward curve at the center front while still keeping the lower tummy relatively flat. Some of you may remember my previous post on how different corsets create different silhouettes in the side-view, which many consider a feature and not a bug. While I usually like a corset with a more rigid busk and straight front, I have to admit that the profile in this corset and the slight curve in the front is both comfortable and flattering on my figure.
While the modesty panel contains plastic bones instead of steel bones, I don’t mind this — I’ve seen plastic bones in modesty panels of other corset brands (and in fact, in previous sewing tutorials, I have used plastic myself to stiffen modesty panels). The primary concern around plastic bones is that they may warp or kink when put under a strong curve on the body — but when it comes to modesty panels, they typically don’t curve on the body much at all, unless you count the gentle swoop of the lumbar curve. The biggest advantage to plastic bones in a modesty panel is that the panel can be removed and hand-washed on a regular basis without worry of the bones rusting with repeated exposure to water.
Emerald Queen Art has extremely affordable prices for custom (it’s a well-observed trend that many corsetieres in Poland tend to offer lower prices), where her custom corsets can be less than many higher-end OTR corsets. This would be a great entry-point option for someone just starting to dip their toe into the world of bespoke corsetry. You can start a custom commission by messaging Emerald Queen Art on Etsy.
Do you have a piece by The Court of the Emerald Queen? What do you think of it? Leave a comment down below!