This post is a summary of the “Corsets Boulevard Global Corset Overbust review” video, which you can watch on Youtube if you prefer:
|Fit, length||Center front is 16.5 inches long (due to the tabs that extend down in the front), the princess seam (where you see the highest part of the sweetheart of the bust) is 16 inches long, the side seam is 15.5 inches, and the enter back is shorter at 13 inches. Circumferential measurements: waist is size 24″, full bust is between 34-35 inches, high hip (iliac) is 34-35 inches as well, and the low hip at the lap is about 37 inches in circumference. The silhouette is relatively curvy, definitely a traditional hourglass.|
|Material||Fashion fabric is black satin (but can be specially ordered in any color satin), the strength layer is black twill.|
|Construction||6 panel pattern (12 panels total). Most of the ease for the bust is in panels 1-2, and most of the ease for the hip is in panels 3-4. The construction is the “welt-seam” method, which is different from a normal topstitch. The corset is double boned on the seams, and sandwiched between the layers.|
|Binding||Commercial strips of 1-inch-wide black satin ribbon (so it wasn’t folded under; the edges of the ribbon were left raw). There are 6 garter tabs.|
|Waist tape||No waist tape (at least, none could be detected when I inspected the corset carefully).|
|Modesty panel||Modesty panel is around 5″ wide (will cover a back gap up to 4 inches wide) and finished in the same black satin as the fashion fabric. It is unstiffened, and stitched to one side of the back of the corset (can be removed if desired). Unstiffened front modesty placket under the busk, again finished in black satin.|
|Busk||14.5 inches long with 8 loops and pins, equidistantly spaced. Standard flexible busk (half inch on each side).|
|Boning||24 total bones not including busk. 1/4″ wide spirals, double boned on the seams. Two further 1/4″ wide flats sandwich the grommets on each side, making a total of 12 bones on each side.|
|Grommets||26 grommets total, size #00 with a small flange and finished in silver. Set equidistantly, about an inch apart.|
|Laces||Black round cord, it is small enough and slick enough to slide through the grommets, but I find that they snag more than flat laces.|
|Price||£55 or around $68 USD|
This corset is definitely one of the least expensive overbust corsets for curvier wearers, offering a 10-11 inch bust spring, and a 13 inch low hip spring. This brand also offers a large range sizes for this corset, from 18″ up to 40″.
I also appreciate how high the corset comes up over bust, and continues high around the sides to control my “armpit squidge”. In the back it comes down a little lower, but not so low as to accommodate very low-back dresses.
The busk keeps my tummy flat, and doesn’t seem to bow outwards. Having 8 loops and pins, it’s one of the longest corsets I’ve tried to date!
The one feature I wasn’t crazy about are the flaps in the bottom of the center front which are not supported by any steel so they can bend upwards (and therefore don’t offer much in terms of function or support). I believe these to be a nod to the antique Edwardian suspender corsets, but obviously the suspenders/ garters were omitted in this style so the flaps is a bit “vestigial”.
Other overbust corsets of equivalent curve (and support for large cup sizes) tend to average around $300 USD, even for ready-to-wear. Yes, the satin of this piece isn’t quite as lush, and the stitchwork isn’t as pristine as the other brands — don’t expect this piece to live up to the standards as the others — but at its current price, it’s filling a place in the corset industry that other brands aren’t.
I wouldn’t personally waist train in this corset, due to the apparent lack of waist and due to the construction method causing one bone out of each pair being essentially held in by the satin fabric instead of being securely sandwiched into a denser weave cotton (there may be a risk of a steel bone popping through the fabric if this is worn daily for weeks or months). But it would be great for occasional use, special events, and possibly to use as occasional relief from a heavier bust.
On the Corsets Blvd Global site, this curvy overbust in black satin is named the “Keira” corset, and if you get it before February 15, 2016, it will be £55 or around $68 USD currently. Find the corset here.