This entry is a summary of the review video “Review: Orchard Corset CS-426 Mesh Longline”. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:
|Fit, length||Center front is 13.5 inches long, princess seam is 11 inches long, center back is 13.5 inches long. (A bit longer than their non-mesh longline CS-426 corsets.)
Rib spring is 7″, and lower hip spring is 14″.
The silhouette is hourglass, but the flexible mesh allows for more contouring around curves = giving more of a rounded ribcage, and hips of the corset can contour around your own hips, whether your hips are slanted or shelf-like.
|Material||Single layer of fishnet style black mesh, and the boning channels / are made with 2 layers of black cotton twill.|
|Construction||Likely still a 6-panel pattern (12 panels total), but because of the boning channels in the middle of the panels, it means that the corset “appears” to have closer to 20 panels.|
|Waist tape||One-inch-wide full waist tape running through the corset from center front to center back, made from grosgrain ribbon, sandwiched between the boning channels.|
|Binding||Binding at top and bottom are made from matching black cotton twill. Machine stitched on both sides, stitched in the ditch (between the corset and the binding) in front, and a necessary top stitch on the underside. 6 garter tabs (3 on each side).|
|Modesty panel||There is a modesty panel on the back, made of two layers of black twill. 5” wide and unstiffened, attached to one side with a line of stitching. (You can also remove the tags in the back by removing that seam with the modesty panel, in case you find that the tags show through the mesh)
There’s no front modesty placket in this corset.
|Busk||Standard width busk (half an inch wide on each side) and 11.5” long, with 5 pins (last two are a bit closer together). Orchard’s busks are more rigid (less bendy) than other busks of the same width.|
|Boning||22 bones total in this corset. On each side, 9 of them are spirals about 3/8 inch wide, in single channels, equidistantly spaced. Then there are two flat steel bones, both ¼” wide, sandwiching the grommets.|
|Grommets||There are 24, two-part size #00 grommets (12 on each side). They have a small-medium flange and are finished in silver. They’re spaced equidistantly about 1” apart.|
|Laces||The laces are ¼” wide flat nylon shoe-lace style. I find them to be long enough, a little springy but it “stretches out” and the springiness dissipates over time. Orchard also sells double-face satin ribbon if you prefer.|
|Price||Available in waist sizes 18″ to 40″, in black and in beige mesh.
Sizes 18-32 are $72 USD, and sizes 34-40 are $75 USD, but you can save 10% by using the coupon code CORSETLUCY
Several years ago, when I went to visit Orchard Corset in Wenatchee, Washington, I was invited to test the first sample of the CS-426 mesh longline, before it was released to the public. But over the years I didn’t hear anything about the mesh longline being released for almost 3 years, so I ended up selling off my mesh corset in a sample sale. Then in summer of 2016, I noticed that Orchard had finally released the mesh longline! Without my old sample to review, I had to purchase another one (which ended up being mislabeled by the factory – a size 28″ corset with a size 26″ label) so unfortunately I don’t have the curves to properly fill out the corset in this review – but please refer to the way the old (size 22″) sample fit me back in 2013 in this article / video, if you’d like a better example of how the corset is supposed to look when it properly fits.
One of the things I like about the mesh corsets is that they’re not simply double-boned on the seams, but rather the bones are evenly distributed around the waist – and the bigger the corset size, the more bones are included. While this does affect the price (the bigger corsets contain more bones and require more work in construction sewing on the boning channels, so they cost more), it means that you’re getting more equitable support and quality across all sizes.
One consistent bug I notice is that Orchard Corsets have “bunny ears” that are set 1-2 grommets higher than the true waistline of the corset – this is easy to fix when you get the corset though, by simply re-lacing the corset. I also like to use inverted bunny ears for better control and reduced bowing at the waistline.
Shop for the CS-426 mesh longline corset from Orchard Corset here.