Glamorous Corset “Lara” Waist Trainer Review
This entry is a summary of the review for the “Lara” waist training underbust corset in black mesh, made by Glamorous Corset. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:
|Fit, length||Center front is just short of 12.5 inches long, princess seam is 9.5 inches (5 inches from the waist up, 4.5 inches from the waist down), the side seam is 10.5 inches and the center back is 12.5 inches long.
Rib spring is 7″, lower hip spring is 10″. Ribs are on the conical side. This is a “mid-hip” corset, which covers the iliac crest slightly, but this corset can still be worn by those with an average length torso.
|Material||Feels like 2 layers of black cotton bull denim (center front panels were more heavily interfaced than the other panels).|
|Construction||6-panel pattern (12 panels total). Panels 1-2 converge and taper towards the lower tummy. Panels 3-4 provide space over the hips.
Panels were assembled using the welt-seam method.
|Waist tape||One-inch-wide waist tape, stitched “invisibly” between the two layers. Full width (extends from center front panel to center back).|
|Binding||Matching bias strips of black bull denim, machine stitched on both sides. The topside was stitched in the ditch and the back has a top stitch. Also 6 garter tabs (3 on each side).|
|Modesty panel||6.5 inches wide, unstiffened, made from 2 layers of black cotton bull denim. Attached to one side of the corset with a line of stitching (easily removed if desired). In the front, there is a ¼ inch wide modesty placket, also finished in black cotton.|
|Busk||11” long, with 5 loops and pins, the lower two a bit closer together. Standard flexible busk (no adjacent bones by the busk).|
|Boning||24 bones total in this corset, 12 on each side. Double boned on the seams with ¼ inch wide spirals. The bones sandwiching the grommets are flat steel (stainless steel, so they attract the magnet slightly less).|
|Grommets||There are 24, two-part size #00 grommets (12 on each side). They have a small / medium flange and are spaced equidistantly, and finished in silver. The washers are larger than the top-hat side (which is a perk). Many splits on the underside of the grommets, but due to the choice of laces, they don’t catch too much.|
|Laces||The laces are black, ¼” wide flat nylon shoelace. They are a bit springy / spongey, but they hold bows and knots well and they are long enough.|
|Price||Available in sizes 18″ up to 40″ closed waist.
Sizes 18″ – 30″ are $79 USD, and sizes 32″ – 40″ are $84 USD.
Only available on the Glamorous Corset website here (this ref link will give you 15% off your first purchase).
This is a heavy duty piece, so if you’re looking for a “little black corset” or entry-level trainer that’s more on the rigid or thicker side, you may like this one. Its conical silhouette and gently rounded hip offer a lovely silhouette, but if you have inflexible or sensitive ribs that can’t tolerate a conical rib corset, you might want to start with a different style instead.
If you like the silhouette and length or this corset but prefer a more lightweight and flexible version, it comes in mesh as well. While I haven’t reviewed the mesh Lara per se, take a look at my Jolie mesh review so you know what to expect from the Glamorous mesh pieces.
This corset also came in a lovely velvet drawstring storage / dustbag, which I always like.
Find the Glamorous Corset Lara and other training corsets in their shop here (using this referral link will get you 15% off your first purchase).