“True Corset” Dragon Brocade Cincher Review
This post is a summary of the “True Corset” Dragon Brocade Cincher Review video, which you can watch on Youtube if you prefer:
|Fit, length||Front is about 9″ inches long, as well as the sides and back because they are all cut to be the same height. I consider this a modern slim silhouette; the ribcage is about 5″ bigger than the waist, and the hips are about 7″ bigger than the waist. Recommended for people of shorter stature or shorter waists. If you have any issues with lower tummy pooch, choose a longer corset as this one doesn’t extend down to cover the lower abdomen.|
|Material||2 main layers: fashion fabric is red and gold on black dragon brocade, inside has a “bull-denim” style cotton lining (a bit coarser than twill). The internal boning channels are likely petersham ribbon.|
|Construction||5 panel pattern. Top-stitched between the channels, single boned on the seams, with internal boning channels.|
|Binding||Commercial black satin ribbon, not folded under. Machine stitched on the outside and inside.|
|Waist tape||1-inch wide black satin ribbon, exposed on the inside of the corset. It does not extend through all panels though; this waist tape starts between panels 1-2, and ends between panels 4-5.|
|Modesty panel||5.5 inch wide modesty panel at the back, unstiffened, attached to one side, and covered in matching dragon brocade. Un-boned modesty placket made from black denim under the busk.|
|Busk||8.5 inches long with 5 pins (equidistantly spaced). Fairly stiff, just short of 1″ wide on each side.|
|Boning||10 total bones not including busk. On each side there are three 1/4″ spiral steel bones (in internal channels), but no bone on the seam between panels 4-5. Two further 1/4″ wide flats sandwich the grommets on each side.|
|Grommets||20 grommets total, size #00 two-part grommets with small flange; set equidistantly. The brocade is fraying around the grommets unfortunately. However the bull denim underneath are still holding the grommets so I will watch them and see if they need replacing. A few split grommets, but doesn’t catch the back.|
|Laces||1/4″ black flat braided nylon shoe-lace style laces. Virtually unbreakable. Has a bit of spring.|
|Price||At the time that I’m writing, it is £40 in the UK or $60 in the US.|
This cincher is designed for beginners, as it has an attractive price and an un-intimidating silhouette. Unless you have quite narrow hips, I would now recommend ordering a size up from what you’d usually get (or what would usually be recommended to you) from an OTR corset company, because the modern-slim silhouette doesn’t accommodate a huge waist reduction. I initially went with a size 22″ but in retrospect I would have gone with a size 24″ instead, as I like my corsets to be more closed in the back.
I had originally requested this piece in black taffeta but I was sent the dragon brocade instead. I notified the True Corset company by email, even if it only resulted in them fixing the number of corsets in their stock. They were quite gracious and acted quickly to fix the mistake. Although I ended up keeping this piece in the end (shipping things over the US/Canada border is expensive), I appreciate that True Corset had such responsible customer service.
Unfortunately, the brocade was on the delicate side and began to fray around the grommets. The grommets haven’t pulled out completely, because the sturdy bull denim lining is currently keeping them in place – but I will keep an eye on this corset and see if there are any changes in the future. In a later post I will show how the taffeta underbust by True Corset seems to hold the grommets in a little better. I’m not sure if this is due to the taffeta having a denser weave, or if it is due to the slightly different construction of their “waist training” style corsets; nevertheless they seem to be holding fast – but if you’re considering this piece and are truly indifferent about the fashion fabric, I would recommend the taffeta instead of the brocade.