Last updated on April 3rd, 2021 at 07:09 pm
This entry is a summary of the review video “Heavenly Corsets “Wasp-Waist” Training Underbust Review”. If you would like more complete information and side notes about the corset, you can watch the video on YouTube here:
Note: the following are the differences between the “standard” wasp-waist corset and the “training” wasp-waist corset:
|Training Corset||Standard Corset|
|Materials||Always made in coutil, with an inner layer of twill, and a cotton lining layer||Either a layer of outer fabric (unless coutil) with an inner layer of twill and cotton lining layer OR if you chose coutil, a single layer of coutil and a cotton lining layer|
|Boning||double boning throughout||6 fewer bones than the trainer|
|Busk||wide solid steel busk||standard steel busk|
|Modesty Panel||included||NOT included|
|Seams||triple-stitched seams||double-stitched seams|
And here is my review:
|Fit, length||Dramatic curves, “wasp-waisted”. This is a longline corset coming over my hips. The center front is 12” high. Measurements (both circumference and vertical) were taken to fit my body; quite comfortable with no pinching. One issue with the bones in the back bowing outwards and twisting so creates a gap at the waistline.|
|Material||3 main layers. The outer fashion fabric is red satin coutil, twill interlining and lightweight cotton lining inside.|
|Construction||6-panel pattern. It looks as though the coutil panels were lock-stitched (stitched twice) at the seams, the allowances were pressed open and zigzag stitched again. (Some people may not find this aesthetic but if it makes for a strong corset then I don’t mind.) Bones are sandwiched between the satin coutil and the twill, and the cotton lining is primarily floating.|
|Binding||The binding at top and bottom are made out of commercial red satin bias tape machine stitched on both sides; it’s folded under and stitched in the front and then topstitched to catch the back.|
|Waist tape||1” wide twill tape between the lining and the twill interlining. Stitched down horizontally across all the panels of the lining (so is not invisible but still cannot be felt).|
|Modesty panel||Unboned modesty panel, 4.5 inches wide made from satin coul on the outside and lightweight cotton on the underside. No placket beneath the busk. (I would have preferred a slightly wider panel.)|
|Busk||A heavy duty busk, 1” wide on each side, with 5 pins, it’s quite stiff and it’s 11” long.|
|Boning||22 steel bones in this corset not including the center front, ALL flat bones. The seams between the panels are double-boned (except the seam closest to the busk) with 3/8 inch wide flats (slightly wider than ¼”), but on the outer edge of the grommets in the back those bones are ½” wide flats.|
|Grommets||There are 20 2-part size #00 eyelets (10 on each side). They have a medium flange around and are spaced out 1¼ inches apart. I would prefer for them to be spaced closer together and there be more of them, but functionally they’re sound; no pulling away or fraying of the fabric. On the underside there are no splits.|
|Laces||¼” wide flat braided cotton laces, NOT nylon. They’re easy to pull and they grip well, not much wear so far. Cotton laces are sometimes prone to snapping so should be replaced more often, however I’ve had this corset for about 9 months and haven’t had to change the laces yet.|
|Price||Currently £160 ($250) for the 23/7 waist training wasp-waist corset, or £120 ($185) for the non-training wasp-waist corset.|
I received a mixed reaction from this review. A few previous customers of Elle came forward and told me that they didn’t like certain aspects about this style of corset, such as a wobbly stitch line here or there, or the fact that she uses all spring steel bones. I put all this into perspective. Back in 2012, I hadn’t found a more affordable 23/7 training piece, and the materials used (including English coutil) are quite high quality. From what I can see, the primary stitch lines (the straight ones, holding the panels together) are straight and even, and although the zig-zag stitching (which is technically the 3rd stitch on each panel) does veer a bit and is not aesthetically pleasring, it still serves its purpose – to further reinforce the panels together. At that point in the construction process, it has no effect on the overall shape or measurement of the corset.
This did not come as a surprise to me, because I asked Elle a thousand questions before I ordered (and she was quite patient with me every time). The purpose of this corset (for me) wasn’t meant to be pretty or be shown off on a regular basis, it was meant to be strong.
Edit December 2014:
It’s been about 4 years since I ordered this corset, and nearly 3 years since the review – truthfully, I had forgotten about this corset review until recent events brought it back to my attention.
How did my corset hold up? The seams remained strong and none of the bones wore through their channels, but the very flexible bones in the back by the grommets became annoying, so I ended up switching them out for stronger (but more narrow) 5.5mm steels from Vena Cava. I also added more grommets between the pre-existing ones in the back of the corset for better control (the size #00 self-piercing grommets that fit the C-Step 2 machine are a decent match), and changed the lacing style. This was the only issue I experienced with my corset. However, other clients of Elle have had different experiences than myself, and I encourage you to read some of the comments below so you can gain a balanced view before deciding.