Posted on 11 Comments

Sizing Down in your Corset, plus What to Do with your Old, Bigger Corset

Last updated on January 6th, 2017 at 03:18 pm

When you’re waist training, sizing down is a natural part of the process. Your first corset may be 4-6 inches smaller than your natural waist, but what happens if and when you “outshrink” your first corset, and you still want to train down further? How do you know when it’s time to get a new, smaller corset? Read ahead, or watch the video linked below (which gives the same information):

(Please note that sizing down is in the context of someone who is actually waist training; if you’re just an occasional corset wearer or you have no desire to size down, just disregard this post!)

When do I know it’s time to size down in my corset?

I suppose the question to precede this one is when do you know that a corset is fitting correctly before you even size down? We’ve discussed corset gap shapes and other fitting issues, but what about the size of your corset gap? A new corset that properly fits often initially has a gap of 2-4 inches (if it’s designed to eventually close completely in the back), or possibly a slightly larger gap of 4-6 inches (if the corset is designed to always have a small gap in the back, which some corsetieres do draft for). If you ever put a corset on for the first time, lace it loosely (as in the case of seasoning it), and it closes all the way in the back from top to bottom, your corset is probably too large to begin with and you need to size down immediately. Let’s say you’ve started with a well-fitting corset though, and you’ve been wearing it for several months. Today, for the first time, you were able to close your corset fully from top to bottom! Congratulations – do you go out and buy your next corset that very day? Not yet.

I would say that it’s time to size down when you can do one or more of the following:
  • you can easily and consistently close the corset every time you put it on, for at least a month.
  • your ability to close the corset is typically not affected by your menstrual cycle, water retention, small weight fluctuations or other natural fluctuations.
  • you can stick an arm down inside of the corset while it’s closed, or perhaps pull your abdomen away from internal wall of the corset while sucking in.

In the next post in this series, I will discuss what to consider when sizing down choosing your next, smaller corset. But for now, let’s discuss what you can do with your old corset that you no longer need as a primary corset:

What can you do with your old corset?

Can you alter your corset to be smaller?

Theoretically yes, but if you don’t sew, good luck finding a corsetiere who is willing to alter another person’s work. Many corset makers would rather make a new corset from scratch, rather than modify an old one – this is because if you want a “perfectly” altered corset that has no evidence of alteration, you’d have to:

  1. make friends with your seam ripper, and then:
  2. remove the binding
  3. remove the bones
  4. take apart the seams (and hope that the fabric survives this trauma as the seamlines are now perforated)
  5. likely cut through the waist tape (which weakens the corset), or put in a new, smaller waist tape
  6. reshape every panel (it’s not a good idea to do just one seam, if you want to ensure that the hips are not angled forward or backward in the end product)
  7. put the corset back together again, including reassembling the panels, adding the smaller waist tape, inserting the bones, and adding the binding!

Personally, I don’t consider this level of alteration worth the time or frustration when I can make a new corset in half that time! If you’re still interested in seeing how other people “took in” their corsets so they’re smaller, check out this video by CorsetRookie who sewed darts and pleats into his Axfords corset, although I should note that by doing this (especially in a thicker corset) the pleat may form a ridge or bump that can be felt when you’re wearing the corset and may result in pressure points. Another alteration walk-through by Snowblack Corsets shows her taking a larger WKD corset and cutting it down smaller and curvier, and adding embellishment like external contrasting channels and lace.

So, if you don’t feel like altering your old corset to be smaller, what can you do with it?

Click here to learn more about sleeping in your corset!
Click here to learn more about sleeping in your corset!

1: Use your old corset as a night/ sleeping corset.

If you have ever tried sleeping in your corset, you may find you’re the type who needs to loosen the laces a little when you sleep. So if you buy or make a new, smaller corset, you can designate the old larger one as a sleeping corset. Sleeping in a corset can be a bit traumatic to the corset (it can cause warping or abrasion) but since your old, bigger corset is no longer your primary training corset, you don’t have to worry as much about getting dander or oil on it, or if the satin fabric sees any thinning or wear if you’re rolling around and putting uneven pressure on it through the night.

