Lovely Rats Princess Corset Review
This entry is a summary of the review video “Lovely Rats Princess Corset Review” which you can watch on YouTube here:
|Fit, length||This style is standard sized: Center front is about 11.5 inches high, from underbust to lap is 9 inches, and the center back is 11 inches. Conical ribcage and rounded hip. Waist in this corset is 22″, ribcage is 28″ and lower hip is 36″.
NOTE: updated standard size measurements for a size 22″: ribcage of 30″ and lower hip of 34″.
|Material||This style of corset has 2 main layers, and external boning channels (instead of 3 layers with sandwiched bones like her Christine Corset). Outer layer is a cotton floral fabric, which is fused to black herringbone coutil.|
|Construction||6 panel pattern. The fashion fabric and lining were fused, and the panels were assembled with seam allowances facing outward. External boning channels cover the seam allowances, and more external channels are distributed in the middle of the panels as well.|
|Binding||Bias strips of black twill, machine stitched on the outside and hand-finished inside for a couture finish.|
|Waist tape||1 inch wide exposed waist tape. Partial: starts at the seam between panels 1-2, and goes to the back edge.|
|Modesty panel||Back modesty panel (4 inches wide) is suspended on the laces and boned for support. Front modesty placket is made from black herringbone coutil.|
|Busk||Heavy-duty busk (1″ wide on each side), 10 inches long. 5 loops + pins, equidistantly spaced. Some flat steels adjacent to the busk helps keep the abdomen flat.|
|Boning||24 bones total, 12 on each side. There are eight 1/4″ wide flats by the front, four flats by the back grommets, and the remaining bones around the side of the body are 1/4″ spirals, single boned on the seams and also in the middle of each panel.|
|Grommets||24 two-part grommets, size #00, medium flange, quite sturdy. Gold finish. Set closer together at the waistline. Large washers on the underside, most of them have rolled nicely without splitting or cracking.|
|Laces||Black double-faced satin ribbon: no spring, very strong, low-profile under clothing and easy to tie.|
|Price||$350 USD as of 2016. To upgrade to custom-fit, this starts at $450 USD.
Decorative external boning channels are another $50-75.
Flossing on each of the boning channels is an additional $100.
Amber’s corsets have a distinctive silhouette; normally conical in the ribs and rounded over the hips, stopping at mid-to-low hip. The front of her corsets are extremely rigid while the back of her corsets tend to be more flexible – a pattern she developed on her own to accommodate for her own pronounced lumbar lordosis. As such, if you have lordosis or if you have a “shelf-bum” and you need more curve over the back, Amber will know how to draft for your body.
Amber herself is a joy to work with. Her service and communication were excellent throughout this past collaboration, and she is fun yet professional. During the construction process we had an easy rapport and she asked me whether I would like regular updates on the corsets or if I preferred to be surprised. When I preferred having pictures, she shared with me without prompting. She worked quickly and efficiently, and can make a simple, standard sized underbust corset in one workday! However, her schedule fills up quickly, so if you’re keen on ordering from Lovely Rats for a special event, join her waiting list early.