Orchard Corset CS-426 Longline (Hip Ties) Review


This entry is a summary of the review video “Review: Orchard Corset CS-426 (with hip ties)”. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:

Fit, length Center front is 13 inches long, princess seam is 10.5 inches long.
Rib spring is 7″, upper hip spring is 10″, and lower hip spring is 13″, but the hip ties allow the hips to expand to 20+” if needed.
The silhouette is hourglass, with a semi-conical ribcage, and hips of the corset can contour around your own hips, whether your hips are slanted or shelf-like.
Material 3 main layers – I have the black cotton version, so the outer (fashion fabric) layer is black twill, flatlined to a light cotton canvas interlining, and lined again in cotton twill.
Construction 6-panel pattern (12 panels total). Hip flare is patterned into panels 3-4. Constructed with the sandwich method.
Waist tape One-inch-wide waist tape running through the corset, hidden between the layers.
Binding Binding at top and bottom are made from matching black cotton twill. Machine stitched on both sides, stitched in the ditch (between the corset and the binding) in front, and a necessary top stitch on the underside. 8 garter tabs (4 on each side).
Modesty panel There is a modesty panel on the back, made of two layers of black twill. 6” wide and unstiffened, attached to one side with a line of stitching, reinforced with “hemming tape”.
There’s also an unstiffened black twill modesty placket extending from the knob side of the busk ( ¼” wide).
Busk Standard width busk, half an inch wide and 11.5” long, and 5 pins (last two are a bit closer together). However it’s more rigid (less bendy) than other busks of the same width.
Boning 22 bones total in this corset. On each side, 9 of them are spirals about 3/8 inch wide and then there are two flat steel bones, both ¼” wide sandwiching the grommets.
Grommets There are 24, two-part size #00 grommets (12 on each side). They have a medium flange and are finished in silver. They’re spaced equidistantly about 1” apart.
Laces The laces are ¼” wide flat nylon shoe-lace style. I find them to be long enough, a little springy but it “stretches out” and the springiness dissipates over time. Orchard also sells double-face satin ribbon if you prefer.
Price Available in waist sizes 16″ to 46″.
Sizes 16-32 are $82 USD, and sizes 34-46 are $87 USD, but you can save 10% by using the coupon code CORSETLUCY

 

Final Thoughts:

Orchard Corset CS-426 Hip Ties, $82, modeled by Caylyn

Full disclosure, this corset contains my “Lucia Corsetti” label – back in August of 2013, I released a tutorial where I took one of Orchard’s original 426 longline corsets and simply added hip ties to them, so people with a naturally fuller hip spring could cinch down in their corset without compressing their hips. Orchard liked the idea so much that they put it into production, and they gave me credit for the idea by adding my label to the new design. (I have no patent on the hip ties design, but it was courteous of them to give me a nod!)

This is the second time I’ve reviewed a CS-426 corset, after my first time in 2012, and there are marked improvements in the construction – particularly the grommets. These grommets don’t tarnish and have fewer splits compared to the older corsets). If I’m not mistaken, Orchard Corset had switched manufacturers a couple of years ago, which may account for the change.

Other changes include the modesty panel in the back being a touch wider, the addition of a modesty placket in the front, and a slightly longer busk.

Find the CS-426 Longline corset with hip-ties on Orchard Corset’s website here.

Leave a comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Notice: There should no longer be delays in the corset shop - however if you have a deadline or special event and need rush/overnight shipping, please email me. Thanks! ~Lucy Dismiss