2: Trade or sell your old corset 2nd hand.

If your old corset is still relatively good quality, you can sell it second hand or trade for a different corset! There’s a ton of old corsets sold on Ebay or Craigslist, and if your corset is more than 20 years old, it qualifies as an “Vintage” item on Etsy. There are also corset sale groups on Facebook, Tumblr, and my own consignment shop (the Bronze Line) as well. You can use the funds from selling your old corset to put towards your new corset! Before listing your corset, do some research into how much similar-quality corsets are being sold for. Presuming that your old corset is still decent quality/ wearable, then a 2nd hand corset will often sell for 50% – 75% of the original price (depending on who made it and how rare it is).

3: Cannibalize your old corset for materials for future sewing projects.

This corset had been sacrificed for hardware.
This corset had been sacrificed for hardware.

If your corsets are in poor condition and not appropriate for resale (and they don’t hold much sentimental value for you), then you can harvest parts of your old corset to be recycled in new corsets. Hardware like the busk and bones can be used over and over again for mockups or in future completed corsets as long as they’re not rusted or warped, and salvageable embellishments like large pieces of lace appliqué or crystals may be reused as well. You can also cut out the grommet panel of your old corset (making sure you leave a seam allowance) and you can quickly and easily sew that grommet panel onto all your future mockups and toiles, saving you time and grommets. There you have it – how you know when to size down from your current corset, and three suggestions of what to do with your old corsets. What are your requirements as to when to size down, and what do you do with your larger corsets? Let me know in a comment below!

11 thoughts on “Sizing Down in your Corset, plus What to Do with your Old, Bigger Corset

  1. So I bought my first corset from a pretty cheap online store, and it came in too big for me and I don’t want to go through the hassle of sending it back. It doesn’t really have panels, its just fabric with bones. Do you think it would be possible to just simply remove a couple of bones from the back and replace the eyelets?

    1. Hi Sabrina, the side seams of the corset should match up with the sides of your body. If you end up taking out panels only at the back, then the “hips” of the corset will probably be angled a bit too far back compared to your body, and the fit will be a bit awkward or uncomfortable. If you’d like to take in your corset, I would recommend removing fabric from both the front and the back in equal amounts.

  2. You have answers to all of my questions! All I need to do is put search words in google prefixed by Lucy Corsetry and they come up!
    Thank you x

    1. Hi Erika, this is the best comment! Thank you so much, I’m so glad you’ve found my site helpful. :)

  3. Hello again- I just saw your second video on my previous question and I believe I have my answer. Thank you for having such informative videos.

    1. Hi Heather, whoops! I’m so glad you got your answer! :) Thanks for letting me know!

  4. I’ve fallen in love with two new corset colors that are limited editions by OC. Do you every buy in the next size down if you love a particular color with the idea you’ll eventually close the one you’re currently working on and need to size down? Do most people just size down one size from when the corset is closed or do you do the 4-6 inches depending on squishiness factor again? I’ve yet to size down but am desiring to recommit to the process.

    1. Hi Heather, I have an add-on article to this called “How Much to Size Down” which might help!

  5. Hi, I would like to know were I can go and have a corset made for me . I know nothing about corsets and would need to relay on the professional and honesty of the maker. I live in St Clair shores Michigan 48081.

    1. Hi Janice, at the moment I am not doing custom commissions, however please check the corsetiere map to find information about corsetieres who live near you. There are several in Michigan, I have worked with Ties that Bynde and she does great work.

  6. I decided to alter my old corsets! I’d had two 19″ for a year – the Josephine and a satin/lace sample from Deathless Corsets, both very pretty, but they started feeling loose. I just could not part with them)) But taking corsets apart is too difficult for me, so I decided to sew darts into them as far as the panels allow. Well, it’s worth the effort – now I have two 17.5″ corsets :) And they actually feel more comfortable – when a corset is tight on the hips and ribs and loose at the waist, it tends to ride up and put the pressure on the ribs instead – and now it’s been fixed. Thanks for the tip!

Comments are closed.